prEN 16727-2-1

Scope

This document describes the basic requirements for the verification of ultimate and serviceability limit states and the resistance to fatigue either of the noise barrier or its components by means of analytical methods and/or tests. Analytical methods can be used for the determination of the characteristic values and design values. Where sufficient information is not available, the analytical procedure can be combined with results from tests. This document provides the following types of test procedures: - test on small samples for defining detail categories, which may not be covered by Eurocodes (verification procedure A); - test on a global element for defining the limit state against fatigue (verification procedure B); - full scale tests under a given representative loading (verification procedure C) to determine fatigue resistance of the noise barrier components for defined loading conditions; verification procedure C is given as alternative to verification procedures A and B.