GDPR

projektai-lsd Lithuanian Standards Board
Portal for draft standards

Extended search

till

Results

Showing:
prEN 50121-4:2025 Public enquiry
Comment end date 2025-10-08
Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus

This document applies to signalling and telecommunication apparatus (including power supply system belonging to signalling and telecommunication apparatus) that is installed inside interlocking locations, wayside cabinets and other wayside locations including platforms (including vital equipment such as interlocking, signals, point machines, level crossing, etc.). This document specifies limits for emission and immunity and provides performance criteria. The standard does not specify basic personal safety requirements for apparatus such as protection against electric shock, unsafe operation, insulation co-ordination and related dielectric tests. The requirements were developed for and are applicable to this set of apparatus when operating under normal conditions. Fault conditions of the apparatus have not been taken into account. The test frequency range defined in this document is considered to ensure the electromagnetic compatibility of the apparatus in the whole frequency range from 0 Hz (DC) to 400 GHz.

prEN 50121-1:2025 Public enquiry
Comment end date 2025-10-08
Railway applications - Electromagnetic compatibility - Part 1: General

This document outlines the structure and the content of the whole set. It provides information about the EMC management. It specifies the performance criteria applicable to the whole standards series. This part alone is not sufficient to give presumption of conformity to the essential requirements of the EMC-Directive and is intended to be used in conjunction with other parts of this standard. The informative Annex A describes the characteristics of the railway system which affect electromagnetic compatibility (EMC) behaviour. Phenomena excluded from the set are Nuclear EM pulse, abnormal operating conditions (e.g. fault conditions) and the induction effects of direct lightning strike. Emission limits at the railway system boundary do not apply to intentional transmitters within the railway system boundaries. Safety considerations are not covered by this set of standards. The biological effects of non-ionizing radiation as well as apparatus for medical assistance, such as pacemakers, are not considered here.

prEN 50121-3-2:2025 Public enquiry
Comment end date 2025-10-08
Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus

This document applies to emission and immunity aspects of EMC for electrical and electronic apparatus intended for use on railway rolling stock. prEN 50121 3 2:2025 applies for the integration of apparatus on rolling stock. The test frequency range defined in this document is considered to ensure the electromagnetic compatibility of the apparatus in the whole frequency range from 0 Hz (DC) to 400 GHz. The application of tests depends on the particular apparatus, its configuration, its ports, its technology and its operating conditions. This document takes into account the internal environment of the railway rolling stock and the external environment of the railway, and interference to the apparatus from equipment such as hand-held radio-transmitters. This document does not apply to transient emissions when starting or stopping the apparatus. The objective of this document is to define limits and test methods for electromagnetic emissions and immunity test requirements in relation to conducted and radiated disturbances. These limits and tests represent essential electromagnetic compatibility requirements. Emission requirements have been selected so as to ensure that disturbances generated by the apparatus operated normally on railway rolling stock do not exceed a level which could prevent other apparatus from operating as intended. Likewise, the immunity requirements have been selected so as to ensure an adequate level of immunity for rolling stock apparatus. Test requirements are specified for each port considered. AC and DC traction power ports (see Table A.2) are not covered in this document.

prEN 50121-5:2025 Public enquiry
Comment end date 2025-10-08
Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus

This document applies to electrical and electronic apparatus and systems intended for use in railway fixed installations for power supply with railway function (e.g. not covered are equipment such as fire detection devices installed inside substations, room access devices, air conditioning, lighting systems, etc.). This includes the power feed to the apparatus, the apparatus itself with its protective control circuits, trackside items such as switching stations, power substations for charging of battery on the board of train (auxiliary charging points), power autotransformers, booster transformers, substation power switchgear and power switchgear to other longitudinal and local supplies. Emission and immunity limits are given for apparatus which are situated: a) within the boundary of a substation which delivers electric power to a railway; b) beside the track for the purpose of controlling or regulating the railway power supply, including power factor correction; c) along the track for the purpose of supplying electrical power to the railway other than by means of the conductors used for contact current collection, and associated return conductors. Included are high voltage feeder systems within the boundary of the railway which supply substations at which the voltage is reduced to the railway system voltage; d) beside the track for controlling or regulating electric power supplies to ancillary railway uses. This category includes power supplies to marshalling yards, maintenance depots and stations; e) various other non-traction power supplies from railway sources which are shared with railway traction. Note: Filters operating at railway system voltage (for example, for harmonic suppression or power factor correction) are not included in this standard since each site has special requirements. Filters would normally have separate enclosures with separate rules for access. If electromagnetic limits are required, these will appear in the specification for the equipment. This document specifies limits for emission and immunity and provides performance criteria. The standard does not specify basic personal safety requirements for apparatus such as protection against electric shock, unsafe operation, insulation co-ordination and related dielectric tests. The requirements were developed for and are applicable to this set of apparatus when operating under normal conditions. Fault conditions of the apparatus have not been taken into account. The test frequency range defined in this document is considered to ensure the electromagnetic compatibility of the apparatus in the whole frequency range from 0 Hz (DC) to 400 GHz.

EN 15016-2:2023/prA1 Archived
Comment end date 2025-08-26
Railway applications - Technical documents - Part 2: Parts lists

This document specifies the preparation and reproduction of design parts lists. This document defines the basic principles and structure of design parts lists. This document is applicable to all design parts lists for railway applications.

Quick filters

Technical Committee
TK 1 Electronics (9) TK 4 Information technology (2) TK 5 Electrical engineering (9) TK 6 Fruit and vegetables products (4) TK 8 Electromagnetic compatibility (2) TK 15 Cereals, cereal products, bread and animal feeding stuffs (1) TK 18 Telecommunications (5) TK 19 Concrete and reinforced concrete (1) TK 20 Toys, child use articles, sports and other recreational equipment (8) TK 21 Textiles and personal protective equipment (16) TK 22 Fire safety (3) TK 24 Quality management and quality assurance (2) TK 29 Water supply (9) TK 31 Acoustics (1) TK 32 Health (15) TK 33 Fishery (1) TK 35 Safety of machinery (7) TK 36 Environmental protection (2) TK 38 Building constructions (1) TK 39 Protection (2) TK 43 Railway traffic (16) TK 45 Electric power (6) TK 46 Roofs and building waterproof isolation (1) TK 50 Heating and Ventilation Systems (2) TK 51 Food analysis- Horizontal methods (3) TK 54 Assistive products for persons with disability (1) TK 56 Equipment for petroleum industry (4) TK 57 Fertilizers (3) TK 58 Refractory products and materials (dormant) (3) TK 68 Plastics (6) TK 71 Sustainably produced biomass for energy application, solid biofuel and solid recovered fuel (1) TK 76 Explosive atmospheres (5) TK 77 Lifts (4) TK 79 IT security techniques (2) TK 80 Road transport and traffic telematics (2) TK 82 Safety of trackless overground vehicles (2) TK 86 Geographic information (2) TK 87 Biotechnology (3) TK 98 Digital Product Passport (DPP) (8) TK 99 Health Informatics (1)
ICS
Biologinės dirvožemio savybės (2) Kiti su dirvožemio kokybe susiję standartai (1) Accident and disaster control (1) Acoustic measurements and noise abatement in general (1) Advanced ceramics (1) Aerospace electric equipment and systems (2) Alarm and warning systems (1) Alkaline secondary cells and batteries (1) Anaesthetic, respiratory and reanimation equipment (2) Biofuels (1) Biology. Botany. Zoology (3) Boilers and heat exchangers (1) Bolts, screws, studs (3) Buildings in general (1) Cabled distribution systems (1) Cables (1) Cableway equipment (2) Cereals, pulses and derived products (1) Chemicals for purification of water (8) Chimneys, shafts, ducts (1) Coatings and related processes used in aerospace industry (1) Concrete and concrete products (3) Cranes (1) Diagnostic, maintenance and test equipment (1) Disinfectants and antiseptics (1) Domestic safety (1) Domestic, commercial and industrial heating appliances (2) Earth-moving machinery (4) Electric furnaces (1) Electric road vehicles (1) Electrical and electronic equipment (2) Electrical and electronic testing (2) Electrical apparatus for explosive atmospheres (2) Electrical engineering in general (1) Electronic component assemblies (1) Emission (2) Environmental economics. Sustainability (5) Equipment for children (1) Equipment for the metallurgical industry (1) Explosion protection (1) Fibre optic interconnecting devices (2) Fibres and cables (3) Fire-fighting (1) Fire-resistance of building materials and elements (1) First aid (1) Fishing and fish breeding (1) Floor coverings (1) Food microbiology (1) Fuses and other overcurrent protection devices (1) Gas heaters (2) Ground service and maintenance equipment (1) Hand-operated tools (1) Head protective equipment (2) Heat pumps (3) Indoor sports equipment (1) Irons (1) IT applications in education (1) IT applications in health care technology (1) IT applications in industry (1) IT applications in science (1) IT applications in trade (4) IT applications in transport (2) IT Security (1) Items of art and handicrafts. Cultural property and heritage (1) Lifts. Escalators (1) Luminaires (1) Materials and components for railway engineering (1) Mechanical structures for electronic equipment (2) Metro, tram and light rail equipment (1) Multimedia systems and teleconferencing equipment (1) Non-destructive testing of metals (2) Other cells and batteries (4) Other fibre optic equipment (1) Other rubber and plastics products (1) Outdoor and water sports equipment (3) Petroleum products and natural gas handling equipment (1) Piezoelectric devices (1) Pipelines and its parts for external sewage systems (1) Plastics in general (1) Pressure regulators (1) Printed circuits and boards (1) Product and company certification. Conformity assessment (1) Protection against falling and slipping (1) Protective clothing (9) Radiation measurements (2) Radiographic equipment (1) Railway engineering in general (5) Railway rolling stock in general (1) Rectifiers. Converters. Stabilized power supply (2) Refractories (3) Refrigerating technology (1) RF connectors (1) Roofs (1) Sensory analysis (2) Small craft (1) Small kitchen appliances (1) Solar energy engineering (3) Special wastes (1) Spices and condiments (4) Sports facilities (4) Steel pipes and tubes for specific use (1) Superconductivity and conducting materials (1) Syringes, needles and catheters (2) Technical product documentation (1) TELECOMMUNICATIONS. AUDIO AND VIDEO ENGINEERING (5) Textiles in general (1) Theatre, stage and studio equipment (1) Thermoplastic materials (1) Trailing stock (1) Ventilation and air-conditioning systems (1) Welding processes (1)