Standartų projektų sąrašas

Paieškos frazė

Išplėstinė paieška

Žymuo

Direktyvos

Organizacija

ICS

Technikos komitetas

Užsienio komitetas

Darbo grupė

Etapas

Būsena

Komentavimo data

iki

Rezultatai

prEN 17968 Viešoji apklausa

Komentavimo iki data 2025-08-25

Visureigiai kintamojo siekio traktoriai. Stacionariai tvirtinamos įrangos saugos reikalavimai ir patikrinimas

This document specifies the safety requirements relevant to load-handling functions for rough-terrain variable reach tractors (RTVR tractors). This includes the safety requirements for their permanently mounted equipment (PME). Fork arms are considered to be part of the PME. RTVR tractors can also be equipped with a variety of attachments (e.g. bale spikes, mowers, sweepers). This document deals with all the significant hazards, hazardous situations and events relevant to the operation of the PME of RTVR tractors when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A). This document does not apply to: - rough-terrain variable-reach trucks covered by EN 1459-1:2025; - slewing rough-terrain variable-reach trucks covered by EN 1459-2:2015+A1:2018; - industrial variable reach trucks covered by EN ISO 3691-2:2023; - lorry-mounted variable-reach trucks covered by ISO 20297-1:2017; - variable-reach trucks fitted with tilting or elevating operator position; - mobile cranes covered by EN 13000:2010+A1:2014; - machines designed primarily for earth moving, even if their buckets and blades are replaced with forks (see EN 474 series); - trucks designed primarily with variable length load suspension elements (e.g. chain, ropes) from which the load can swing freely in all directions; - trucks designed primarily for container handling; - trucks on tracks; - trucks with articulated chassis; - front loaders covered by EN 12525:2000+A2:2010; - attachments. Determination and declaration of sound power level is not addressed by this document. This document does not cover sales literature. This document does not address hazards linked to: - operation of the RTVR tractor from a position other than the normal operating position or the remote control; - hybrid power systems; - gas power systems; - gasoline engine systems; - battery power systems. This document does not address hazards which can occur: a) when handling suspended loads which can swing freely (additional requirements are given in EN 1459-4:2024+A1:2025); b) when using RTVR tractors on public roads; c) when operating in potentially explosive atmospheres (additional requirements are given in EN 1755:2024); d) when operating underground; e) when towing trailers; f) when fitted with a personnel work platform (additional requirements are given in EN 1459-3:2015 and EN 1459-9:2021); g) when using system capable of controlling the speed of the RTVR tractor as set by the operator (cruise-control). This document does not provide a method of calculation for fatigue and strength of material. This document is not applicable to RTVR tractors manufactured before the date of its publication.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN ISO 3691-1 Viešoji apklausa

Komentavimo iki data 2025-08-19

Pramoniniai krautuvai. Saugos reikalavimai ir patikrinimas. 1 dalis. Savaeigiai pramoniniai krautuvai, išskyrus savivaldžius krautuvus, kintamojo siekio krautuvus ir krovinių vežtuvus (ISO/DIS 3691-1:2025)

ISO 3691-1:2011 gives safety requirements and the means for their verification for the following types of self-propelled industrial trucks, as defined in ISO 5053: industrial counterbalanced trucks; reach trucks with retractable mast or retractable fork arm carriage; straddle trucks; pallet-stacking trucks; high-lift platform trucks; trucks with elevating operator position up to 1 200 mm; side-loading trucks (one side only); lateral-stacking trucks (both sides), and lateral- and front-stacking trucks; pallet trucks; bidirectional and multidirectional trucks; tractors with a drawbar pull up to and including 20 000 N; rough-terrain, counterbalanced trucks; industrial trucks powered by battery, diesel, gasoline or LPG (liquefied petroleum gas).

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN ISO 23308-4 Viešoji apklausa

Komentavimo iki data 2025-08-19

Pramoninių krautuvų energijos vartojimo efektyvumas. Bandymo metodai. 4 dalis. Kintamojo siekio visureigiai krautuvai (ISO/DIS 23308-4:2025)

This document specifies the method of fuel consumption measurement for rough terrain- truck variable-reach trucks as defined in ISO 5053-1, herein after referred to as trucks. It does not apply to slewing trucks having a movement of more than 5° either side of the longitudinal axis. This part is intended to be used in conjunction with ISO 23308-1. Where the requirements of this part differ from that in part 1, requirements in this part 4 will take precedence.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

ISO/DIS 8820-3 Viešoji apklausa

Komentavimo iki data 2025-08-04

Road vehicles — Fuse-links — Part 3: Fuse-links with tabs (blade type) Type C (medium), Type E (high current) and Type F (miniature)

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

ISO/DIS 8092-6 Viešoji apklausa

Komentavimo iki data 2025-08-04

Kelių transporto priemonės. Vidaus elektros laidų pynių jungtys. 6 dalis. Transporto priemonėje įrengtas eternetas, bendrieji eksploatacinių charakteristikų reikalavimai ir sąsajų apibūdinimai

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

Būtini slapukai

Statistikos slapukai

El. pašto prenumerata

Išplėstinė paieška

Rezultatai

Greitieji filtrai

Organizacija

Technikos komitetas

ICS