Standartų projektų sąrašas

prEN 2287 Viešoji apklausa

Komentavimo iki data 2026-09-01

Aerospace series - Bush, plain, in corrosion resisting steel with self-lubricating liner — Dimensions and loads

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN 3645-002 Viešoji apklausa

Komentavimo iki data 2026-09-01

Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 002: Specification of performance and contact arrangements

This document specifies the performances and contact arrangements for threaded ring coupling circular connectors, fire resistant or non-fire resistant, intended for use in a temperature range from −65 °C to 175 °C or 200 °C continuous.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN 3052 Viešoji apklausa

Komentavimo iki data 2026-09-01

Aerospace series - Bolt, normal hexagonal head, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated - Classification : 1 100 MPa (at ambient temperature) / 425 °C

This document specifies the characteristics of bolts, normal hexagonal head, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated. Classification: 1 100 MPa 1/ 425 °C2.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN 9300-021 Viešoji apklausa

Komentavimo iki data 2026-09-01

Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 021: Metadata for archival packages

This document specifies requirements for metadata of archive packages intended for the long-term archiving of digital product information.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

EN ISO 3093:2009/prA1 Viešoji apklausa

Komentavimo iki data 2026-09-01

Kviečiai, rugiai ir jų miltai, kietieji kviečiai ir kietųjų kviečių kruopmilčiai. Kritimo skaičiaus nustatymas pagal Hagbergą ir Perteną. 1 keitinys (ISO 3093:2009/DAM 1:2026)

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN ISO 16484-3 Viešoji apklausa

Komentavimo iki data 2026-09-01

Pastatų automatizavimo ir valdymo sistemos. 3 dalis. Funkcijos (ISO/DIS 16484-3:2026)

ISO 16484-3:2005 specifies the requirements for the overall functionality and engineering services to achieve building automation and control systems. It defines terms, which shall be used for specifications and it gives guidelines for the functional documentation of project/application specific systems. It provides a sample template for documentation of plant/application specific functions, called BACS points list. The informative function block examples explain a method to display the referenced functions in system documentation; they do not standardize the method for programming functions and applications. ISO 16484-3:2005 covers requirements and definitions regarding BACS and application software, generic functions for plant/project specific applications and engineering functions for building controls and operations. It provides communication functions for the integration of other dedicated special system processes. ISO 16484-3:2005 defines a method for specifying the procurement specifications containing all essential elements required for the operational functioning of a BACS. The successful installation and operation of a BACS requires that its procurement be based on a complete and accurate functional specification.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN 304 623 V0.1.3 (2026-06) Viešoji apklausa

Komentavimo iki data 2026-08-31

Kibernetinis saugumas (CYBER). Kibernetinio atsparumo aktas (CRA). Kibernetinio saugumo reikalavimai, keliami sistemos paleidimo tvarkyklėms

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN 300 468 V1.20.0 (2026-06) Viešoji apklausa

Komentavimo iki data 2026-08-31

Digital Video Broadcasting (DVB); Specification for Service Information (SI) in DVB systems

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

ISO/IEC DIS 27004 Viešoji apklausa

Komentavimo iki data 2026-09-01

Informacinės technologijos. Saugumo metodai. Informacijos saugumo valdymas. Stebėsena, nustatymas, analizė ir įvertinimas

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

EN 61754-4-100:2016/prA1:2026 Naujas

Komentavimo iki data 2026-08-28

Skaiduliniai optiniai sujungimo įtaisai ir pasyvieji komponentai. Skaidulinių optinių jungčių sietuvai. 4-100 dalis. SC jungčių sistema. Supaprastintųjų lizdinių SC-PC jungčių sietuvai

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

EN 61754-6-100:2016/prA1:2026 Naujas

Komentavimo iki data 2026-08-28

Skaiduliniai optiniai sujungimo įtaisai ir pasyvieji komponentai. Skaidulinių optinių jungčių sietuvai. 6-100 dalis. MU jungčių šeima. Supaprastintųjų lizdinių MU-PC jungčių sietuvai. 1 keitinys

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN IEC 61300-2-29:2026 Naujas

Komentavimo iki data 2026-08-28

Skaiduliniai optiniai sujungimo įtaisai ir pasyvieji komponentai. Pagrindinės bandymų ir matavimų procedūros. 2-29 dalis. Bandymai. Žemaslėgis oras

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN ISO 19629 Archyvuotas

Komentavimo iki data 2026-08-27

Techninė keramika (modernioji keramika, modernioji techninė keramika). Termofizikinės keraminių kompozitų savybės. Vienmačio temperatūrinio laidžio nustatymas blyksnio metodu (ISO/DIS 19629:2026)

This document describes the flash method for the determination of thermal diffusivity of ceramic matrix composites with continuous fibre reinforcement. In order to conform with the unidimensional heat transfer hypothesis, the experimental conditions are defined such that the material behaves in a homogeneous manner. This involves performing tests in one symmetry axis of the composite. The method is applicable to materials which are physically and chemically stable during the measurement, and covers the range of temperature from 100 K to 2 800 K. It is suitable for the measurement of thermal diffusivity values in the range 10−4 m2∙s−1 to 10−7 m2∙s−1.

Peržiūrėti metaduomenis

prEN 3304 Archyvuotas

Komentavimo iki data 2026-08-27

Orlaiviai ir erdvėlaiviai. Anoduoti titano lydinio varžtai su 100° paslepiama sumažinta galvute su kryžmine išpjova paslinktomis atšakomis, normaliu griežtų leistinųjų nuokrypų strypu ir trumpu sriegiu; sutepti MoS2. Klasifikacija. 1 100 MPa (esant aplinkos temperatūrai) ir 315 °C

This document specifies the characteristics of screws, 100° countersunk reduced head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS2-lubricated. Classification: 1 100 MPa1/315 °C2.

Peržiūrėti metaduomenis

prEN 3037 Archyvuotas

Komentavimo iki data 2026-08-27

Orlaiviai ir erdvėlaiviai. Anoduoti titano lydinio varžtai su plokščia galvute, kryžmine išpjova paslinktomis atšakomis, normaliu griežtų leistinųjų nuokrypų strypu ir trumpu sriegiu; sutepti MoS2. Klasifikacija. 1 100 MPa (esant aplinkos temperatūrai) ir 315 °C

This document specifies the characteristics of screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated. Classification: 1 100 MPa1/315 °C2.

Peržiūrėti metaduomenis

prEN ISO 81060-2 Archyvuotas

Komentavimo iki data 2026-08-27

Neinvaziniai kraujospūdžio matuokliai. 2 dalis. Kartotinio automatizuoto matavimo tipo matuoklių klinikinis tyrimas (ISO/DIS 81060-2:2026)

This document specifies the requirements and methods for the clinical investigation of me equipment used for the intermittent non-invasive automated estimation of the arterial blood pressure by utilizing a cuff. This document is applicable to all sphygmomanometers that sense or display pulsations, flow or sounds for the estimation, display or recording of blood pressure. These sphygmomanometers need not have automatic cuff inflation. This document covers sphygmomanometers intended for use in all patient populations (e.g. all age and weight ranges), and all conditions of use (e.g. ambulatory blood pressure monitoring, stress testing blood pressure monitoring and blood pressure monitors for the home healthcare environment for self-measurement as well as use in a professional healthcare facility). EXAMPLE Automated sphygmomanometer as given in IEC 80601-2-30 undergoing clinical investigation according to this document. This document specifies additional disclosure requirements for the accompanying documents of sphygmomanometers that have passed a clinical investigation according to this document. This document is not applicable to clinical investigations of non-automated sphygmomanometers as given in ISO 81060-1 or invasive blood pressure monitoring equipment as given in IEC 60601-2-34. This document is not applicable to clinical investigations of a set of cuffs that are not of same materials and construction. Each type of cuff set is required to be evaluated separately according to this document.

Peržiūrėti metaduomenis

EN IEC 62271-202:2022/prA1:2026 Archyvuotas

Komentavimo iki data 2026-08-26

Aukštosios įtampos perjungimo ir valdymo įrenginiai. 202 dalis. Surenkamosios kintamosios srovės pastotės, skirtos didesnėms kaip 1 kV ir iki 52 kV imtinai vardinėms įtampoms

Peržiūrėti metaduomenis

prEN IEC 62149-13:2026 Archyvuotas

Komentavimo iki data 2026-08-26

Skaidulinės optikos aktyvieji komponentai ir įtaisai. Eksploatacinių charakteristikų standartai. 12 dalis. Eksploatacinių charakteristikų specifikacijos šablonas, skirtas kaupinimo lazerinio diodo moduliams

Peržiūrėti metaduomenis

prEN 14972-18 Archyvuotas

Komentavimo iki data 2026-08-25

Stacionariosios gaisro gesinimo sistemos. Vandens rūko sistemos. 18 dalis. Vietiniam naudojimui skirtų sistemų su atviraisiais purkštukais, kuriomis gesinami degiųjų skysčių gaisrai, bandymo protokolas

This document specifies the evaluation of the fire performance of water mist systems used for local application involving flammable liquid fires. The tests specified in this document are applicable to the following: a) flammable liquid pool fires where the liquid release can be confined to a bunded area, where the entire surface of the bunded area is protected by the water mist system; b) flammable liquid channel fires in channels not exceeding the maximum specified width of the water mist system and with no limited channel length; c) partially obstructed flammable liquid pool fires where the percentage of obstructed surface is limited to that tested; d) spray fires up to 6 MW fuelled by flammable liquids; e) spray and pool fire combinations where confined to a bunded area; f) flammable liquid residues (ink and paper dust) on printing presses.

Peržiūrėti metaduomenis

prEN 14972-21 Archyvuotas

Komentavimo iki data 2026-08-25

Stacionariosios gaisro gesinimo sistemos. Vandens rūko sistemos. 21 dalis. Gyvenamosioms patalpoms skirtų elektroniniu būdu valdomų kryptinių purkštukų bandymo protokolas

This document specifies fire testing requirements for water mist systems using wall mounted, electronically operated targeting nozzles for fire protection of domestic and residential occupancies up to a maximum ceiling height of 7,3 m. EXAMPLE Examples for residential occupancies are family dwelling/house, bed and breakfast, apartment buildings, blocks of flats, care homes, small hotels or hostels, and residential areas in hotel bedrooms and guest corridors. NOTE Some countries can have a national annex with guidance on the maximum height of the building, minimum design area and any additional requirements.

Peržiūrėti metaduomenis

prEN ISO 1628-2 Archyvuotas

Komentavimo iki data 2026-08-25

Plastikai. Praskiestų polimerų tirpalų klampos nustatymas kapiliariniais viskozimetrais. 2 dalis. Polivinilchloridinės dervos (ISO/DIS 1628-2:2026)

1.1 This document specifies conditions for the determination of the reduced viscosity (also known as viscosity number) and K-value of PVC resins. It is applicable to resins in powder form which consist of homopolymers of the monomer vinyl chloride and copolymers, terpolymers, etc., of vinyl chloride with one or more other monomers, but where vinyl chloride is the main constituent. The resins can contain small amounts of unpolymerized substances (e.g. emulsifying or suspending agents, catalyst residues, etc.) and other substances added during the course of the polymerization. This document is not applicable, however, to resins having a volatile-matter content in excess of 0,5 % ± 0,1 %, when determined in accordance with ISO 1269:2006. In addition to this, it is not applicable to resins which are not entirely soluble in cyclohexanone. 1.2 The reduced viscosity and K-value of a particular resin are related to its molecular mass, but the relationship varies depending on the concentration and type(s) of other monomer(s) present. Hence, homopolymers and copolymers having the same reduced viscosity or K-value can have different molecular masses. 1.3 The values determined for reduced viscosity and K-value, for a particular sample of PVC resin, are influenced differently by the concentration of the solution chosen for the determination. Hence the use of the procedures specified in this document only gives values for reduced viscosity and K-value that are comparable when the concentrations of the solutions used are identical. 1.4 The experimental procedures specified in this document can also be used to characterize the polymeric fraction obtained during the chemical analysis of a PVC composition. However, the values calculated for the reduced viscosity and K-value in these circumstances can deviate form the correct values for the resin used to produce the composition because of the impure nature of the recovered polymer fraction.

Peržiūrėti metaduomenis

prEN ISO 1628-5 Archyvuotas

Komentavimo iki data 2026-08-25

Plastikai. Praskiesto polimerų tirpalo klampos nustatymas kapiliariniais viskozimetrais. 5 dalis. Termoplastinių poliesterių (TP) homopolimerai ir kopolimerai (ISO/DIS 1628-5:2026)

This part of ISO 1628 specifies a method for the determination of the viscosity number (also referred to as "reduced viscosity") of dilute solutions of thermoplastic polyesters (TPs) in certain specified solvents. The method is applicable to poly(ethylene terephthalate) (PET), poly(butylene terephthalate) (PBT), poly-(cyclohexylenedimethylene terephthalate) (PCT), and poly(ethylene naphthalate) (PEN), as well as to copolyesters and other polyesters, referred to in ISO 20028-1:2019, that are soluble in one of the specified solvents under the specified conditions. The viscosity number is determined by the general procedure specified in ISO 1628-1:2024, observing the particular conditions specified in this part of ISO 1628. The determination of the viscosity number of a thermoplastic polyester provides a measure of the relative molecular mass of the polymer.

Peržiūrėti metaduomenis

prEN ISO 1628-3 Archyvuotas

Komentavimo iki data 2026-08-25

Plastikai. Praskiestų polimerų tirpalų klampos nustatymas kapiliariniais viskozimetrais. 3 dalis. Polietilenai ir polipropilenai (ISO/DIS 1628-3:2026)

This part of ISO 1628 defines particular conditions for determining the reduced viscosity (also known as viscosity number) and intrinsic viscosity of polyethylenes and polypropylenes at elevated temperatures (135 °C – 160 °C) in dilute solution. The viscosity of polymer solutions can be affected by fillers or additives present in the sample. The value of a reduced viscosity determined by this method can therefore be unreliable if the sample contains fillers or other additives. NOTE Reduced viscosity is also known as the Staudinger function ( Jv) and intrinsic viscosity as the Staudinger index ( Jg).

Peržiūrėti metaduomenis

prEN ISO 45001 Archyvuotas

Komentavimo iki data 2026-08-25

Darbuotojų sveikatos ir saugos vadybos sistemos. Reikalavimai ir taikymo nurodymai (ISO/DIS 45001:2026)

This document specifies requirements for an occupational health and safety (OH&S) management system, to enable organizations to provide safe and healthy workplaces by preventing work-related injury, and ill health, as well as by proactively improving its OH&S performance. This document is applicable to any organization that wishes to establish, implement and maintain an OH&S management system to improve OH&S, eliminate hazards, minimize OH&S risks, take advantage of OH&S opportunities, and address OH&S management system nonconformities associated with its activities and promote work-related well-being. This document helps an organization to achieve the intended results of its OH&S management system which include: a) continual improvement of OH&S performance; b) fulfilment of legal requirements and other requirements; c) achievement of OH&S objectives. This document is applicable to any organization regardless of its size, type and activities. It is applicable to the OH&S risks under the organization’s control, and OH&S opportunities, taking into account factors such as the context in which the organization operates and the needs and expectations of its workers and other interested parties. This document does not state specific criteria for OH&S performance, nor is it prescriptive about the design of an OH&S management system. This document does not address issues such as product safety, property damage or environmental impacts, beyond the OH&S risks to workers and other relevant interested parties. This document can be used in whole or in part to systematically improve occupational health and safety management. However, claims of conformity to this document are not acceptable unless all its requirements are incorporated into an organization’s OH&S management system and fulfilled without exclusion.

Peržiūrėti metaduomenis

ISO/DIS 9002 Archyvuotas

Komentavimo iki data 2026-08-24

Kokybės vadybos sistemos. ISO 9001 taikymo gairės

This document provides guidance on the intent of the requirements in ISO/DIS 9001 ISO 9001:2026, with examples of possible steps an organization can take to meet the requirements. It does not add to, subtract from, or in any way modify those requirements. This document does not prescribe mandatory approaches to implementation or provide any preferred method of interpretation.

Peržiūrėti metaduomenis

Išplėstinė paieška

Rezultatai

Greitieji filtrai

Organizacija

Technikos komitetas

ICS

Būtini slapukai

Statistikos slapukai

El. pašto prenumerata

Standartų projektų sąrašas

Išplėstinė paieška

Rezultatai

Greitieji filtrai

Organizacija

Technikos komitetas

ICS