GDPR

projektai-lsd Lithuanian Standards Board
Portal for draft standards

Extended search

till

Results

Showing:
ISO 23591:2021/DAmd 1 Public enquiry
Comment end date 2024-12-25
Acoustic quality criteria for music rehearsal rooms and spaces — Amendment 1: Asian (Korean) traditional music (Gugak)
prEN ISO 9613-2 Public enquiry
Comment end date 2024-12-09
Acoustics - Attenuation of sound during propagation outdoors - Part 2: Engineering method for the prediction of sound pressure levels outdoors (ISO 9613-2:2024)

This document specifies an engineering method for calculating the attenuation of sound during propagation outdoors in order to predict the levels of environmental noise at a distance from a variety of sources. The method predicts the equivalent continuous A-weighted sound pressure level (as described in ISO 1996-series) under meteorological conditions favourable to propagation from sources of known sound emission. These conditions are for downwind propagation or, equivalently, propagation under a well-developed moderate ground‑based temperature inversion, such as commonly occurs in clear, calm nights. Inversion conditions over extended water surfaces are not covered and may result in higher sound pressure levels than predicted from this document (see e.g. References [11] and [12]). The method also predicts a long-term average A‑weighted sound pressure level as specified in ISO 1996-1 and ISO 1996-2. The long-term average A‑weighted sound pressure level encompasses levels for a wide variety of meteorological conditions. Guidance has been provided to derive a meteorological correction based on the angular wind distribution relevant for the reference or long-term time interval as specified in ISO 1996-1:2016, 3.2.1 and 3.2.2. Examples for reference time intervals are day, night, or the hour of the night with the largest value of the sound pressure level. Long-term time intervals over which the sound of a series of reference time intervals is averaged or assessed representing a significant fraction of a year (e.g. 3 months, 6 months or 1 year). The method specified in this document consists specifically of octave band algorithms (with nominal mid-band frequencies from 63 Hz to 8 kHz) for calculating the attenuation of sound which originates from a point sound source, or an assembly of point sources. The source (or sources) may be moving or stationary. Specific terms are provided in the algorithms for the following physical effects: —     geometrical divergence; —     atmospheric absorption; —     ground effect; —     reflection from surfaces; —     screening by obstacles. Additional information concerning propagation through foliage, industrial sites and housing is given in Annex A. The directivity of chimney-stacks to support the sound predictions for industrial sites has been included with Annex B. An example how the far-distance meteorological correction C0 can be determined from the local wind-climatology is given in Annex C. Experiences of the last decades how to predict the sound pressure levels caused by wind turbines is summarized in Annex D. The method is applicable in practice to a great variety of noise sources and environments. It is applicable, directly, or indirectly, to most situations concerning road or rail traffic, industrial noise sources, construction activities, and many other ground-based noise sources. It does not apply to sound from aircraft in flight, or to blast waves from mining, military, or similar operations. To apply the method of this document, several parameters need to be known with respect to the geometry of the source and of the environment, the ground surface characteristics, and the source strength in terms of octave band sound power levels for directions relevant to the propagation. If only A‑weighted sound power levels of the sources are known, the attenuation terms for 500 Hz may be used to estimate the resulting attenuation. The accuracy of the method and the limitations to its use in practice are d

Quick filters

ICS
Fizikinės dirvožemio savybės (1) Cheminės dirvožemio charakteristikos (1) Keraminės plytelės (1) Acoustic measurements and noise abatement in general (1) Acoustics in building. Sound insulation (1) Advanced ceramics (2) Aerospace electric equipment and systems (8) Agricultural tractors and trailed vehicles (1) Aids for disabled and handicapped persons in genera (1) Alarm and warning systems (1) Anaesthetic, respiratory and reanimation equipment (4) Automatic controls for household use (3) Binders. Sealing materials (1) Biofuels (3) Biological evaluation of medical devices (2) Biology. Botany. Zoology (2) Bolts, screws, studs (3) Building accessories (3) Ceilings. Floors. Stairs (1) Cellular materials (1) Chemical laboratories. Laboratory equipment (3) Chimneys, shafts, ducts (1) Cleaning appliances (1) Company organization and management in general (1) Components for conveyors (2) Construction of railways (5) Cooking ranges, working tables, ovens and similar appliances (1) Cookware, cutlery and flatware (1) Cosmetics. Toiletries (1) Dental implants (1) Electric road vehicles (1) Electric tools (2) Electrical apparatus for explosive atmospheres (1) Emission (2) Environment. Health protection. Safety (Vocabularies) (1) Environmental testing (1) Ergonomics (1) Exploratory, drilling and extraction equipment (2) Ferrous metals in general (1) Fibre optic interconnecting devices (1) Fibres and cables (1) Fire protection (1) Fish and fishery products (1) Fixed capacitors (1) Fixed resistors (8) Floor coverings (2) FLUID SYSTEMS AND COMPONENTS FOR GENERAL USE (1) Fuel systems (1) Furniture (2) Fuses and other overcurrent protection devices (1) Generators (1) Geometrical Product Specification (GPS) (1) Graphical symbols for use on specific equipment (1) Head protective equipment (1) Home textiles. Linen (1) Hoses and hose assemblies (3) In vitro diagnostic test systems (2) Information sciences (1) Information technology (IT) in general (1) Inland navigation vessels (1) Insulating materials in general (1) Interface and interconnection equipment (1) IT applications in transport (1) IT Security (3) Lamps in general (1) Leather and furs (2) Lighting installation systems (1) Luminaires (2) Magnetic materials (1) Management systems (1) Materials and articles in contact with foodstuffs (3) Materials and components for railway engineering (1) Measurement of electrical and magnetic quantities (1) Mechanical testing of metals (1) Metallic coatings (1) Natural gas (2) Networking (1) Non-destructive testing (2) Nuts (2) Other kitchen equipment (1) Other lifting equipment (1) Other pipeline components (1) Other products of the chemical industry (1) Packaging and distribution of goods in general (1) Petroleum products and natural gas handling equipment (1) Pins, nails (1) Piping and couplings (2) Plants and equipment for the food industry (2) Plastics fittings (1) Plastics in general (1) Plug-and-socket devices. Connectors (3) Power transmission and distribution lines (6) Printed circuits and boards (3) Product and company certification. Conformity assessment (1) Quality and environmental management in health care (2) Radiation measurements (1) Radiographic equipment (1) Railway rolling stock in general (3) Recycling (13) Rivets (1) Road construction materials (1) Rubber and plastics (1) Safety of machinery (1) Semi-manufactures of timber (1) Semiconductor devices in general (3) Solar energy engineering (1) Solid fuels (1) Steels (1) Surface preparation (2) Technical product documentation (1) TELECOMMUNICATIONS. AUDIO AND VIDEO ENGINEERING (10) Temperature-measuring instruments (1) Textile fibres in general (1) Textiles in general (1) Thermal and sound insulating materials (3) Thermoplastic materials (1) Toys (4) Water supply systems (2) Welding, brazing and soldering in general (1) Wood-based panels in general (2) Workplace atmospheres (1)