GDPR

projektai-lsd Lithuanian Standards Board
Portal for draft standards

Extended search

till

Results

Showing:
EN 13001-2:2021/prA1 Public enquiry
Comment end date 2025-12-02
Crane safety - General design - Part 2: Load actions

This document specifies load actions and load combinations for the calculation of load effects as basis for the proof of competence of a crane and its main components. It will be used together with the other generic parts of the EN 13001 series of standards, see Annex E. As such they specify conditions and requirements on design to prevent mechanical hazards of cranes and provide a method of verification of those requirements. NOTE Specific requirements for particular types of crane are given in the appropriate European product standards for the particular crane type, see Annex E. The following is a list of significant hazardous situations and hazardous events that could result in risks to persons during normal use and reasonably foreseeable misuse. Clause 4 of this document provides means to reduce or eliminate the risks of mechanical failures due to the following: a) rigid body instability of the crane or its parts (tilting); b) exceeding the limits of strength (yield, ultimate, fatigue); c) elastic instability of the crane or its parts or components (buckling, bulging). The hazards covered by this document are identified by Annex G. This document is not applicable to cranes that are manufactured before the date of its publication as EN.

prEN 16851 Public enquiry
Comment end date 2025-11-13
Cranes - Light crane systems

This document applies to: — light crane systems, either suspended or free-standing systems, where the rated capacity of any single hoist mechanism is 4 t or less; — pillar- and wall-mounted jib cranes, without an operator's cabin, whose rated capacity is 10 t or less and whose overturning load moment is 500 kNm or less. NOTE 1 For illustration of crane types, see Annex C. This document is not applicable to cranes covered by another product specific crane standard, e.g. EN 15011:2020 or EN 14985:2012, see Annex E. This document is applicable to cranes and crane systems, whose structures are made of steel or aluminium, excluding aluminium structures containing welded joints. This document gives requirements for all significant hazards, hazardous situations and events relevant to cranes, when used as intended, foreseeable misuse and under foreseen conditions (see Annex A). NOTE 2 Automated operation can be subject to additional requirements. Guidance is given in Annex F. The specific hazards due to potentially explosive atmospheres, ionizing radiation, operation in electro-magnetic fields beyond the range of EN IEC 61000-6-2:2019 and operation in pharmacy or food industry are not covered by this document. This document does not cover hazards related to the lifting of persons. This document is not applicable to cranes manufactured before the date of its publication.

Quick filters

ICS
Biologinės dirvožemio savybės (1) Kiti su dirvožemio kokybe susiję standartai (1) Additive manufacturing (1) Adhesives (2) Advanced ceramics (1) Aerospace electric equipment and systems (2) Agricultural tractors and trailed vehicles (1) Alarm and warning systems (1) Anaesthetic, respiratory and reanimation equipment (4) Automatic controls for household use (1) Biology. Botany. Zoology (1) Bottles. Pots. Jars (1) Buildings in general (1) Cables (1) Cement. Gypsum. Lime. Mortar (2) Cereals, pulses and derived products (3) Chemical laboratories. Laboratory equipment (1) Chimneys, shafts, ducts (1) Cleaning appliances (1) Company organization and management in general (1) Construction of railways (1) Cookware, cutlery and flatware (1) Cranes (2) Cycles (1) Diagnostic equipment (1) Diagnostic, maintenance and test equipment (1) Disinfectants and antiseptics (1) Domestic safety (3) Earthworks. Excavations. Foundation construction. Underground works (2) Electric road vehicles (1) Electrical and electronic equipment (1) Electrical and electronic testing (2) Electrical apparatus for explosive atmospheres (1) Electrical engineering in general (2) Electricity supply systems (1) Emission (1) Environmental economics. Sustainability (1) Exploratory, drilling and extraction equipment (1) Fasteners in general (1) Fertilizers (3) Fibres and cables (2) Fire protection (1) Fire-fighting (1) Fire-resistance of building materials and elements (1) First aid (1) Floor coverings (1) Fluid storage devices in general (2) Fluid systems and components for general use (Vocabularies) (1) Furniture (1) Fuses and other overcurrent protection devices (1) Gas heaters (2) Geotextiles (1) Head protective equipment (1) Hospital equipment (1) Industrial process measurement and control (2) Information technology (IT) in general (2) Iron and steel castings (1) IT applications in health care technology (1) IT applications in trade (1) IT Security (3) Items of art and handicrafts. Cultural property and heritage (1) Leg and foot protection (3) Leisure and tourism in general (1) Lifts. Escalators (1) Liquid fuels (1) Low voltage switchgear and controlgear (1) Luminaires (2) Management of human resources (1) Management systems (1) Mechanical structures for electronic equipment (1) Metallic coatings (1) On-board equipment and instruments (1) Other agricultural machines and equipment (1) Other cells and batteries (2) Other fibre optic equipment (1) Other medical equipment (1) Other pipeline components (2) Other semiconductor devices (4) Paints and varnishes (1) Paper and board (2) Petroleum products and natural gas handling equipment (1) Petroleum products in general (1) Physics. Chemistry (1) Piezoelectric devices (1) Pigments and extenders (2) Plastics and rubber insulating materials (1) Plastics in general (1) Power transmission and distribution networks in general (1) Printed circuits and boards (1) Processing equipment (2) Product and company certification. Conformity assessment (1) Product life-cycles (1) Protective clothing (1) Radiation measurements (2) Radiation protection (1) Railway rolling stock in general (2) Refractories (3) Road equipment and installations (1) Rotating machinery in general (1) Safety of machinery (1) Semiconductor devices in general (1) Small kitchen appliances (1) Solar energy engineering (3) Special wastes (1) Sports facilities (1) Standardization. General rules (1) Stationary containers and tanks (1) Superconductivity and conducting materials (1) Syringes, needles and catheters (2) Technical product documentation (1) TELECOMMUNICATIONS. AUDIO AND VIDEO ENGINEERING (3) Test conditions and procedures in general (1) Textile auxiliary materials (3) Textile fibres in general (1) Textiles in general (1) Thermal and sound insulating materials (1) Trailing stock (1) Valves in general (2) Volumetric equipment and measurements (1) Water supply systems (1)