List of drafts

Search keyword

Extended search

Reference

Directives

Organisation

ICS

Technical Committee

Foreign TC'S

Working group

Stage

Status

Comment date

till

Results

prEN 16755 Public enquiry

Comment end date 2025-07-01

Classes of fire-retardant treated wood products in interior and exterior end use applications - Reaction to fire performance

This document describes test methods and methods for classification of wood and wood-based products for which a stage in the production process results in an improvement of the reaction-to-fire classification in accordance with EN 13501-1 for use in interior and exterior situations (use classes 1, 2, and 3 as defined in EN 335:2013). NOTE The classes of this document are not performance classes and do not give guidance for how long the reaction to fire classification of wood or wood-based product will last. This document applies to - wood and wood-based products (specific wood species, wood treated with preservatives and modified wood, for example thermally and chemically modified wood) that have been treated with fire-retardant chemical(s) applied either by a penetrating process or by a superficial process, such as with a film forming fire-retardant coating. - wood-based products that incorporate fire retardant chemical(s) as part of the production process. This document also covers fire-retardant wood and wood-based products that have a non-fire-retardant coating. Mechanical properties, aesthetic properties, dimensional stability properties, service life and biological durability of fire-retardant wood and wood-based products are not covered by this document. NOTE 2 This document is relevant for, but not limited to, products covered by these products standards: EN 13986, EN 14081-1, EN14374, EN 14915 and EN 16351. NOTE 3 EAD 350865-00-1106 covers fire retardant products (coating) applied in situ.

Read draft and comment View

prEN 14951 Public enquiry

Comment end date 2025-06-26

Solid hardwood panelling and cladding - Machined profiles

This document specifies characteristics of solid wood panelling and cladding with or without tongue and groove machined from hardwoods (wood of trees of the botanical group dicotyledons). Products are intended for interior or exterior use. This document covers treated, untreated and surface treated products, including those made of thermally and chemically modified wood, as well as finger jointed products. This document does not cover processes for treatment, surface coating or modification. NOTE Where further regulatory provisions (e.g. durability, reaction to fire, dangerous substances and generally CE-marking according to CPR) are required, EN 14915 applies.

Read draft and comment View

prEN 15146 Public enquiry

Comment end date 2025-06-26

Solid softwood panelling and cladding - Machined profiles without tongue and groove

This document specifies characteristics of solid wood panelling and cladding without tongue and groove machined from softwoods (wood of trees of the botanical group gymnosperms). Products are intended for interior or exterior use. This document covers treated, untreated and surface treated products, including those made of thermally and chemically modified wood, as well as finger jointed products. This document does not cover processes for treatment, surface coating or modification. NOTE Where further regulatory provisions (e.g. durability, reaction to fire, dangerous substances and generally CE-marking according to CPR) are required, EN 14915 applies.

Read draft and comment View

prEN 14519 Public enquiry

Comment end date 2025-06-26

Solid softwood panelling and cladding - Machined profiles with tongue and groove

This document specifies characteristics of solid wood panelling and cladding with tongue and groove machined from softwoods (wood of trees of the botanical group gymnosperms). Products are intended for interior or exterior use. This document covers treated, untreated and surface treated products, including those made of thermally and chemically modified wood, as well as finger jointed products. This document does not cover processes for treatment, surface coating or modification. NOTE Where further regulatory provisions (e.g. durability, reaction to fire, dangerous substances and generally CE-marking according to CPR) are required, EN 14915 applies.

Read draft and comment View

prEN 212 Public enquiry

Comment end date 2025-06-26

Wood preservatives - General guidance on sampling and preparation for analysis of wood preservatives and treated timber

This document gives guidance on the general procedures to be followed in the sampling and preparation for analysis of wood preservatives and preservative-treated timber. This document is applicable to the provision of appropriate samples for analysis which can be used to check the content of active and other ingredients in preservative formulations, and the content of active and other ingredients of wood preservatives in treated timber, either before, during or after the service life of the timber. NOTE 1 Methods of sampling creosote and creosote-treated timber are described in EN 1014-1, EN 1014-2 and EN 12490. These are used in preference to the recommendations in this document. NOTE 2 No attempt has been made in this document to lay down detailed procedures to be adopted for control purposes at manufacturing plants where large volumes of preservatives are sampled. Nor does it attempt to establish procedures for checking the compliance of batches of treated timber with specifications demanding a defined level of treatment (see 6.2).

Read draft and comment View

Mandatory cookies

Statistics cookies

Newsletter subscription

Extended search

Results

Quick filters

Organisation

Technical Committee

ICS