GDPR

projektai-lsd Lithuanian Standards Board
Portal for draft standards

Extended search

till

Results

Showing:
prEN 3-7 Public enquiry
Comment end date 2025-07-08
Portable fire extinguishers - Part 7: Characteristics, performance requirements and test methods

This document specifies the characteristics, performance requirements and test methods for portable fire extinguishers. Reference to the suitability of an extinguisher for use on gaseous fires (Class C fires) are at the manufacturer’s discretion but are applied only to powder type extinguishers which have gained a Class B or Class A and Class B rating. Suitability of extinguishers for use on Class D fires (fires involving flammable metals) is outside the scope of this document in respect of test fires. However, extinguishers claiming Class D suitability are covered in all other respects by the requirements in this document for powder extinguishers. It is considered hazardous for powder and carbon dioxide fire extinguishers to be used on Class F fires. For this reason, powder and carbon dioxide fire extinguishers are excluded for conformance with regard to Class F in this document. NOTE The extinction of a metal fire presents a situation so specific (in terms of the metal itself, its form, the configuration of the fire etc.) that it is not possible to define a representative standard fire for the purposes of testing. The efficiency of extinguishers on Class D fires is established on a case by case basis.

prEN 1568-2 Public enquiry
Comment end date 2025-06-10
Fire extinguishing media - Foam concentrates - Part 2: Specification for high expansion foam concentrates for surface application to water-immiscible liquids

This European Standard specifies requirements for chemical and physical properties, and minimum performance requirements of high expansion foams suitable for surface application to water-immiscible liquids. Requirements are also given for marking. WARNING - Any type approval according to this standard is invalidated by any change in composition of the approved product. Some concentrates conforming to this part of EN 1568 can also conform to other parts and therefore can also be suitable for application as low and/or medium expansion foams.

prEN 1568-1 Public enquiry
Comment end date 2025-06-10
Fire extinguishing media - Foam concentrates - Part 1: Specification for medium expansion foam concentrates for surface application to water-immiscible liquids

This European Standard specifies requirements for chemical and physical properties, and minimum performance requirements of medium expansion foams suitable for surface application to water-immiscible liquids. Requirements are also given for marking. WARNING - Any type approval according to this standard is invalidated by any change in composition of the approved product. Some concentrates conforming to this part of EN 1568 can also conform to other parts and therefore can also be suitable for application as low and/or high expansion foams.

prEN 1568-3 Public enquiry
Comment end date 2025-06-10
Fire extinguishing media - Foam concentrates - Part 3: Specification for low expansion foam concentrates for surface application to water-immiscible liquids

This European Standard specifies requirements for chemical and physical properties, and minimum performance requirements of low expansion foams suitable for surface application to water-immiscible liquids. Requirements are also given for marking. WARNING - Any type approval according to this standard is invalidated by any change in composition of the approved product. Some concentrates conforming to this part of EN 1568 can also conform to other parts and therefore can also be suitable for application as medium and/or high expansion foams, and for application at low expansion to water-miscible liquids.

prEN 1568-4 Public enquiry
Comment end date 2025-06-03
Fire extinguishing media - Foam concentrates - Part 4: Specification for low expansion foam concentrates for surface application to water-miscible liquids

This European Standard specifies requirements for chemical and physical properties, and minimum performance requirements of low expansion foams suitable for surface application to water-miscible liquids. Requirements are also specified for marking. IMPORTANT - The fire performance is tested using acetone and isopropanol as the fuel, which also forms the basis for the performance classification. However, there are a large number of water-miscible liquids which have more or less different properties to acetone and isopropanol. It has been shown by tests using other fuels that the performance of various foams can differ considerably. Examples of such fuel is Methyl Ethyl Ketone (MEK). It is therefore essential that the user checks for any unfavourable or unacceptable loss of efficiency when the foam is used against fires in any other water-miscible fuels than acetone and isopropanol respectively. The fire test conditions and procedure given in H.2 can be used in order to achieve results comparative with acetone and isopropanol respectively and related requirements. It is also essential for the user to note that other fuel depths and methods of application than those specified in H.2 can cause considerable loss of efficiency and these matters should be carefully considered by the user when assessing the suitability for particular applications. WARNING - Any type approval according to this standard is invalidated by any change in composition of the approved product. NOTE Some concentrates conforming to this part of the EN 1568 series can also conform to other parts and therefore can also be suitable for application as medium and/or high expansion foams.

Quick filters

ICS
Vandenilio technologijos (1) Additive manufacturing (1) Aerospace electric equipment and systems (4) Aids for disabled and handicapped persons in genera (1) Aluminium products (1) Ambient atmospheres (1) Anaesthetic, respiratory and reanimation equipment (2) Biological evaluation of medical devices (1) Biology. Botany. Zoology (1) Bolts, screws, studs (4) Capacitors in general (1) Central heating systems (1) Chemical laboratories. Laboratory equipment (1) Cleaning appliances (1) Construction equipment (1) Construction industry in general (1) Cooking ranges, working tables, ovens and similar appliances (1) Cosmetics. Toiletries (1) Cranes (2) Dental equipment (3) Dental instruments (2) Dental materials (1) Dentistry in general (2) Diagnostic equipment (1) Domestic safety (6) Earth-moving machinery (1) Earthworks. Excavations. Foundation construction. Underground works (2) Ecolabelling (2) Electrical and electronic equipment (1) Electrical and electronic testing (1) Electrical engineering in general (1) Electricity supply systems (1) Electroacoustics (1) Electronic components in general (1) Electronics (Vocabularies) (2) Ergonomics (2) Examination of biological properties of water (2) Examination of water for chemical substances (1) Exploratory, drilling and extraction equipment (1) External sewage systems (1) Fibre optic interconnecting devices (1) Fibres and cables (2) Fire-fighting (5) Fire-resistance of building materials and elements (1) Fissile materials and nuclear fuel technology (1) Flat steel products and semi-products (1) Floor coverings (1) Furniture (1) Gas cylinders (2) Governance and ethics (1) Ground service and maintenance equipment (1) Heaters using other sources of energy (1) In vitro diagnostic test systems (1) Industrial trucks (2) Information technology (IT) in general (1) Internal combustion engines (1) Iron and steel castings (1) IT applications in banking (1) IT applications in health care technology (4) IT Security (3) Laboratory medicine in general (1) Laminated sheets (1) Liquid fuels (1) Low voltage switchgear and controlgear (1) Management of human resources (2) Management systems (1) Materials and articles in contact with foodstuffs (1) Measurement of electrical and magnetic quantities (1) Medical equipment in general (1) Metro, tram and light rail equipment (1) Microbiology of water (1) Noise emitted by machines and equipment (1) Ophthalmic equipment (6) Optic amplifiers (1) Optoelectronics. Laser equipment (3) Other methods of testing of metals (1) Other rubber and plastics products (1) Other semiconductor devices (1) Other standards related to lamps (1) Paints and varnishes (1) Petroleum products in general (2) Piezoelectric devices (5) Pigments and extenders (1) Pins, nails (1) Poultry and eggs (1) Power transmission and distribution lines (3) Pressure regulators (1) Product and company certification. Conformity assessment (2) Pumps (1) Quality and environmental management in health care (1) Radio receivers (1) Railway engineering in general (1) Railway rolling stock in general (1) Relays (2) RF connectors (2) Road construction materials (3) Sacks. Bags (1) Seals for pipe and hose assemblies (1) Semi-manufactures of timber (3) Services. Company organization, management and quality. Administration. Transport. Sociology. (Vocabularies) (1) Smart textiles (1) Spices and condiments (3) Steel profiles (1) Sterilizing equipment (1) Technical product documentation (1) TELECOMMUNICATIONS. AUDIO AND VIDEO ENGINEERING (13) Temperature-measuring instruments (1) Theatre, stage and studio equipment (1) Transfusion, infusion and injection equipment (1) Ventilation and air-conditioning systems (1) Veterinary medicine (1) Vibrations, shock and vibration measurements (1) Water supply systems (1) Welding, brazing and soldering in general (1) Wood-based panels in general (1) Wood-protecting chemicals (1) Writing and transliteration (2)