Standartų projektų sąrašas

prEN IEC 60794-1-108:2026 Archyvuotas

Komentavimo iki data 2026-06-17

Optiniai skaiduliniai kabeliai. 1-108 dalis. Bendroji specifikacija. Pagrindinės optinių kabelių bandymo procedūros. Mechaninių bandymų metodai. Lankstymas, E8 metodas

Peržiūrėti metaduomenis

prEN IEC 60794-1-113:2026 Archyvuotas

Komentavimo iki data 2026-06-17

Optiniai skaiduliniai kabeliai. 1-113 dalis. Bendroji specifikacija. Pagrindinės optinių kabelių bandymo procedūros. Mechaninių bandymų metodai. Atsparumas šūviams, E13 metodas

Peržiūrėti metaduomenis

prEN 319 412-3 V1.4.0 (2026-04) Archyvuotas

Komentavimo iki data 2026-06-21

Electronic Signatures and Trust Infrastructures (ESI); Certificate Profiles; Part 3: Certificate profile for certificates issued to legal persons

Peržiūrėti metaduomenis

prEN 300 392-3-15 V1.5.0 (2026-04) Archyvuotas

Komentavimo iki data 2026-06-21

Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 3: Interworking at the Inter-System Interface (ISI); Sub-part 15: Transport layer independent Additional Network Feature, Mobility Management (ANF-ISIMM)

Peržiūrėti metaduomenis

prEN 300 392-12-16 V1.4.0 (2026-03) Archyvuotas

Komentavimo iki data 2026-06-21

Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 12: Supplementary services stage 3; Sub-part 16: Pre-emptive Priority Call (PPC)

Peržiūrėti metaduomenis

prEN 9300-300 Archyvuotas

Komentavimo iki data 2026-06-16

Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 300: Common concepts for Long term archiving and retrieval of Composite Structure

1 Scope 1.1 In scope This document describes: - the fundamentals and concepts for Long Term Archiving and Retrieval of CAD 3D mechanical composite information and associated composite specific PMI; - the document structure of the EN 9300-3XX family, and the links between all these parts; - the qualification methods for long term preservation of archived composite information; more specially, principles for the validation properties and for verification of the quality of the composite information archived; - specifications for the preservation planning of archived composite information; - specific functions for administration and monitoring of CAD composite archived models; - the definition of Archive Information Packages for composite CAD data. This document establishes long term archiving requirements applicable to, but not limited to, most laminated type composite items made with composite manufacturing processes such as: - hand lay-up; - tape laying; - fibre placement; - stitched resin film infusion (SRFI); - resin transfer moulding (RTM); - vacuum-assisted resin transfer moulding (VARTM); - controlled Atmospheric Pressure Resin Infusion (CAPRI); - co-cured or co-bonded composite items; - sandwich panel composite construction; - braided layers. 1.2 Out of scope The following is outside the scope of this part of EN 9300: - multi-function advanced composite structure; - composite items made with composite manufacturing processes such as filament winding, 3D braiding, or 3D weaving; NOTE Braided parts that can be represented as layered braided sleeve material can be in scope. - injection moulded fibre reinforced thermoplastics; - other Additive Manufacturing processes such as those covered by ISO/ASTM 52900; - PMI described in EN 9300-1xx series.

Peržiūrėti metaduomenis

prEN 4474 Archyvuotas

Komentavimo iki data 2026-06-16

Aerospace series - Aluminium pigmented organic coatings - Coating methods

This document specifies the application method and quality assurance for aluminium pigmented coatings as per EN 4473 for fasteners or other parts in titanium, titanium alloys, nickel or cobalt based alloys and corrosion resisting steels.

Peržiūrėti metaduomenis

prEN 4473 Archyvuotas

Komentavimo iki data 2026-06-16

Aerospace series - Aluminium pigmented organic coatings for fasteners - Technical specification

This document specifies the performance requirements of aluminium pigmented organic coatings to be applied on titanium, titanium alloys, nickel or cobalt based alloys and corrosion resistant steels. This specification does not cover electrical bonding or lightning strike applications of these coatings. Additional qualification tests will be agreed with the OEM upon qualification. NOTE These coatings are not recommended for use on non-corrosion resistant steel fasteners.

Peržiūrėti metaduomenis

prEN ISO 3377-1 Archyvuotas

Komentavimo iki data 2026-06-16

Oda. Fizikiniai ir mechaniniai bandymai. 1 dalis. Vieno krašto plėšiamosios apkrovos nustatymas (ISO/DIS 3377-1:2026)

ISO 3377-1:2011 specifies a method for determining the tear strength of leather using a single-edge tear. The method is sometimes described as a trouser tear. It is applicable to all types of leather.

Peržiūrėti metaduomenis

prEN 295-3 Archyvuotas

Komentavimo iki data 2026-06-21

Glazūruotųjų keraminių vamzdžių sistemos, skirtos nuotakynams. 3 dalis. Bandymo metodai

This document specifies requirements for testing of products manufactured from vitrified clay and other materials specified in the following standards: - pipes, fittings and joints according to EN 295-1; - adaptors, connectors and flexible couplings according to EN 295-4; - perforated pipes and fittings according to EN 295-5; - components of manholes and inspection chambers according to EN 295 6; - pipes and joints for pipe jacking according to EN 295-7.

Peržiūrėti metaduomenis

prEN 18339 Archyvuotas

Komentavimo iki data 2026-06-16

Ne skaitmeninės informacijos apie produktus ir paslaugas prieinamumas

This document specifies user requirements for the accessibility of non-digital information related to products and services. This document describes test procedures and evaluation methodologies for non-digital information technical solutions. This document is applicable to the presentation of visual, tactile and auditory based non-digital information and instructions, including: - displayed on a product - displayed on the packaging or in the packaging of products - about the use of a product - about installation and maintenance, storage and disposal of products - about products used in the provision of services and about the functioning of the service - about air, bus, rail and waterborne passenger transport services - about consumer banking services. This document is intended for use by organisations that produce products and or provide services. This document does not apply to the presentation of information by ICT products and services, for instance displayed on a screen.

Peržiūrėti metaduomenis

prEN 18340 Archyvuotas

Komentavimo iki data 2026-06-16

Su produktais ir paslaugomis susijusių pagalbos paslaugų prieinamumas

This document specifies accessibility requirements on information provision and communication in support services. This includes general information about the products and services including information on their accessibility. This document provides requirements on an accessible support service designed so that information and communication can be accessed, understood and used. Support services include but are not limited to help desks, call centres, technical support, and training services. It applies to support services that are provided digitally or face to face. NOTE 1 Where relay services are referred to in this document, relay services are a means to communicate in the provision of support services. NOTE 2 It includes support services that are provided directly and those that have been outsourced. It is applicable for all organisations of all sizes and across all sectors.

Peržiūrėti metaduomenis

prEN ISO 8102-20 Archyvuotas

Komentavimo iki data 2026-06-16

Liftams, eskalatoriams ir judamiesiems takams keliami su elektra susiję reikalavimai. 20 dalis. Kibernetinis saugumas (ISO/DIS 8102-20:2026)

This document specifies cybersecurity requirements for new lifts, escalators and moving walks, referred to in this document as “equipment under control (EUC)”, designed in accordance with the ISO 8100 series. It is also applicable with other lift, escalator and moving walk standards that specify similar requirements, and to other lift-related equipment connected to the EUC. This document specifies product and system requirements related to cybersecurity threats in the following lifecycle steps: — product development (process and product requirements); — manufacturing; — installation; — operation and maintenance; — decommissioning. This document addresses the roles of product supplier and system integrator as shown in IEC 62443-4-1:2018, Figure 2, for the EUC. This document does not address the role of asset owner as shown in IEC 62443-4-1:2018, Figure 2, but defines requirements for the product supplier and system integrator of the EUC to establish documentation allowing the asset owner, referred to as the “EUC owner” in this document, to achieve and maintain the security of the EUC. This document specifies the minimum cybersecurity requirements for: — essential functions; — safety functions; — alarm functions. This document is applicable to EUCs that are capable of connectivity to external systems such as building networks, cloud services, or service tools. The capability to connectivity can exist through equipment permanently available on site, or equipment temporarily brought to the location during the installation, operation and maintenance, or decommissioning steps. EUC interfaces to external systems and services are in the scope of this document. External systems and services as such are out of the scope of this document. This document does not apply to EUC that are installed before the date of its publication.

Peržiūrėti metaduomenis

prEN 15088 Archyvuotas

Komentavimo iki data 2026-06-21

Aliuminis ir aliuminio lydiniai. Konstrukciniai statinių gaminiai. Eksploatacinių charakteristikų vertinimas ir deklaravimas

This document covers products made of aluminium and aluminium alloys intended to be used as structural elements in construction works, including its use in installations. A product may be delivered in its final shape in coils or in one of the following forms: — extruded rods, bars, tubes and profiles; — cold-drawn rods and bars; — precision profiles; — sheets and strips including coil-coated sheets and strips; — plates including tread plates; — drawn tubes and wires; — castings; — forgings. When delivered in coils, the characteristics are assessed on samples taken after de-coiling, straightening, cutting and bending according to the applicable factory production control procedure. Procedures for assessment and verification of constancy of performance (AVCP) of characteristics of structural elements made of aluminium and aluminium alloys are specified in this document. Products delivered in other forms, e.g. delivered after machining or joining operations such as bolting and welding, are excluded from the scope of this document.

Peržiūrėti metaduomenis

prEN ISO 18119 Archyvuotas

Komentavimo iki data 2026-06-11

Dujų balionai. Besiūliai plieniniai ir besiūliai aliuminio lydinių dujų balionai ir didelio tūrio balionai. Periodinis tikrinimas ir bandymas (ISO/DIS 18119:2026)

This document specifies the requirements for periodic inspection and testing to verify the integrity of cylinders and tubes to be re-introduced into service for a further period of time. This document is applicable to seamless steel and seamless aluminium-alloy transportable gas cylinders (single or those that comprise a bundle) intended for compressed and liquefied gases under pressure, of water capacity from 0,5 l up to 150 l and to seamless steel and seamless aluminium-alloy transportable gas tubes (single or those that comprise a bundle) intended for compressed and liquefied gases under pressure, of water capacity greater than 150 l. It also applies, as far as practical, to cylinders of less than 0,5 l water capacity. This document does not apply to the periodic inspection and maintenance of acetylene cylinders or to the periodic inspection and testing of composite cylinders. NOTE Unless noted by exception, the use of the word "cylinder" in this document refers to both cylinders and tubes.

Peržiūrėti metaduomenis

prEN ISO 41001 Archyvuotas

Komentavimo iki data 2026-06-11

Kompleksinių paslaugų valdymas. Vadybos sistemos. Reikalavimai ir taikymo nurodyma (ISO/DIS 41001:2026)

ISO 41001:2018 specifies the requirements for a facility management (FM) system when an organization: a) needs to demonstrate effective and efficient delivery of FM that supports the objectives of the demand organization; b) aims to consistently meet the needs of interested parties and applicable requirements; c) aims to be sustainable in a globally-competitive environment. The requirements specified in ISO 41001:2018 are non-sector specific and intended to be applicable to all organizations, or parts thereof, whether public or private sector, and regardless of the type, size and nature of the organization or geographical location. Annex A provides additional guidance on the use of this document.

Peržiūrėti metaduomenis

prEN IEC 60079-15:2026 Archyvuotas

Komentavimo iki data 2026-06-12

Sprogiosios atmosferos. 15 dalis. Įrangos apsauga, naudojant "n" apsaugą

Peržiūrėti metaduomenis

EN 12245:2022/prA1 Archyvuotas

Komentavimo iki data 2026-06-10

Gabenamieji dujų balionai. Ištisai apvynioti kompozitiniai balionai

This document specifies minimum requirements for the materials, design, construction, prototype testing and routine manufacturing inspections of fully wrapped composite gas cylinders for compressed, liquefied and dissolved gases. NOTE 1 For the purposes of this document, the word “cylinder” includes tubes (seamless transportable pressure receptacles of a water capacity exceeding 150 l and of not more than 3 000 l). This document is applicable to cylinders that comprise a liner of metallic material (welded or seamless) or non-metallic material (or a mixture thereof), reinforced by a wound composite consisting of fibres of glass, carbon or aramid (or a mixture thereof) embedded in a matrix. This document is also applicable to composite cylinders without liners. This document is not applicable to gas cylinders which are partially covered with fibres and commonly called “hoop wrapped” cylinders. For hoop wrapped composite cylinders, see EN 12257. NOTE 2 This document does not address the design, fitting and performance of removable protective sleeves. Where these are fitted, they are considered separately. This document is primarily for compressed, liquefied and dissolved gases other than LPG. NOTE 3 For dedicated LPG cylinders, see EN 14427.

Peržiūrėti metaduomenis

Išplėstinė paieška

Rezultatai

Greitieji filtrai

Organizacija

Technikos komitetas

ICS

Būtini slapukai

Statistikos slapukai

El. pašto prenumerata

Standartų projektų sąrašas

Išplėstinė paieška

Rezultatai

Greitieji filtrai

Organizacija

Technikos komitetas

ICS