GDPR

projektai-lsd Lithuanian Standards Board
Portal for draft standards

Extended search

till

Results

Showing:
Total records found: 28
1 2 arrow-next
EN IEC 55011:2025/prAA:2026 Public enquiry
Comment end date 2026-07-22
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement

This document applies to industrial, scientific and medical electrical equipment operating in the frequency range 0 Hz to 400 GHz and to domestic and similar appliances designed to generate and/or use locally radio-frequency energy. This document covers emission requirements related to radio-frequency (RF) disturbances in the frequency range of 9 kHz to 400 GHz. For ISM RF applications in the meaning of the definition found in the ITU Radio Regulations (2020) (see Definition 3.1.18), this document covers emission requirements related to radio- frequency disturbances in the frequency range of 9 kHz to 18 GHz. ISM equipment which incorporates radio transmit/receive functions ( host equipment with radio functionality) is included in the scope of this document, see Annex F. However, the emission requirements in this document are not intended to be applicable to the intentional transmissions from a radio transmitter as defined by the ITU including their spurious emissions. NOTE 1 This exclusion only applies to emissions from the intentional radio transmitter. However, combination emissions, for example emissions resulting from intermodulation between the radio and the non -radio subassemblies of the ISM equipment, are not subject to this exclusion. NOTE 2 Emission requirements for induction cooking appliances are specified in CISPR 14 -1 [1]1. Requirements for ISM RF lighting equipment and UV irradiators operating at frequencies within the ISM frequency bands defined by the ITU Radio Regulations are contained in this document. Robots used for industrial, scientific and medical applications are in the scope of this document. EXAMPLE Welding robots, spraying robots, handling robots, processing robots, assembly robots, medical robots, education and experimental robots. A comprehensive list of robots in the scope of this document is given on the IEC EMC zone. NOTE 3 Flying robots, domestic helper robots, toy robots and entertainment robots are examples of robots in the scope of other CISPR standards. Equipment covered by other CISPR product and product family emission standards are excluded from the scope of this document.

prEN 319 412-2 V2.5.0 (2026-05) Public enquiry
Comment end date 2026-07-20
Electronic Signatures and Trust Infrastructures (ESI); Certificate Profiles; Part 2: Certificate profile for certificates issued to natural persons
EN IEC 55014-2:2021/prAA:2026 Public enquiry
Comment end date 2026-07-10
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard
prEN IEC 61326-2-7:2026 Public enquiry
Comment end date 2026-07-01
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-7: Particular requirements - Test configurations, operational conditions, test levels and performance criteria for devices with Ethernet-APL interfaces

In addition to the requirements of IEC 61326-1, this part of IEC 61326 specifies the EMC test requirements for process automation equipment using at least one Ethernet-APL (Ethernet ADVANCED PHYSICAL LAYER) compliant port according IEC TS 63444. The type of equipment covered by this document includes INFRASTRUCTURE DEVICES such as switches as well as measurement and control devices. This document provides requirements for the EMC test setups of the APL interface for devices intended for use in process control and process measurement. The other functions of the equipment remain covered by other parts of the IEC 61326 series. NOTE Ethernet-APL uses IEEE Std. 802.3-2022 Ethernet Physical Layer 10BASE-T1L, suitable to be used for full- duplex communication over a single balanced pair of conductors. The test levels are based on the intended environment as stated in the product’s specification or user documentation and selected appropriately from IEC 61326-1.

EN 60870-5-6:2009/prA1:2026 Public enquiry
Comment end date 2026-07-01
Amendment 1 - Telecontrol equipment and systems - Part 5-6: Guidelines for conformance testing for the IEC 60870-5 companion standards
EN 60870-5-103:1998/prA1:2026 Public enquiry
Comment end date 2026-07-01
Amendment 1 - Telecontrol equipment and systems - Part 5-103: Transmission protocols - Companion standard for the informative interface of protection equipment
EN 60870-5-104:2006/prA2:2026 Public enquiry
Comment end date 2026-07-01
Amendment 2 - Telecontrol equipment and systems - Part 5-104: Transmission protocols - Network access for IEC 60870-5-101 using standard transport profiles
EN 60870-5-101:2003/prA2:2026 Public enquiry
Comment end date 2026-07-01
Amendment 2 - Telecontrol equipment and systems - Part 5-101: Transmission protocols - Companion standard for basic telecontrol tasks
EN 60870-5-2:1993/prA1:2026 Public enquiry
Comment end date 2026-07-01
Amendment 1 - Telecontrol equipment and systems - Part 5-2: Transmission protocols - Link transmission procedures
prEN 300 338-6 V1.4.0 (2026-04) Public enquiry
Comment end date 2026-06-29
Technical characteristics and methods of measurement for equipment for generation, transmission and reception of Digital Selective Calling (DSC) in the maritime MF, MF/HF and/or VHF mobile service; Part 6: Class M DSC
prEN 300 338-2 V1.6.0 (2026-04) Public enquiry
Comment end date 2026-06-29
Technical characteristics and methods of measurement for equipment for generation, transmission and reception of Digital Selective Calling (DSC) in the maritime MF, MF/HF and/or VHF mobile service; Part 2: Class A DSC
prEN 300 338-5 V1.4.0 (2026-04) Public enquiry
Comment end date 2026-06-29
Technical characteristics and methods of measurement for equipment for generation, transmission and reception of Digital Selective Calling (DSC) in the maritime MF, MF/HF and/or VHF mobile service; Part 5: Handheld VHF Class H DSC
prEN 300 338-1 V1.7.0 (2026-04) Public enquiry
Comment end date 2026-06-29
Technical characteristics and methods of measurement for equipment for generation, transmission and reception of Digital Selective Calling (DSC) in the maritime MF, MF/HF and/or VHF mobile service; Part 1: Common requirements
prEN 300 338-4 V1.3.0 (2026-04) Public enquiry
Comment end date 2026-06-29
Technical characteristics and methods of measurement for equipment for generation, transmission and reception of Digital Selective Calling (DSC) in the maritime MF, MF/HF and/or VHF mobile service; Part 4: Class E DSC
prEN 300 338-8 V1.2.0 (2026-04) Public enquiry
Comment end date 2026-06-29
Technical characteristics and methods of measurement for equipment for generation, transmission and reception of Digital Selective Calling (DSC) in the maritime MF, MF/HF and/or VHF mobile service; Part 8: Enabling DSC radio equipment with remote control capabilities
prEN 300 338-3 V1.4.0 (2026-04) Public enquiry
Comment end date 2026-06-29
Technical characteristics and methods of measurement for equipment for generation, transmission and reception of Digital Selective Calling (DSC) in the maritime MF, MF/HF and/or VHF mobile service; Part 3: Class D DSC
prEN 300 338-7 V1.2.0 (2026-04) Public enquiry
Comment end date 2026-06-29
Technical characteristics and methods of measurement for equipment for generation, transmission and reception of Digital Selective Calling (DSC) in the maritime MF, MF/HF and/or VHF mobile service; Part 7: Implementation of Bridge Alert Management (BAM) in DSC radio equipment
prEN IEC 60794-1-108:2026 Public enquiry
Comment end date 2026-06-17
Optical fibre cables - Part 1-108: Generic specification - Basic optical cable test procedures - Mechanical tests methods - Flexing, method E8
prEN IEC 60794-1-113:2026 Public enquiry
Comment end date 2026-06-17
Optical fibre cables - Part 1-113: Generic specification - Basic optical cable test procedures - Mechanical tests methods - Shotgun resistance, Method E13
prEN 300 392-3-15 V1.5.0 (2026-04) Public enquiry
Comment end date 2026-06-21
Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 3: Interworking at the Inter-System Interface (ISI); Sub-part 15: Transport layer independent Additional Network Feature, Mobility Management (ANF-ISIMM)
prEN 300 392-12-16 V1.4.0 (2026-03) Public enquiry
Comment end date 2026-06-21
Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 12: Supplementary services stage 3; Sub-part 16: Pre-emptive Priority Call (PPC)
prEN 319 412-3 V1.4.0 (2026-04) Public enquiry
Comment end date 2026-06-21
Electronic Signatures and Trust Infrastructures (ESI); Certificate Profiles; Part 3: Certificate profile for certificates issued to legal persons
prEN 300 392-3-12 V1.4.0 (2026-03) Public enquiry
Comment end date 2026-06-08
Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 3: Interworking at the Inter-System Interface (ISI); Sub-part 12: Transport layer independent Additional Network Feature Individual Call (ANF-ISIIC)
prEN 300 392-3-9 V1.4.0 (2026-03) Public enquiry
Comment end date 2026-06-08
Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 3: Interworking at the Inter-System Interface (ISI); Sub-part 9: Transport layer independent, General design
prEN 300 392-12-22 V1.7.0 (2026-03) Public enquiry
Comment end date 2026-06-08
Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 12: Supplementary services stage 3; Sub-part 22: Dynamic Group Number Assignment (DGNA)
Total records found: 28
1 2 arrow-next

Quick filters

Technical Committee
TK 1 Electronics (4) TK 4 Information technology (4) TK 5 Electrical engineering (25) TK 8 Electromagnetic compatibility (3) TK 12 Motor - roads (4) TK 13 Agricultural engineering (9) TK 18 Telecommunications (16) TK 20 Toys, child use articles, sports and other recreational equipment (2) TK 21 Textiles and personal protective equipment (2) TK 22 Fire safety (4) TK 23 Ceramic tiles, masonry and natural stones (2) TK 28 Gas systems (4) TK 29 Water supply (3) TK 32 Health (14) TK 34 Metrology (2) TK 35 Safety of machinery (2) TK 36 Environmental protection (8) TK 38 Building constructions (26) TK 40 Petroleuml, petroleum products, lubricants and alternative fuels (1) TK 41 Welding (4) TK 42 Packaging (3) TK 43 Railway traffic (4) TK 45 Electric power (15) TK 47 Information and documentation (3) TK 49 Metallic materials (5) TK 50 Heating and Ventilation Systems (1) TK 51 Food analysis- Horizontal methods (1) TK 52 Ophthalmic optics and lasers (2) TK 54 Assistive products for persons with disability (1) TK 57 Fertilizers (2) TK 59 Geotechnics (2) TK 60 Windows and doors (2) TK 63 Gas cylinders and cryogenic vessels (3) TK 65 Tourism services (1) TK 66 Non-destructive testing (1) TK 68 Plastics (4) TK 70 Pulp, paper, board, adhesives (3) TK 71 Sustainably produced biomass for energy application, solid biofuel and solid recovered fuel (1) TK 76 Explosive atmospheres (2) TK 77 Lifts (1) TK 79 IT security techniques (5) TK 82 Safety of trackless overground vehicles (2) TK 84 Chimneys and solid fuel burning appliances (2) TK 86 Geographic information (1) TK 88 Building Information Modelling (BIM) (3) TK 89 Risk management and organizational governance (2) TK 91 Asset management and technical maintenance (1) TK 99 Health Informatics (3)
ICS
Biologinės dirvožemio savybės (1) Fizikinės dirvožemio savybės (1) Agricultural machines and equipment in general (1) Agricultural tractors and trailed vehicles (1) Aircraft and space vehicles in general (2) Alkaline secondary cells and batteries (1) Aluminium products (2) Aluminium structures (3) Application of information technology in general (2) Automatic controls for household use (2) Binders. Sealing materials (4) Bolts, screws, studs (5) Bridge construction (1) Building accessories (2) Cans. Tins. Tubes (2) Cement. Gypsum. Lime. Mortar (3) Check valves (1) Chemical laboratories. Laboratory equipment (1) Chimneys, shafts, ducts (1) Civil engineering in general (1) Cleaning appliances (2) Coatings and related processes used in aerospace industry (2) Company organization and management in general (1) Concrete and concrete products (1) Connecting devices (1) Construction industry in general (1) Cooking ranges, working tables, ovens and similar appliances (2) Cookware, cutlery and flatware (1) Corrosion of metals (1) Dental equipment (1) Dental instruments (1) Dental materials (1) Dentistry in general (1) Dishwashers (2) Domestic refrigerating appliances (2) Domestic safety (11) Earth-moving machinery (1) Earthworks. Excavations. Foundation construction. Underground works (1) Electric heaters (2) Electrical and electronic equipment (1) Electrical and electronic testing (1) Electrical apparatus for explosive atmospheres (2) Electrical insulation in general (1) Electronics (Vocabularies) (2) Emission (1) Environmental economics. Sustainability (1) Environmental impact assessment (1) Environmental testing (2) Equipment for children (2) Equipment for storage, preparation and distribution of fertilizers (1) Ergonomics (1) Examination of physical properties of water (1) Exploratory, drilling and extraction equipment (1) Explosives. Pyrotechnics and fireworks (1) Extraction and processing of petroleum and natural gas (2) Fasteners in general (1) Fertilizers (1) Fibre optic interconnecting devices (2) Fibres and cables (2) Fire protection (2) Fire-resistance of building materials and elements (1) Fissile materials and nuclear fuel technology (4) Floor coverings (2) Flow in open channels (1) Gas cylinders (2) Gas supply systems (1) General methods of tests and analysis for food products (2) General purpose pallets (1) Governance and ethics (1) Harvesting equipment (1) Heat pumps (1) Immunity (2) In vitro diagnostic test systems (2) Indoor sports equipment (1) Industrial process measurement and control (1) Industrial robots. Manipulators (1) Industrial trucks (1) Information technology (IT) in general (1) Installations and equipment for waste disposal and treatment (1) Insulating materials in general (1) Iron and steel forgings (1) Iron and steel products in general (1) IT applications in health care technology (3) IT applications in science (1) IT applications in transport (2) IT Security (5) Laboratory medicine in general (1) Lamps in general (2) Laundry appliances (1) Leather and furs (2) Lifts. Escalators (1) Liquid fuels (1) Luminaires (1) Management of human resources (1) Masonry (1) Materials and components for railway engineering (1) Measurement of electrical and magnetic quantities (1) Measurement of volume, mass, density, viscosity (1) Mechanical structures for electronic equipment (2) Mechanical testing of metals (2) Metallic coatings (1) Metallurgy (Vocabularies) (1) Microbiology of water (1) Natural gas (1) Navigation and control equipment (1) Noise emitted by machines and equipment (1) Non-destructive testing (1) Nuclear power plants. Safety (1) Nuts (6) Other equipment related to power transmission and distribution networks (1) Other products of the chemical industry (1) Other semiconductor devices (1) Other standards related to aids for disabled and handicapped people (1) Paints and varnishes (1) Paper and board (3) Passenger and cabin equipmen (2) Petroleum products and natural gas handling equipment (2) Pipeline components and pipelines in general (1) Pipelines and its parts for external sewage systems (1) Plastics in general (2) Plastics pipes and fittings for non fluid use (1) Pneumatic tools (1) Pollution, pollution control and conservation (2) Postal services (1) Power transmission and distribution lines (3) Products of the chemical industry (1) Protection against dangerous goods (1) Quantities and units (1) Radiation measurements (2) Railway rolling stock in general (3) Raw skins, hides and pelts (1) Recycling (1) Rotating machinery in general (1) Seismic and vibration protection (1) Services in general (1) Solar energy engineering (1) Solid fuel heaters (1) Solid fuels (1) Stationary source emissions (1) Steel pipes and tubes for specific use (2) Steel structures (1) Sterilization and disinfection in general (1) Surface treatment and coating in general (1) Technical aspects (16) TELECOMMUNICATIONS. AUDIO AND VIDEO ENGINEERING (16) Telecontrol. Telemetering (5) Therapy equipment (1) Timber structures (1) Trailing stock (1) Transport by rail (1) Walls. Partitions. Façades (1) Water heating equipment (2) Waxes, bituminous materials and other petroleum products (1) Welded joints and welds (2) Welding equipment (1) Woodworking machines (2) Workplace atmospheres (1) Writing and transliteration (3)