Standartų projektų sąrašas | Standartų projektų portalas

GPDR

Privatumo politika

EN

Paieškos frazė

Išplėstinė paieška

Žymuo

Direktyvos

Organizacija

ICS

Technikos komitetas

Užsienio komitetas

Darbo grupė

Etapas

Būsena

Komentavimo data

iki

Rezultatai

Viso rasta įrašų: 268

1 … 2 3 4 5 6 … 11

prEN 1865-4 Viešoji apklausa

Komentavimo iki data 2026-07-30

Pacientų perkėlimo įranga, naudojama greitosios medicinos pagalbos automobiliuose. 4 dalis. Sulankstoma paciento pernešimo kėdė

This document specifies minimum requirements for the design and performance of foldable patient transfer chairs, which are used for the conveyance of patients to and/or from road ambulances. It aims to ensure patient safety and to minimize the physical effort required by staff operating the equipment.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN IEC 63567-4:2026 Viešoji apklausa

Komentavimo iki data 2026-07-29

Puslaidininkiniai įtaisai. Puslaidininkinių įtaisų gamybos komponentų ir tikrinimo įrangos eksploatacinių charakteristikų įvertinimas. 4 dalis. Lazerinio pjaustymo proceso matmenų tikslumo įvertinimo metodai

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN IEC 63168:2026 Viešoji apklausa

Komentavimo iki data 2026-07-29

Namų tinklo aplinkoje naudojamos sąveikiosios daugelio prietaisų sistemos. Su sauga susijusių elektroninių sistemų, skirtų aktyviam gyvenimui naudojant pagalbines priemones, funkcinės saugos reikalavimai

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN IEC 60335-2-39:2026/prA1:2026 Viešoji apklausa

Komentavimo iki data 2026-07-29

Buitiniai ir panašios paskirties elektriniai prietaisai. Sauga. 2-39 dalis. Ypatingieji reikalavimai, keliami komerciniams elektriniams daugiafunkciams maisto gaminimo prietaisams

This European Standard Deals with the safety of electrically operated commerical multi-purpose cooking pans not intended for household use. The rated voltage being not more than 250 V for single-phase appliances connected between one phase and neutral and 480 V for other appliances. Appliances within the scope of this standard are typically used in restaurants, canteens, hospitals, and commercial enterprises such as bakeries, butcheries, etc. The electrical part of appliances making use of other forms of energy is also within the scope of this standard.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN IEC 60335-2-37:2026/prAA:2026 Viešoji apklausa

Komentavimo iki data 2026-07-29

Buitiniai ir panašios paskirties elektriniai prietaisai. 2-37 dalis. Ypatingieji reikalavimai, keliami komerciniams elektriniams spurgų virimo aparatams ir gruzdintuvėms

This standard deals with the safety of electrically operated commercial deep fat fryers and doughnut fryers including pressurized types with a pressure not exceeding 50 kPa and a pressure volume litres product not exceeding 200, their rated voltage being not more than 250 V for single-phase appliances connected between one phase and neutral and 480 V for other appliances

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN IEC 60335-2-37:2026/prA1:2026 Viešoji apklausa

Komentavimo iki data 2026-07-29

Buitiniai ir panašios paskirties elektriniai prietaisai. 2-37 dalis. Ypatingieji reikalavimai, keliami komerciniams elektriniams spurgų virimo aparatams ir gruzdintuvėms

This standard deals with the safety of electrically operated commercial deep fat fryers and doughnut fryers including pressurized types with a pressure not exceeding 50 kPa and a pressure volume litres product not exceeding 200, their rated voltage being not more than 250 V for single-phase appliances connected between one phase and neutral and 480 V for other appliances

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN IEC 60335-2-39:2026/prAA:2026 Viešoji apklausa

Komentavimo iki data 2026-07-29

Buitiniai ir panašios paskirties elektriniai prietaisai. Sauga. 2-39 dalis. Ypatingieji reikalavimai, keliami komerciniams elektriniams daugiafunkciams maisto gaminimo prietaisams

This European Standard Deals with the safety of electrically operated commerical multi-purpose cooking pans not intended for household use. The rated voltage being not more than 250 V for single-phase appliances connected between one phase and neutral and 480 V for other appliances. Appliances within the scope of this standard are typically used in restaurants, canteens, hospitals, and commercial enterprises such as bakeries, butcheries, etc. The electrical part of appliances making use of other forms of energy is also within the scope of this standard.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

EN IEC 60335-2-36:2026/prAA:2026 Viešoji apklausa

Komentavimo iki data 2026-07-29

Buitiniai ir panašios paskirties elektriniai prietaisai. Sauga. 2-36 dalis. Ypatingieji reikalavimai, keliami komercinėms elektrinėms viryklėms, orkaitėms, kaitlentėms ir kaitlenčių elementams

This standard deals with the safety of electrically operated commercial cooking and baking ranges, ovens, hobs, hob elements and similar appliances, their rated voltage being not more than 250 V for single-phase appliances connected between one phase and neutral and 480 V for other appliances. These appliances are not intended for household and similar purposes. They are used for commercial processing of food in areas not open to the public, for example in kitchens of restaurants, canteens, hospitals and in commercial enterprises such as bakeries and butcheries. The electrical part of appliances making use of other forms of energy is also within the scope of this standard.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN IEC 60335-2-39:2026 Viešoji apklausa

Komentavimo iki data 2026-07-29

Buitiniai ir panašios paskirties elektriniai prietaisai. Sauga. 2-39 dalis. Ypatingieji reikalavimai, keliami komerciniams elektriniams daugiafunkciams maisto gaminimo prietaisams

This European Standard Deals with the safety of electrically operated commerical multi-purpose cooking pans not intended for household use. The rated voltage being not more than 250 V for single-phase appliances connected between one phase and neutral and 480 V for other appliances. Appliances within the scope of this standard are typically used in restaurants, canteens, hospitals, and commercial enterprises such as bakeries, butcheries, etc. The electrical part of appliances making use of other forms of energy is also within the scope of this standard.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN IEC 60335-2-37:2026 Viešoji apklausa

Komentavimo iki data 2026-07-29

Buitiniai ir panašios paskirties elektriniai prietaisai. 2-37 dalis. Ypatingieji reikalavimai, keliami komerciniams elektriniams spurgų virimo aparatams ir gruzdintuvėms

This standard deals with the safety of electrically operated commercial deep fat fryers and doughnut fryers including pressurized types with a pressure not exceeding 50 kPa and a pressure volume litres product not exceeding 200, their rated voltage being not more than 250 V for single-phase appliances connected between one phase and neutral and 480 V for other appliances

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN IEC 60335-2-36:2026/prA1:2026 Viešoji apklausa

Komentavimo iki data 2026-07-29

Buitiniai ir panašios paskirties elektriniai prietaisai. Sauga. 2-36 dalis. Ypatingieji reikalavimai, keliami komercinėms elektrinėms viryklėms, orkaitėms, kaitlentėms ir kaitlenčių elementams

This standard deals with the safety of electrically operated commercial cooking and baking ranges, ovens, hobs, hob elements and similar appliances, their rated voltage being not more than 250 V for single-phase appliances connected between one phase and neutral and 480 V for other appliances.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN IEC 60335-2-36:2026 Viešoji apklausa

Komentavimo iki data 2026-07-29

Buitiniai ir panašios paskirties elektriniai prietaisai. Sauga. 2-36 dalis. Ypatingieji reikalavimai, keliami komercinėms elektrinėms viryklėms, orkaitėms, kaitlentėms ir kaitlenčių elementams

This standard deals with the safety of electrically operated commercial cooking and baking ranges, ovens, hobs, hob elements and similar appliances, their rated voltage being not more than 250 V for single-phase appliances connected between one phase and neutral and 480 V for other appliances.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN 50549-10:2026 Viešoji apklausa

Komentavimo iki data 2026-07-29

Reikalavimai, keliami lygiagrečiai prie skirstomųjų tinklų jungiamoms elektrinėms. 10 dalis. Elektros energijos gamybos blokų atitikties vertinimo bandymai

The purpose of this document is to provide technical guidance for tests on generating units, interface protection and generating plant controller to evaluate their electrical characteristics. NOTE 1 Mechanical issues are taken into account as far as they influence the electrical characteristics. NOTE 2 Electrical energy storage systems (EESS) in meeting the conditions of 50549-1 and 50549-2 are considered as generating units. The evaluation results are intended to be used to demonstrate conformity of generating units, interface protection and generating plant controller to technical requirements for grid connection. In this context the evaluation results can also be used as part of a certification programme. NOTE 3 Besides the type test results of the generating units, interface protection and generating plant controller all additional elements for connection to the grid (e.g. transformer, cabling, multiple units) are considered in the evaluation of the final installation of a generating plant. The requirements intended to be evaluated are covered in the following standardization documents: - EN 50549-1:2019: Requirements for generating plants to be connected in parallel with distribution networks - Part 1: connection to a LV distribution network - Generating plants up to and including Type B - EN 50549-2:2019: Requirements for generating plants to be connected in parallel with distribution networks - Part 2: Connection to a MV distribution network - Generating plants up to and including Type B If grid connection requirements are dealt with in other documents or for other generating module types, where no specific testing procedure is provided, the testing methods described in this document can be used, if applicable. This document provides evaluation criteria for the conformity assessment of generating units with respect to the above mentioned standardization documents, based on type testing. However, some requirements are applicable on the generating plant level. The assessment of the conformity to these plant requirements is out of scope of this document. Nevertheless, this document can be used to show the capabilities of a generating unit to be used in a generating plant. As a consequence, it is possible that the conformity assessment of a generating unit does not cover all aspects of the above mentioned standardization documents, typically when a requirement is evaluated on plant level. Therefore, the conformity assessment report indicates clearly which clauses of this document are covered and which clauses are not covered. This document recognizes the existence of specific technical test requirements within several member states and these must be complied with.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

ISO/DIS 25261 Viešoji apklausa

Komentavimo iki data 2026-07-28

Prieskoniai ir pagardai. Nesmulkinta, pjaustyta ir malta citrinžolė. Specifikacija

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN ISO 7039 Viešoji apklausa

Komentavimo iki data 2026-07-28

Metalinės medžiagos. Tempimo bandymai. Medžiagų jautrumo aukšto slėgio dujų poveikiui tuščiaviduriuose bandiniuose įvertinimo metodas (ISO/DIS 7039:2026)

This document specifies the geometries and proposed finishing procedures of the inner surface of hollow test piece of metallic materials, filled with a high-pressure gaseous medium. The document specifies a tensile testing procedure to evaluate the effect of high-pressure gaseous medium compared to a high-pressure inert gas or air. The document can be used for the screening of metallic materials by evaluating mechanical property changes due to the effects of various test gases, including hydrogen. NOTE Temperature range and pressure range depend on the materials to be tested and test gas to be used.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN 13142 Viešoji apklausa

Komentavimo iki data 2026-07-28

Pastatų vėdinimas. Gyvenamųjų pastatų vėdinimui skirti komponentai ir gaminiai. Reikalaujamosios ir pasirenkamosios eksploatacinės charakteristikos

This document specifies and classifies the component/product performance characteristics, which may be necessary for the design, rating and dimensioning, placing on the market of residential ventilation products and systems to provide the predetermined performance, comfort conditions of temperature, air velocity, humidity, hygiene and sound in the occupied zone. It defines those performance characteristics (mandatory or optional) which are determined, measured and presented according to relevant test methods. It provides a classification scheme, which leads to a full definition of product properties based on test methods described in various European Standards, and gives an overview of the test standards. Distinction between mandatory and optional requirements is left to each European and national regulation(s). The codification part in Annex B and the classification part in Clause 8 apply to the following products: - unidirectional mechanical supply and exhaust residential ventilation units according to EN 13141-4:2021 and EN 13141-6:2014; - ducted mechanical bidirectional residential ventilation units according to EN 13141-7:2021; - non-ducted mechanical bidirectional residential ventilation units according to EN 13141-8:2022. This document does not apply to other products such as filters, fire dampers, ducts, control devices and sound attenuators, which may also be incorporated in residential ventilation. This document specifies in Annex ZA and Annex ZB the requirements of EU 1253/2014 and EU 1254/2014 for residential ventilation units below 1 000 m3/h air volume flow. This document does not cover requirements raised by European Directives (e.g. low voltage directive, EMC directive) and other requirements such as corrosion, reaction to fire and snow penetration.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN 40000-10 Viešoji apklausa

Komentavimo iki data 2026-07-28

Esminiai produktų kibernetinio saugumo reikalavimai. 10 dalis. Produktai su skaitmeniniais elementais, naudojami tapatybės duomenų valdymo sistemose ir programinėje bei aparatinėje įrangoje, įskaitant tapatumo nustatymo ir prieigos kontrolės skaitytuvus, taip pat ir biometrinius skaitytuvus

This project aims at covering the line 16 of the standardisation request and will provide: • General description of the Product with digital elements belonging to that category and the product and/or components such Product with digital elements may integrate, including – amongst other: o detailed description of that product category using in:  Identity management systems hardware and software are products with digital elements that provide mechanisms for identity lifecycle management, such as identity provisioning, maintenance, authentication, authorisation and deprovisioning, and including associated metadata.  Privileged access management hardware and software are products with digital elements that authenticate and authorise users or devices, granting or denying access to digital resources or to physical locations.  This category includes but is not limited to products (hardware, software and communication protocol) with digital elements that have the core functionality of either or both identity management and privileged access management; authentication and access control readers; biometric readers; single sign-on software; federated identity management software, protection and safety management (such as access control, intrusion alarm, CCTV and fire safety systems) and multi-factor authentication software. o Intended product purpose and reasonably foreseeable use in the above categories; o Identification of the various types of Products with digital elements; o Delineation and interplay with the following other categories of Product with digital elements (identified by their line in the standardization request):  line 17  line 18  line 20  line 24  line 28  line 29  line 32  line 35  line 37  line 38  line 39  line 41 • Description of their life cycle; • Relevance of cybersecurity essential requirements including the cybersecurity assessment requirements; • Definition of applicable risk profiles to be considered for these Product with digital elements; • Applicable cybersecurity requirements ensuring fulfillment of the essential requirements for each risk profile; • Applicable cybersecurity assessment requirements for each risk profile. A base document is provided • Defining the risk profiles; • Identifying initial cybersecurity security requirements.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN 40000-11 Viešoji apklausa

Komentavimo iki data 2026-07-28

Esminiai produktų kibernetinio saugumo reikalavimai. 11 dalis. Fizinį gaubtą turinti aparatinė įranga su apsauginiu korpusu, suprojektuota saugumo funkcijoms, tokioms kaip saugus duomenų saugojimas ir kriptografinės operacijos atviroje aplinkoje, atlikti

This document defines cyber security requirements for products with digital elements belonging to product category “Hardware Device with Security Boxes” (hereinafter called “Product” or “HWSB product”). The technical description of “Hardware Devices with Security Boxes” can be found in Annex II of [CRA]. The Hardware Devices with Security Boxes in scope are designed for deployment in a range of environments and where the threat landscape includes attackers with various attack potential. HWSB are hardware-based systems intended to provide secure storage, processing and use of sensitive data, including cryptographic assets, within a protected hardware boundary (envelope). This document applies to the HWSB part of the product. The applicability of this document to specific products is determined based on their intended purpose, use case and risk assessment.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN ISO 3630-7 Viešoji apklausa

Komentavimo iki data 2026-07-28

Odontologija. Endodontiniai instrumentai. 7 dalis. Ultragarsiniai instrumentų antgaliai (ISO/DIS 3630-7:2026)

This document is applicable to endodontic ultrasonic inserts, operated in combination with either air or electrically powered stand-alone handpieces or handpieces connecting to dental units. This document specifies requirements and test methods for inserts, and requirements for marking, labeling and packaging.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN ISO/IEC 19788-3 Viešoji apklausa

Komentavimo iki data 2026-07-28

Informacinės technologijos mokymuisi, ugdymui ir rengimui. Mokymosi išteklių metaduomenys. 3 dalis. Pagrindinis taikomųjų programų profilis (ISO/DIS 19788-3:2026)

The primary purpose of ISO/IEC 19788 is to specify metadata elements and their attributes for the description of learning resources. This includes the rules governing the identification of data elements and the specification of their attributes. ISO/IEC 19788 provides data elements for the description of learning resources and resources directly related to learning resources. ISO/IEC 19788-3:2011 is designed to help implementers with a starting point for adopting ISO/IEC 19788, defining an application profile that specifies, through adding constraints to the use of some data elements, how the ISO/IEC 19788-2 element set can be used.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN ISO 25237 Viešoji apklausa

Komentavimo iki data 2026-07-28

Sveikatos informatika. Pseudonimų suteikimas (ISO/DIS 25237:2026)

ISO 25237:2017 contains principles and requirements for privacy protection using pseudonymization services for the protection of personal health information. This document is applicable to organizations who wish to undertake pseudonymization processes for themselves or to organizations who make a claim of trustworthiness for operations engaged in pseudonymization services. ISO 25237:2017 - defines one basic concept for pseudonymization (see Clause 5), - defines one basic methodology for pseudonymization services including organizational, as well as technical aspects (see Clause 6), - specifies a policy framework and minimal requirements for controlled re-identification (see Clause 7), - gives an overview of different use cases for pseudonymization that can be both reversible and irreversible (see Annex A), - gives a guide to risk assessment for re-identification (see Annex B), - provides an example of a system that uses de-identification (see Annex C), - provides informative requirements to an interoperability to pseudonymization services (see Annex D), and - specifies a policy framework and minimal requirements for trustworthy practices for the operations of a pseudonymization service (see Annex E).

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN ISO 14111 Viešoji apklausa

Komentavimo iki data 2026-07-28

Gamtinės dujos. Metrologinės sieties gairės (ISO/DIS 14111:2026)

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

ISO/DIS 25608 Viešoji apklausa

Komentavimo iki data 2026-07-25

Sveikatos priežiūros organizacijų vadyba. Išmanosios ligoninės. Nešiojamiesiems įtaisams skirta tikralaikė vietos nustatymo sistema

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN IEC 62631-2-1:2026 Viešoji apklausa

Komentavimo iki data 2026-07-24

Kietųjų izoliacinių medžiagų dielektrinės ir varžinės savybės. 2-1 dalis. Santykinė dielektrinė skvarba ir sklaidos faktorius. Techniniai dažniai (0,1 Hz - 10 MHz). Kintamosios srovės metodai

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

ISO/DIS 14880-1 Viešoji apklausa

Komentavimo iki data 2026-07-23

Optika ir fotonika. Mikrolęšių matricos. 1 dalis. Aiškinamasis žodynas

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

Viso rasta įrašų: 268

1 … 2 3 4 5 6 … 11