GDPR

projektai-lsd Lithuanian Standards Board
Portal for draft standards

Extended search

till

Results

Showing:
Total records found: 40
arrow-prev 1 2
prEN IEC 60335-2-72:2026/prAA:2026 Public enquiry
Comment end date 2026-11-08
Household and similar electrical appliances - Safety - Part 2-72: Particular requirements for floor treatment machines with or without traction drive, for commercial use

his Document deals with the safety of powered ride-on and powered walk-behind machines intended for commercial indoor or outdoor use for the following applications: - sweeping, - scrubbing, - wet or dry pick-up, - polishing, - application of wax, sealing products and powder-based detergents, - shampooing of floors. These machines have a cleaning motion which is more linear than lateral or periodic. This standard applies to machines for commercial use. The following list, although not comprehensive, gives an indication of locations that are included in the scope: - public use areas such as hotels, schools, hospitals; - industrial locations, for example factories and manufacturing shops; - retail outlets, for example shops and supermarkets; - business premises, for example offices and banks; - all uses other than normal housekeeping purposes. These machines may be equipped with a traction drive system. The following power systems are covered: - internal combustion engines, - mains powered motors up to a rated voltage of 250 V for single-phase appliances and 480 V for other appliances, - battery-operated machines. Battery-operated machines may be equipped with a built-in battery charger. This standard does not apply to - floor treatment appliances for household use (IEC 60335-2-10); - floor treatment machines for commercial use (IEC 60335-2-67); - spray extraction machines for commercial use (IEC 60335-2-68); - wet and dry vacuum cleaners, including power brush, for commercial use (IEC 60335-2-69); - road sweepers; - machines designed for use on slopes with a gradient exceeding 20 %; - machines equipped with a power take-off (PTO); - machines designed for use in corrosive or explosive environments (dust, vapour or gas); - machines designed for picking up hazardous dusts (as defined in IEC 60335-2-69), inflammable substances, or glowing particles; - machines designed for use in vehicles or on board of ships or aircraft.

prEN IEC 60335-2-79:2026/prAA:2026 Public enquiry
Comment end date 2026-11-08
Household and similar electrical appliances - Safety - Part 2-79: Particular requirements for high pressure cleaners and steam cleaners

-

prEN IEC 60335-2-79:2026 Public enquiry
Comment end date 2026-11-08
Household and similar electrical appliances - Safety - Part 2-79: Particular requirements for high pressure cleaners and steam cleaners

This standard deals with the safety of high-pressure cleaners without traction drive, intended for household and commercial indoor or outdoor use, having a rated pressure not less than 2,5 MPa and not exceeding 35 MPa. It also applies to steam cleaners and those parts of hot water high pressure cleaners incorporating a steam stage which have a capacity not exceeding 100 l, a rated pressure not exceeding 2,5 MPa and a product of capacity and rated pressure not exceeding 5 MPa·l. They are not equipped with a traction drive. The following power systems of the drive for the high pressure pump are covered: - mains powered motors up to a rated voltage of 250 V for single-phase machines and 480 V for other machines, - battery-operated motors, - internal combustion engines, - hydraulic or pneumatic motors. This standard does not apply to: - high pressure water jet machines having a rated pressure exceeding 35 MPa; - liquid or steam cleaners intended for domestic use (IEC 60335-2-54); - hand-held and transportable motor-operated electric tools (IEC 60745 series, IEC 61029 series, IEC 62841 series); - appliances for medical purposes (IEC 60601); - agricultural sprayers (ISO 4254-6); - non-liquid, solid abrasive cleaners; - machines designed to be part of a production process; - machines designed for use in corrosive or explosive environments (dust, vapour or gas); - machines designed for use in vehicles or on board of ships or aircraft.

prEN IEC 60335-2-72:2026 Public enquiry
Comment end date 2026-11-08
Household and similar electrical appliances - Safety - Part 2-72: Particular requirements for floor treatment machines with or without traction drive, for commercial use

This Document deals with the safety of powered ride-on and powered walk-behind machines intended for commercial indoor or outdoor use for the following applications: - sweeping, - scrubbing, - wet or dry pick-up, - polishing, - application of wax, sealing products and powder-based detergents, - shampooing of floors. These machines have a cleaning motion which is more linear than lateral or periodic. This standard applies to machines for commercial use. The following list, although not comprehensive, gives an indication of locations that are included in the scope: - public use areas such as hotels, schools, hospitals; - industrial locations, for example factories and manufacturing shops; - retail outlets, for example shops and supermarkets; - business premises, for example offices and banks; - all uses other than normal housekeeping purposes. These machines may be equipped with a traction drive system. The following power systems are covered: - internal combustion engines, - mains powered motors up to a rated voltage of 250 V for single-phase appliances and 480 V for other appliances, - battery-operated machines. Battery-operated machines may be equipped with a built-in battery charger. This standard does not apply to - floor treatment appliances for household use (IEC 60335-2-10); - floor treatment machines for commercial use (IEC 60335-2-67); - spray extraction machines for commercial use (IEC 60335-2-68); - wet and dry vacuum cleaners, including power brush, for commercial use (IEC 60335-2-69); - road sweepers; - machines designed for use on slopes with a gradient exceeding 20 %; - machines equipped with a power take-off (PTO); - machines designed for use in corrosive or explosive environments (dust, vapour or gas); - machines designed for picking up hazardous dusts (as defined in IEC 60335-2-69), inflammable substances, or glowing particles; - machines designed for use in vehicles or on board of ships or aircraft.

prEN IEC 60335-2-69:2026 Public enquiry
Comment end date 2026-11-08
Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush for commercial use

This standard deals with the safety of electrical motor-operated vacuum cleaners, including back-pack vacuum cleaners, and dust extractors, for wet suction, dry suction, or wet and dry suction, intended for commercial indoor or outdoor use with or without attachments. These machines may be provided with a blowing or inflating function. The inner diameter of the dust container connector to the suction hose shall not exceed 200 mm. It also deals with the safety of centrally-sited vacuum cleaners, excluding the installation of the system. Attention is drawn to the fact that additional requirements on the safe installation of centrally-sited vacuum cleaners are not addressed by this standard but need to be taken into account. This standard applies to machines for commercial use. The following list, although not comprehensive, gives an indication of locations that are included in the scope: – public use areas such as hotels, schools, hospitals; – industrial locations, for example factories and manufacturing shops; – retail outlets, for example shops and supermarkets; – business premises, for example offices and banks; – all uses other than normal housekeeping purposes. These machines are not equipped with a traction drive. The following power systems are covered: – mains powered motors up to a rated voltage of 250 V for single-phase appliances and 480 V for other appliances, – battery-operated motors. This standard also applies to machines handling hazardous dust, such as asbestos, and combustible dust in other than an explosive dust atmosphere. Additional requirements for machines handling hazardous dust are given in normative Annex AA. Attention is drawn to the fact that in many countries additional requirements on hazardous substances might apply. Radioactive substances are not covered by definition of hazardous dust for the purposes of this standard. This standard does not apply to – vacuum cleaners and water-suction cleaning appliances for household use (IEC 60335-2-2); – floor treatment machines for commercial use (IEC 60335-2-67, IEC 60335-2-72); – spray extraction machines for commercial use (IEC 60335-2-68); IEC 60335-2-67 and IEC 60335-2-68 cover only machines without traction drive. – hand-held mains-operated electrical garden blowers, vacuums and blower vacuums (IEC 60335-2-100); – hand-held and transportable motor-operated electric tools (IEC 60745 series, IEC 61029 series, IEC 62841 series); – appliances for medical purposes (IEC 60601-1); – machines designed for use in corrosive environments; – machines designed for picking up liquids with a flash point below 55 °C; – machines designed for use in explosive environments (dust, vapour or gas), except those designed for use in zone 22; – machines intended to vacuum ash from fireplaces, chimneys, ovens, ashtrays and similar places of ash accumulation.

prEN IEC 60335-2-68:2026 Public enquiry
Comment end date 2026-11-08
Household and similar electrical appliances - Safety - Part 2-68: Particular requirements for spray extraction machines, for commercial use

This standard deals with the safety of electrical portable, non-self-propelled motor-operated spray extraction machines with or without attachments and with or without electrical heating elements, intended for commercial indoor use. This standard applies to machines for commercial use. The following list, although not comprehensive, gives an indication of locations that are included in the scope: - public use areas such as hotels, schools, hospitals; - industrial locations, for example factories and manufacturing shops; - retail outlets, for example shops and supermarkets; - business premises, for example offices and banks; - rental services for those machines; - all uses other than normal housekeeping purposes. The following power systems are covered: - mains powered motors up to a rated voltage of 250 V for single-phase appliances and 480 V for other appliances, - battery-operated machines. This standard applies to machines in which the pressure of the employed cleaning agent does not exceed 2,5 MPa, and in which the product of the pressure (in MPa) and the flow of cleaning agent (in litres per minute) does not exceed 100, and in which the temperature of the cleaning agent at the spray nozzle outlet does not exceed 85 °C. This standard does not apply to - vacuum cleaners and water-suction cleaning appliances for household use (IEC 60335-2-2); - floor treatment machines for commercial use (IEC 60335-2-67, IEC 60335-2-72); - wet and dry vacuum cleaners, including power brush, for commercial use (IEC 60335-2-69); - hand-held and transportable motor-operated electric tools (IEC 60745 series, IEC 61029 series, IEC 62841 series). - machines designed for use in corrosive or explosive environments (dust, vapour or gas); - machines designed for picking up hazardous dusts (as defined in IEC 60335-2-69), inflammable substances, or glowing particles; - machines designed to handle hazardous solvents, such as flammable or explosive liquids;

prEN IEC 60335-2-67:2026 Public enquiry
Comment end date 2026-11-08
Household and similar electrical appliances - Safety - Part 2-67: Particular requirements for floor treatment machines, for commercial use

This standard deals with the safety of powered floor treatment machines intended for commercial indoor or outdoor use for the following applications: - scrubbing, - wet or dry pick-up, - polishing and dry buffing, - application of wax, sealing products and powder based detergents, - shampooing, - stripping, grinding and scarifying of floors with an artificial surface. These machines have a cleaning motion which is more lateral or periodic than linear. This standard applies to machines for commercial use. The following list, although not comprehensive, gives an indication of locations that are included in the scope: - public use areas such as hotels, schools, hospitals; - industrial locations, for example factories and manufacturing shops; - retail outlets, for example shops and supermarkets; - business premises, for example offices and banks; - all uses other than normal housekeeping purposes. These machines are not equipped with a traction drive. The following power systems are covered: - internal combustion engines, - mains powered motors up to a rated voltage of 250 V for single-phase appliances and 480 V for other appliances, - battery-operated machines. Battery-operated machines may be equipped with a built-in battery charger.

prEN IEC 60598-2-5:2026 Public enquiry
Comment end date 2026-11-08
Luminaires - Part 2-5: Particular requirements - Floodlights
prEN IEC 60598-2-3:2026 Public enquiry
Comment end date 2026-11-08
Luminaires - Part 2-3: Particular requirements - Luminaires for road and street lighting
EN 55016-1-6:2015/prA3 (Frag 4):2026 Public enquiry
Comment end date 2026-10-25
Amendment 3 - Fragment 4: NSA
FprEN IEC 60086-1:2025/prAA:2026 Public enquiry
Comment end date 2026-10-18
Primary batteries - Part 1: General
prEN IEC 60335-2-73:2026/prAA:2026 Public enquiry
Comment end date 2026-10-18
Household and similar electrical appliances - Safety - Part 2-73: Particular requirements for fixed immersion heaters

This standard deals with the safety of electric thermal-storage room heaters intended to heat the room in which they are located, their rated voltage being not more than 250 V for single phase and 480 V for other appliances.

prEN IEC 60335-2-73:2026 Public enquiry
Comment end date 2026-10-18
Household and similar electrical appliances - Safety - Part 2-73: Particular requirements for fixed immersion heaters

This European standard deals with the safety of electric thermal-storage room heaters intended to heat the room in which they are located, their rated voltage being not more than 250 V for single phase and 480 V for other appliances.

prEN IEC 63560:2026 Public enquiry
Comment end date 2026-10-11
Germicidal equipment - Excimer sources - Safety
prEN IEC 60669-2-1:2026 Public enquiry
Comment end date 2026-10-11
Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic control devices
Total records found: 40
arrow-prev 1 2

Quick filters

Technical Committee
TK 1 Electronics (34) TK 4 Information technology (3) TK 5 Electrical engineering (40) TK 9 Furniture (1) TK 12 Motor - roads (1) TK 18 Telecommunications (18) TK 20 Toys, child use articles, sports and other recreational equipment (1) TK 21 Textiles and personal protective equipment (1) TK 22 Fire safety (5) TK 24 Quality management and quality assurance (1) TK 25 Matrix, gypsum and gypsum based products (10) TK 26 Thermal insulation materials (1) TK 28 Gas systems (1) TK 29 Water supply (10) TK 31 Acoustics (1) TK 32 Health (12) TK 35 Safety of machinery (2) TK 36 Environmental protection (5) TK 38 Building constructions (15) TK 39 Protection (2) TK 40 Petroleuml, petroleum products, lubricants and alternative fuels (2) TK 41 Welding (8) TK 45 Electric power (4) TK 46 Roofs and building waterproof isolation (6) TK 49 Metallic materials (9) TK 50 Heating and Ventilation Systems (3) TK 51 Food analysis- Horizontal methods (2) TK 52 Ophthalmic optics and lasers (1) TK 56 Metal liquid tanks and industrial pipelines (1) TK 57 Fertilizers (2) TK 59 Geotechnics (3) TK 60 Windows and doors (4) TK 68 Plastics (4) TK 70 Pulp, paper, board, adhesives (3) TK 76 Explosive atmospheres (6) TK 79 IT security techniques (3) TK 80 Road transport and traffic telematics (1) TK 81 Conservation of cultural property (1) TK 82 Safety of trackless overground vehicles (1) TK 83 Assessment of workplace exposure to chemical and biological agents (1) TK 87 Biotechnology (8) TK 88 Building Information Modelling (BIM) (1) TK 89 Risk management and organizational governance (1) TK 91 Asset management and technical maintenance (1) TK 94 Circural economy (1) TK 99 Health Informatics (1)
ICS
Hidrologinės dirvožemio savybės (1) Acid secondary cells and batteries (3) Adhesives (3) Aerospace electric equipment and systems (5) Alarm and warning systems (1) Alcohols. Ethers (1) Aluminium and aluminium alloys (1) Aluminium products (1) Ambient atmospheres (1) Amplifiers (3) Anaesthetic, respiratory and reanimation equipment (6) Application of information technology in general (1) Binders. Sealing materials (1) Biology. Botany. Zoology (8) Boilers and heat exchangers (1) Brazing and soldering (1) Building accessories (1) Cellular materials (1) Cement. Gypsum. Lime. Mortar (10) Chemical analysis (1) Chemical laboratories. Laboratory equipment (4) Chemicals for purification of water (3) Cleaning appliances (6) Cleanrooms and associated controlled environments (1) Coaxial cables. Waveguides (1) Colour coding (1) Cooking ranges, working tables, ovens and similar appliances (1) Cranes (1) Diagnostic equipment (1) Disinfectants and antiseptics (1) Domestic safety (6) Earthworks. Excavations. Foundation construction. Underground works (3) Ecolabelling (1) Electric road vehicles (3) Electrical and electronic equipment (2) Electrical and electronic testing (1) Electrical apparatus for explosive atmospheres (4) Electrical engineering in general (1) Electrical equipment of ships and of marine structure (1) Emission (1) Environmental economics. Sustainability (1) Equipment for children (1) Exploratory, drilling and extraction equipment (1) Fertilizers (1) Fibre optic interconnecting devices (1) Fibres and cables (1) Fire protection (1) Fire-fighting (4) Fire-resistance of building materials and elements (1) Flat steel products and semi-products (2) Floor coverings (1) Food microbiology (1) Furniture (1) Fuses and other overcurrent protection devices (2) Generators (1) Geometrical Product Specification (GPS) (1) Governance and ethics (1) Hand and arm protection (1) Hand-operated tools (1) Health care technology (Vocabularies) (1) Home economics in general (2) Immunity (1) Implants for surgery, prosthetics and orthotics (1) Information technology (IT) in general (1) Integrated circuits. Microelectronics (2) Iron and steel pipes (1) IT applications in information, documentation and publishing (1) IT applications in science (1) IT applications in transport (1) IT Security (3) Items of art and handicrafts. Cultural property and heritage (1) Laminated sheets (1) Laundry appliances (2) Leather and furs (2) Liquid fuels (1) Luminaires (3) Maintenance services. Facilities management (1) Materials and components for railway engineering (1) Mechanical testing of metals (1) Mining equipment in general (1) Miscellaneous domestic and commercial equipment (1) Multilayer applications (1) Networking (2) Non-ferrous metal pipes (2) Oilseeds (1) Ophthalmic equipment (1) Other fluid power system components (1) Other kitchen equipment (1) Other lifting equipment (1) Other semiconductor devices (2) Paints and varnishes (2) Petroleum products and natural gas handling equipment (1) Pipelines and its parts for district heat (1) Plastics in general (1) Plug-and-socket devices. Connectors (1) Primary cells and batteries (2) Printed circuits and boards (3) Product and company certification. Conformity assessment (1) Protection against crime (1) Protection against falling and slipping (1) Pumps (2) Radiation measurements (1) Radiographic equipment (1) Railway rolling stock in general (2) Refrigerating technology (1) Relays (1) RF connectors (2) Rivets (1) Road construction materials (1) Road equipment and installations (1) Roofs (1) Safety of machinery (1) Seismic and vibration protection (1) Small craft (3) Small kitchen appliances (1) Stainless steels (2) Stationary containers and tanks (1) Stationary source emissions (1) Steel structures (3) Sterilization and disinfection in general (1) Sterilizing equipment (1) Surface preparation (4) Switches (1) Technical aspects (7) TELECOMMUNICATIONS. AUDIO AND VIDEO ENGINEERING (18) Thermal and sound insulating materials (6) Timber structures (1) Transformers. Reactors (2) Ventilators. Fans. Air-conditioners (3) Vibration and shock with respect to human beings (1) Walls. Partitions. Façades (3) Washers and other locking elements (1) Water heating equipment (2) Water supply systems (7) Welded joints and welds (5) Welding equipment (2) Wires (11) Wood-protecting chemicals (2) Wood, sawlogs and sawn timber (1) Workplace atmospheres (1)