GDPR

projektai-lsd Lithuanian Standards Board
Portal for draft standards

Extended search

till

Results

Showing:
prEN ISO 21224 Public enquiry
Comment end date 2027-01-10
Evaluation of centreline segregation of continuously cast slabs (ISO 21224:2025)

This document specifies a procedure for the evaluation of centreline segregation of continuously cast slabs, including sampling, sample preparation and evaluation method. This document is applicable for low carbon steel slabs for pipe production manufactured by continuous casting. These steels have a typical chemical composition as follows (mass percentages): — C ≤ 0,12 % — Mn ≤ 2,0 % — Si ≤ 0,5 % — Ti + Nb + V ≤ 0,2 % The common dimensions of these slabs are in the following ranges: — Slab width: 800 mm to 2 600 mm — Slab thickness: 150 mm to 450 mm The evaluation methods covered by this document are based on macroscopic etching of slab samples followed by visual inspection by means of human eye or camera systems. The procedures for sampling described in 5.1 to 5.3 of this document are applicable to steels slabs in general (e. g. other steel grades or dimensions). However, the etching procedure (see 5.4) in combination with the evaluation methods described in Clause 6 have been developed especially for the application on pipeline steels as given above. Thus, they are not applicable to other steel grades, product types or dimensions without a prior validation. Any extension or modification beyond the scope of this document necessitates a separate agreement between producer and customer.

Quick filters

ICS
Cheminės dirvožemio charakteristikos (1) Acid secondary cells and batteries (2) Aerials (1) Aerospace electric equipment and systems (1) Alarm and warning systems (1) Ambient atmospheres (2) Anaesthetic, respiratory and reanimation equipment (3) Application of information technology in general (2) Audio, video and audiovisual systems in general (1) Binders. Sealing materials (1) Biology. Botany. Zoology (6) Boilers and heat exchangers (1) Brazing and soldering (1) Building accessories (1) Buildings and installations for processing and storage of agricultural produce (1) Cement. Gypsum. Lime. Mortar (1) Chemical laboratories. Laboratory equipment (1) Chemicals for purification of water (9) Cleaning appliances (7) Cleanrooms and associated controlled environments (1) Coaxial cables. Waveguides (1) Commercial refrigerating appliances (1) Concrete and concrete products (2) Conveyors (1) Cranes (1) Dental implants (1) Diagnostic equipment (1) Disinfectants and antiseptics (1) Domestic electrical appliances in general (2) Domestic refrigerating appliances (2) Domestic safety (10) Earthworks. Excavations. Foundation construction. Underground works (2) Electric road vehicles (3) Electrical and electronic equipment (11) Electrical and electronic equipment. Control systems (1) Electrical equipment of ships and of marine structure (1) Electroacoustics (1) Emission (1) Environment. Health protection. Safety (Vocabularies) (1) Exploratory, drilling and extraction equipment (2) Fertilizers (1) Fibre optic interconnecting devices (1) Fibres and cables (1) Fire protection (2) Fire-fighting (4) Fire-resistance of building materials and elements (1) Fissile materials and nuclear fuel technology (1) Flat steel products and semi-products (2) Floor coverings (2) Food microbiology (1) Forensic science (1) Furniture (2) Fuses and other overcurrent protection devices (2) Gas cylinders (1) Gas heaters (1) Geometrical Product Specification (GPS) (1) Geotextiles (1) Governance and ethics (1) Hand-operated tools (1) Home economics in general (4) Identification cards. Chip cards. Biometrics (1) Immunity (1) Insulators (1) Integrated circuits. Microelectronics (3) Interior finishing (3) Iron and steel castings (1) IT applications in health care technology (1) IT applications in information, documentation and publishing (1) IT applications in science (1) IT applications in transport (2) IT Security (3) Items of art and handicrafts. Cultural property and heritage (1) Laboratory medicine in general (2) Laminated sheets (1) Laundry appliances (2) Leather and furs (1) Lifts. Escalators (1) Lines, connections and circuits (1) Liquid fuels (1) Luminaires (3) Maintenance services. Facilities management (1) Materials and components for railway engineering (1) Measurement of electrical and magnetic quantities (2) Mechanical testing of metals (1) Metallic coatings (1) Mining equipment in general (1) Multilayer applications (1) Navigation and control equipment (1) Networking (1) Non-ferrous metal pipes (2) Other fibre optic equipment (1) Other fluid power system components (1) Other kitchen equipment (3) Other methods of testing of metals (1) Other semiconductor devices (2) Other standards related to lamps (1) Paints and varnishes (2) Petroleum products in general (1) Plastics in general (2) Playgrounds (3) Plug-and-socket devices. Connectors (1) Power transmission and distribution networks in general (1) Primary cells and batteries (1) Printed circuits and boards (3) Product life-cycles (1) Properties of surfaces (1) Protection against falling and slipping (1) Protective clothing (1) Pumps (2) Radiographic equipment (1) Refrigerating technology (1) Reinforced plastics (1) Relays (1) RF connectors (2) Road equipment and installations (1) Roofs (1) Safety of machinery (2) Seismic and vibration protection (1) Smart textiles (1) Solar energy engineering (1) Stainless steels (3) Stationary containers and tanks (1) Steel structures (3) Steel wire, wire ropes and link chains (1) Sterilizing equipment (1) Surface preparation (2) Technical aspects (6) TELECOMMUNICATIONS. AUDIO AND VIDEO ENGINEERING (11) Telecontrol. Telemetering (2) Textile fabrics (1) Textiles in general (2) Thermal and sound insulating materials (5) Thermoplastic materials (1) Timber structures (1) Transformers. Reactors (2) Valves in general (2) Ventilation and air-conditioning systems (1) Ventilators. Fans. Air-conditioners (2) Walls. Partitions. Façades (3) Wastes in general (1) Water supply systems (6) Welded joints and welds (5) Welding consumables (1) Welding equipment (1) Welding, brazing and soldering in general (1) Wind turbine energy systems (1) Wires (11)