GDPR

projektai-lsd Lithuanian Standards Board
Portal for draft standards

Extended search

till

Results

Showing:
prEN 17526 Public enquiry
Comment end date 2026-07-09
Gas meter - Thermal-mass flow-meter based gas meter

This document specifies requirements and tests for the construction, performance, safety and production of battery powered class 1,5 Capillary Thermal-Mass Flow sensor gas meters (hereinafter referred to as meter(s)). This applies to meters having co-axial single pipe, or two pipe connections, which are used to measure volumes of fuel gases of the 2nd and/or 3rd family, as given in EN 437:2021. In general, the term "thermal mass flow meters" applies to a flow-measuring device using heat transfer to measure and indicate gas flowrate, as defined in ISO 14511. NOTE Although the word "mass" is present in the definition of the measurement principle, gas meters covered by this document provide measurement of gas at base conditions of temperature and pressure. These meters have a maximum working pressure not exceeding 0,5 bar and a maximum flowrate not exceeding 160 m3/h over a minimum ambient temperature range of −10 °C to +40 °C and a gas temperature range as specified in the marking, with a minimum range of 40 °C. For meters designed for hydrogen measurement, the maximum flowrate is not exceeding 480 m3/h, whilst the other characteristics are as stated above. This document applies to meters indicating volume at base conditions, which are installed in locations with vibration and shocks of low significance. It applies to meters in: - closed locations (indoor or outdoor with protection, as specified in the instruction manual) with condensing humidity or with non-condensing humidity; or, if specified in the marking: - open locations (outdoor without any covering) both with condensing humidity or with non-condensing humidity; and in locations with electromagnetic disturbances likely to be found in residential, commercial and light industrial use. For meters which indicate unconverted volume, reference can be made to Annex C. Unless otherwise stated, all pressures given in this document are gauge pressures. Requirements for electronic indexes, valves and additional requirements for batteries incorporated in the meter and any other additional functionalities are given in EN 16314:2013. Unless otherwise stated in a particular test, the tests are carried out on meters that include additional functionality devices, as indicated in the instruction manual. Clauses 1 to 13 are for design and type testing only. For meters designed for blended gas and/or hydrogen measurement, refer to Annex E. This document refers only to hydrogen as specified in ISO 14687:2025 with a purity of type I grade A or better. Unless otherwise stated, all tests applicable to 2nd and 3rd family gases are applicable also to blended gas and hydrogen. Mixtures with a hydrogen concentration above 20 % and below 98 % by volume are not covered by this document.

prEN ISO 24577 Public enquiry
Comment end date 2026-07-05
Hydrometry – Use of noncontact methods for measuring water surface velocity and determining discharge (ISO/DIS 24577:2026)

Scope of the proposed deliverable To determine liquid flow, the following steps are necessary: 1) Measure water surface (or near surface) velocity with techniques using radar, laser or video images; 2) Adjust wind effects to the water surface velocity; 3) Translate the adjusted velocity to an averaged velocity by applying the velocity index or numerical computation; 4) Determine the area of the wetted cross section from the stage area relationship; and 5) Obtain water discharge by multiplying the averaged velocity by the wetted cross sectional area. This procedure is applicable to different kinds of channel and river section. Applications include: •Rivers and streams; •Artificial channels such as drainage ditches and irrigation channels; •Wastewater flows discharging to sewer or the environment through channels or partially filled pipes; •In sewer measurements; •Process flows on wastewater treatment plants. For any individual site the method to measure water surface velocity should be selected appropriately, based on the site conditions, nature of the application and uncertainty required. Take a special note that non-contact methods should NOT be used where a tidal phenomenon is present.

Quick filters

Technical Committee
TK 1 Electronics (8) TK 4 Information technology (8) TK 5 Electrical engineering (40) TK 6 Fruit and vegetables products (2) TK 12 Motor - roads (5) TK 13 Agricultural engineering (7) TK 18 Telecommunications (13) TK 20 Toys, child use articles, sports and other recreational equipment (2) TK 22 Fire safety (5) TK 23 Ceramic tiles, masonry and natural stones (3) TK 24 Quality management and quality assurance (2) TK 28 Gas systems (3) TK 29 Water supply (2) TK 32 Health (13) TK 34 Metrology (2) TK 35 Safety of machinery (3) TK 36 Environmental protection (4) TK 38 Building constructions (27) TK 39 Protection (1) TK 41 Welding (6) TK 42 Packaging (2) TK 43 Railway traffic (2) TK 45 Electric power (11) TK 46 Roofs and building waterproof isolation (1) TK 47 Information and documentation (2) TK 49 Metallic materials (3) TK 50 Heating and Ventilation Systems (1) TK 51 Food analysis- Horizontal methods (2) TK 52 Ophthalmic optics and lasers (4) TK 54 Assistive products for persons with disability (2) TK 57 Fertilizers (1) TK 59 Geotechnics (1) TK 60 Windows and doors (2) TK 63 Gas cylinders and cryogenic vessels (3) TK 65 Tourism services (1) TK 66 Non-destructive testing (1) TK 68 Plastics (7) TK 70 Pulp, paper, board, adhesives (4) TK 71 Sustainably produced biomass for energy application, solid biofuel and solid recovered fuel (1) TK 76 Explosive atmospheres (2) TK 77 Lifts (1) TK 79 IT security techniques (10) TK 80 Road transport and traffic telematics (2) TK 82 Safety of trackless overground vehicles (3) TK 86 Geographic information (1) TK 87 Biotechnology (1) TK 88 Building Information Modelling (BIM) (1) TK 89 Risk management and organizational governance (2) TK 91 Asset management and technical maintenance (1) TK 99 Health Informatics (2)
ICS
Biologinės dirvožemio savybės (1) Plonasis popierius (1) Advanced ceramics (4) Aircraft and space vehicles in general (2) Alarm and warning systems (1) Aluminium products (1) Application of information technology in general (3) Binders. Sealing materials (4) Biological evaluation of medical devices (1) Biology. Botany. Zoology (1) Bolts, screws, studs (1) Bridge construction (1) Building accessories (2) Cans. Tins. Tubes (2) Cement. Gypsum. Lime. Mortar (4) Chemical laboratories. Laboratory equipment (1) Cleaning appliances (1) Coatings and related processes used in aerospace industry (2) Company organization and management in general (2) Concrete and concrete products (1) Concrete structures (2) Cooking ranges, working tables, ovens and similar appliances (14) Dental instruments (1) Dental materials (3) Dishwashers (3) Domestic electrical appliances in general (3) Domestic refrigerating appliances (2) Domestic safety (4) Earth-moving machinery (1) Earthworks. Excavations. Foundation construction. Underground works (2) Electric heaters (2) Electric tools (1) Electric traction equipment (1) Electrical accessories in general (1) Electrical and electronic equipment (2) Electrical apparatus for explosive atmospheres (2) Electricity supply systems (1) Electronics (Vocabularies) (2) Emission (1) Environmental economics. Sustainability (1) Environmental impact assessment (1) Environmental testing (3) Equipment for children (2) Equipment for storage, preparation and distribution of fertilizers (1) Ergonomics (1) Exploratory, drilling and extraction equipment (1) Explosives. Pyrotechnics and fireworks (1) Fibres and cables (2) Fire protection (3) Fire-resistance of building materials and elements (1) First aid (3) Fissile materials and nuclear fuel technology (4) Fixed capacitors (1) Flat steel products and semi-products (2) Flow in open channels (1) Gas cylinders (3) Gas supply systems (1) Generators (1) Health care services in general (1) Heat pumps (1) High voltage switchgear and controlgear (1) Hospital equipment (1) Identification cards. Chip cards. Biometrics (1) Immunity (2) Implants for surgery, prosthetics and orthotics (1) In vitro diagnostic test systems (3) Indoor sports equipment (1) Industrial robots. Manipulators (1) Industrial trucks (1) Insulating materials in general (3) Iron and steel forgings (1) IT applications in education (1) IT applications in health care technology (2) IT applications in office work (1) IT applications in science (1) IT applications in transport (2) IT Security (12) Lamps in general (1) Leather and furs (1) Lifts. Escalators (1) Management of human resources (1) Management systems (2) Masonry (1) Measurement of electrical and magnetic quantities (5) Mechanical testing of metals (2) Medical equipment in general (1) Metallic coatings (1) Natural gas (2) Non-destructive testing (1) Nuclear power plants. Safety (1) Nuts (4) Oilseeds (1) Open systems interconnection in general (1) Optoelectronics. Laser equipment (2) Other lifting equipment (1) Other medical equipment (1) Other semiconductor devices (1) Other services (1) Other standards related to aids for disabled and handicapped people (1) Paint coating equipment (1) Paper and board (3) Passenger and cabin equipmen (1) Passenger cars. Caravans and light trailers (1) Petroleum products and natural gas handling equipment (1) Pipeline components and pipelines in general (1) Plastics in general (1) Plug-and-socket devices. Connectors (2) Pneumatic tools (1) Pollution, pollution control and conservation (1) Postal services (1) Potentiometers, variable resistors (1) Power transmission and distribution lines (1) Pressure regulators (1) Properties of surfaces (1) Protection against dangerous goods (1) Protection against falling and slipping (1) Quantities and units (1) Radiation measurements (1) Radiation protection (1) Radiographic equipment (1) Railway rolling stock in general (2) Road construction materials (1) Rotating machinery in general (1) Seismic and vibration protection (1) Services in general (1) Small kitchen appliances (6) Solar energy engineering (1) Solid fuels (1) Spices and condiments (2) Stationary source emissions (1) Steel pipes and tubes for specific use (1) Sterilization and disinfection in general (1) Street lighting and related equipment (2) Surface treatment and coating in general (1) Surgical instruments and materials (1) Technical aspects (17) TELECOMMUNICATIONS. AUDIO AND VIDEO ENGINEERING (13) Telecontrol. Telemetering (5) Therapy equipment (1) Thermoplastic materials (4) Timber structures (1) Transport by rail (1) Valves in general (2) Ventilation and air-conditioning systems (1) Ventilators. Fans. Air-conditioners (1) Walls. Partitions. Façades (1) Water heating equipment (1) Waxes, bituminous materials and other petroleum products (2) Welded joints and welds (3) Welding, brazing and soldering in general (1) Woodworking machines (3) Writing and transliteration (2)