GDPR

projektai-lsd Lithuanian Standards Board
Portal for draft standards

Extended search

till

Results

Showing:
prEN ISO 18119 Public enquiry
Comment end date 2026-06-11
Gas cylinders - Seamless steel and seamless aluminium-alloy gas cylinders and tubes - Periodic inspection and testing (ISO/DIS 18119:2026)

This document specifies the requirements for periodic inspection and testing to verify the integrity of cylinders and tubes to be re-introduced into service for a further period of time. This document is applicable to seamless steel and seamless aluminium-alloy transportable gas cylinders (single or those that comprise a bundle) intended for compressed and liquefied gases under pressure, of water capacity from 0,5 l up to 150 l and to seamless steel and seamless aluminium-alloy transportable gas tubes (single or those that comprise a bundle) intended for compressed and liquefied gases under pressure, of water capacity greater than 150 l. It also applies, as far as practical, to cylinders of less than 0,5 l water capacity. This document does not apply to the periodic inspection and maintenance of acetylene cylinders or to the periodic inspection and testing of composite cylinders. NOTE Unless noted by exception, the use of the word "cylinder" in this document refers to both cylinders and tubes.

EN 12245:2022/prA1 Public enquiry
Comment end date 2026-06-04
Transportable gas cylinders - Fully wrapped composite cylinders

This document specifies minimum requirements for the materials, design, construction, prototype testing and routine manufacturing inspections of fully wrapped composite gas cylinders for compressed, liquefied and dissolved gases. NOTE 1 For the purposes of this document, the word “cylinder” includes tubes (seamless transportable pressure receptacles of a water capacity exceeding 150 l and of not more than 3 000 l). This document is applicable to cylinders that comprise a liner of metallic material (welded or seamless) or non-metallic material (or a mixture thereof), reinforced by a wound composite consisting of fibres of glass, carbon or aramid (or a mixture thereof) embedded in a matrix. This document is also applicable to composite cylinders without liners. This document is not applicable to gas cylinders which are partially covered with fibres and commonly called “hoop wrapped” cylinders. For hoop wrapped composite cylinders, see EN 12257. NOTE 2 This document does not address the design, fitting and performance of removable protective sleeves. Where these are fitted, they are considered separately. This document is primarily for compressed, liquefied and dissolved gases other than LPG. NOTE 3 For dedicated LPG cylinders, see EN 14427.

Quick filters

Technical Committee
TK 1 Electronics (5) TK 4 Information technology (4) TK 5 Electrical engineering (25) TK 8 Electromagnetic compatibility (3) TK 12 Motor - roads (4) TK 13 Agricultural engineering (9) TK 18 Telecommunications (16) TK 19 Concrete and reinforced concrete (1) TK 20 Toys, child use articles, sports and other recreational equipment (2) TK 21 Textiles and personal protective equipment (2) TK 22 Fire safety (4) TK 28 Gas systems (4) TK 29 Water supply (3) TK 32 Health (13) TK 34 Metrology (2) TK 35 Safety of machinery (2) TK 36 Environmental protection (7) TK 38 Building constructions (26) TK 40 Petroleuml, petroleum products, lubricants and alternative fuels (1) TK 41 Welding (3) TK 42 Packaging (3) TK 43 Railway traffic (4) TK 45 Electric power (15) TK 47 Information and documentation (3) TK 49 Metallic materials (6) TK 50 Heating and Ventilation Systems (1) TK 51 Food analysis- Horizontal methods (1) TK 54 Assistive products for persons with disability (1) TK 57 Fertilizers (2) TK 59 Geotechnics (2) TK 60 Windows and doors (2) TK 63 Gas cylinders and cryogenic vessels (3) TK 65 Tourism services (1) TK 66 Non-destructive testing (1) TK 68 Plastics (3) TK 70 Pulp, paper, board, adhesives (1) TK 71 Sustainably produced biomass for energy application, solid biofuel and solid recovered fuel (1) TK 76 Explosive atmospheres (2) TK 77 Lifts (1) TK 79 IT security techniques (2) TK 82 Safety of trackless overground vehicles (2) TK 84 Chimneys and solid fuel burning appliances (2) TK 86 Geographic information (1) TK 88 Building Information Modelling (BIM) (2) TK 89 Risk management and organizational governance (2) TK 91 Asset management and technical maintenance (1) TK 99 Health Informatics (3)
ICS
Fizikinės dirvožemio savybės (1) Biologinės dirvožemio savybės (1) Agricultural machines and equipment in general (1) Agricultural tractors and trailed vehicles (1) Aircraft and space vehicles in general (2) Alkaline secondary cells and batteries (1) Aluminium products (3) Aluminium structures (3) Application of information technology in general (2) Automatic controls for household use (2) Binders. Sealing materials (4) Bolts, screws, studs (5) Bridge construction (1) Building accessories (2) Cans. Tins. Tubes (2) Cement. Gypsum. Lime. Mortar (1) Check valves (1) Chemical laboratories. Laboratory equipment (2) Chimneys, shafts, ducts (1) Civil engineering in general (1) Cleaning appliances (2) Coatings and related processes used in aerospace industry (2) Company organization and management in general (1) Concrete and concrete products (2) Connecting devices (1) Construction industry in general (1) Cooking ranges, working tables, ovens and similar appliances (2) Cookware, cutlery and flatware (1) Corrosion of metals (1) Dental equipment (1) Dental instruments (1) Dental materials (1) Dentistry in general (1) Dishwashers (2) Domestic refrigerating appliances (2) Domestic safety (11) Earth-moving machinery (1) Earthworks. Excavations. Foundation construction. Underground works (1) Electric heaters (2) Electrical and electronic equipment (1) Electrical and electronic testing (1) Electrical apparatus for explosive atmospheres (2) Electrical insulation in general (1) Emission (1) Environmental economics. Sustainability (1) Environmental impact assessment (1) Environmental testing (2) Equipment for children (2) Equipment for storage, preparation and distribution of fertilizers (1) Ergonomics (1) Examination of physical properties of water (1) Exploratory, drilling and extraction equipment (1) Explosives. Pyrotechnics and fireworks (1) Extraction and processing of petroleum and natural gas (2) Fasteners in general (1) Fertilizers (1) Fibre optic interconnecting devices (2) Fibres and cables (2) Fire protection (2) Fire-resistance of building materials and elements (1) Fissile materials and nuclear fuel technology (4) Floor coverings (2) Flow in open channels (1) Gas cylinders (2) Gas supply systems (1) General methods of tests and analysis for food products (2) General purpose pallets (1) Governance and ethics (1) Harvesting equipment (1) Heat pumps (1) Immunity (2) In vitro diagnostic test systems (2) Indoor sports equipment (1) Industrial process measurement and control (1) Industrial robots. Manipulators (1) Industrial trucks (1) Information technology (IT) in general (1) Installations and equipment for waste disposal and treatment (1) Insulating materials in general (1) Iron and steel forgings (1) Iron and steel products in general (1) IT applications in health care technology (3) IT applications in science (1) IT applications in transport (2) IT Security (4) Laboratory medicine in general (1) Lamps in general (2) Laundry appliances (1) Leather and furs (2) Lifts. Escalators (1) Liquid fuels (1) Luminaires (1) Management of human resources (1) Masonry (1) Materials and components for railway engineering (1) Measurement of electrical and magnetic quantities (1) Measurement of volume, mass, density, viscosity (1) Mechanical structures for electronic equipment (2) Mechanical testing of metals (2) Metallurgy (Vocabularies) (1) Microbiology of water (1) Natural gas (1) Navigation and control equipment (1) Noise emitted by machines and equipment (1) Non-destructive testing (1) Nuclear power plants. Safety (1) Nuts (6) Other equipment related to power transmission and distribution networks (1) Other products of the chemical industry (1) Other semiconductor devices (1) Other standards related to aids for disabled and handicapped people (1) Paints and varnishes (1) Paper and board (1) Passenger and cabin equipmen (2) Petroleum products and natural gas handling equipment (2) Pipeline components and pipelines in general (1) Pipelines and its parts for external sewage systems (1) Plastics in general (1) Plastics pipes and fittings for non fluid use (1) Pneumatic tools (1) Pollution, pollution control and conservation (2) Postal services (1) Power transmission and distribution lines (3) Products of the chemical industry (1) Protection against dangerous goods (1) Quantities and units (1) Radiation measurements (2) Railway rolling stock in general (3) Raw skins, hides and pelts (1) Recycling (1) Rotating machinery in general (1) Seismic and vibration protection (1) Services in general (1) Solar energy engineering (1) Solid fuel heaters (1) Solid fuels (1) Steel pipes and tubes for specific use (2) Steel structures (1) Surface treatment and coating in general (1) Technical aspects (16) TELECOMMUNICATIONS. AUDIO AND VIDEO ENGINEERING (16) Telecontrol. Telemetering (5) Therapy equipment (1) Thermistors (1) Timber structures (1) Trailing stock (1) Transport by rail (1) Walls. Partitions. Façades (1) Water heating equipment (2) Waxes, bituminous materials and other petroleum products (1) Welded joints and welds (2) Welding equipment (1) Woodworking machines (2) Workplace atmospheres (1) Writing and transliteration (3)