Standartų projektų sąrašas

Paieškos frazė

Išplėstinė paieška

Žymuo

Direktyvos

Organizacija

ICS

Technikos komitetas

Užsienio komitetas

Darbo grupė

Etapas

Būsena

Komentavimo data

iki

Rezultatai

EN 302-8:2023/prA1 Viešoji apklausa

Komentavimo iki data 2025-12-16

Laikančiųjų medinių konstrukcijų klijai. Bandymo metodai. 8 dalis. Liestinio įtempimo bandinių su keliais klijų tarpsluoksniais bandymas statine apkrova

This document specifies a method of determining the ability of adhesive bonds to resist static load. It is applicable to adhesives used in load bearing timber structures. It is applicable for the following applications: a) for assessing the compliance of adhesives according to EN 301, EN 15425, EN 16254, EN 17334 and EN 17418; b) for assessing the suitability and quality of adhesives for load-bearing timber structures; c) for assessing the effect on the bond strength resulting from constant load at different climate conditions. This method is intended primarily to obtain performance data for the classification of adhesives for load bearing timber structures according to their suitability for use in defined climatic environments. This method is not intended to provide data for structural design and does not necessarily represent the performance of the bonded member in service.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

EN 15425:2023/prA1 Viešoji apklausa

Komentavimo iki data 2025-12-09

Klijai. Laikančiųjų medinių konstrukcijų vienkomponenčiai poliuretaniniai (PUR) klijai. Klasifikavimas ir eksploatacinių charakteristikų reikalavimai

This document establishes a classification for one component polyurethane (PUR) adhesives according to their suitability for use in load-bearing timber products in defined climatic exposure conditions, and specifies performance requirements for such adhesives for the factory manufacture or factory-like manufacturing of load-bearing timber products only. It also classifies “adhesive product lines” where all the products within the line have the same chemical composition except for a different amount of catalyst. This document only specifies the performance of adhesives for use in an environment corresponding to the defined conditions. The performance requirements of this document are applicable to the adhesives only, not to the manufactured timber products. This document does not cover the performance of adhesives for on-site gluing (except for factory-like conditions) or the production of wood-based panels, except solid wood panels, or modified and stabilized wood with considerably reduced swelling and shrinkage properties, e.g. acetylated wood, heat treated wood and polymer impregnated wood. This document is primarily intended for use by adhesive manufacturers and for use in timber products bonded with adhesives, to assess or control the quality of adhesives. The requirements are applicable to the type testing of the adhesives. Production control activities are outside the scope of this document. Adhesives meeting the requirements of this document are adequate for use in load-bearing timber products, provided that the bonding process has been carried out according to an appropriate product standard. This document does not address the classification and use of adhesives in combination with the spraying of water before or during the bonding process; see informative Annex C of this document. This does neither allow nor forbid the use of adhesives in combination with the spraying of water.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

EN 301:2023/prA1 Viešoji apklausa

Komentavimo iki data 2025-12-09

Fenoliniai ir aminoplastiniai laikančiųjų medinių konstrukcijų klijai. Klasifikavimas ir eksploatacinių charakteristikų reikalavimai

This document establishes a classification for phenolic and aminoplastic polycondensation adhesives according to their suitability for use for load-bearing timber products in defined climatic exposure conditions, and specifies performance requirements for such adhesives for the factory manufacture or factory-like manufacturing conditions of load-bearing timber products only. This document only specifies the performance of an adhesive for use in an environment corresponding to the defined conditions. The performance requirements of this document are applicable to the adhesive only, not to the manufacturing timber products. This document does not cover the performance of adhesives for on-site gluing (except for factory-like conditions) or the production of wood-based panels, except solid wood panels, or modified and stabilized wood with considerably reduced swelling and shrinkage properties, e.g. acetylated wood, heat treated wood and polymer impregnated wood. This document is primarily intended for use by adhesive manufacturers and for use in timber products bonded with adhesives, to assess or control the quality of adhesives. The requirements are applicable to the type testing of the adhesives. Production control activities are outside the scope of this document. Adhesives meeting the requirements of this document are adequate for use in load-bearing timber products, provided that the bonding process has been carried out according to an appropriate product standard.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

Būtini slapukai

Statistikos slapukai

El. pašto prenumerata

Išplėstinė paieška

Rezultatai

Greitieji filtrai

Organizacija

Technikos komitetas

ICS