Standartų projektų sąrašas

Paieškos frazė

Išplėstinė paieška

Žymuo

Direktyvos

Organizacija

ICS

Technikos komitetas

Užsienio komitetas

Darbo grupė

Etapas

Būsena

Komentavimo data

iki

Rezultatai

prEN 17777 Viešoji apklausa

Komentavimo iki data 2026-04-14

Organinės ir organinės-mineralinės trąšos. Tam tikrų elementų nustatymas

This document specifies references to the methods for the determination of the following specific elements in organic and organo-mineral fertilizers: Determination of the total phosphorus content; Determination of the total potassium content; Determination of the total calcium content; Determination of the total magnesium content; Determination of the total sodium content; Determination of the total sulphur content; Determination of the inorganic arsenic content; Determination of the cadmium content; Determination of the total chromium content; Determination of the total mercury content; Determination of the total nickel content; Determination of the total lead content; Determination of the total copper content; Determination of the total zinc content; Determination of the water-soluble calcium content; Determination of the water-soluble magnesium content; Determination of the water-soluble sodium content; Determination of the water-soluble sulphur content. This document specifies references to the methods for the determination of the following specific elements in organo-mineral fertilizers: Determination of the water-soluble phosphorus content; Determination of the water-soluble potassium content; Determination of the neutral ammonium citrate soluble phosphorus content Determination of the formic acid soluble phosphorus content; Determination of the total boron content; Determination of the total cobalt content; Determination of the total iron content Determination of the total manganese content Determination of the total molybdenum content; Determination of the water-soluble boron content; Determination of the water-soluble cobalt content; Determination of the water-soluble copper content; Determination of the water-soluble iron content; Determination of the water-soluble manganese content; Determination of the water-soluble molybdenum content; Determination of the water-soluble zinc content. The scope of the standards referenced in this document specifies in which cases the method is also applicable to blends.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN 17770 Viešoji apklausa

Komentavimo iki data 2026-03-31

Organinės ir organinės-mineralinės trąšos. Tam tikrų elementų visuminio kiekio nustatymas po skaidymo karališkuoju vandeniu atliekant induktyviai susietos plazmos atominę emisinę spektroskopiją (ICP-AES)

This document specifies a method for the determination of arsenic (As), cadmium (Cd), copper (Cu), chromium (Cr), lead (Pb), nickel (Ni)), boron (B), cobalt (Co), iron (Fe), manganese (Mn), molybdenum (Mo), zinc (Zn), phosphorus (P), potassium (K), magnesium (Mg), calcium (Ca), sulfur (S) and sodium (Na) in aqua regia digests of organic, organo-mineral fertilizers, and their fertilizing product blends using inductively coupled plasma-atomic emission spectrometry (ICP-AES). It is applicable and validated for several types of matrices as indicated in Annex A. This document is applicable to the component materials “by-products”, when used as components of fertilizing products, as well as the fertilizing products blends where a blend is a mix of at least two of the following components: fertilizers, liming materials, soil improvers, growing media, inhibitors, plant biostimulants, and where the following category: organic fertilizers, organo-mineral fertilizers is the highest % in the blend by mass or volume, or in the case of liquid form by dry mass. If the organic fertilizer or the organo-mineral fertilizer is not the highest % in the blend, the European Standard for the highest % of the blend applies. In case a fertilizing product blend is composed of components in equal quantity, the user decides which standard to apply. Variations in analytical methods for fertilizing product blends can lead to differing results as some components or matrix interactions can affect the outcome. Validation procedures have shown that developed standard methods are robust and reliable across diverse product compositions, but possible interferences and unexpected results when analysing fertilizing product blends are possible. This method is applicable to aqua regia digests prepared according to prEN 17768. NOTE Alternatively, inductively coupled plasma mass spectrometry (ICP-MS) can be used for the determination of the elements in the aqua regia digests if the user proves that the method gives the same results.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN 15475 Viešoji apklausa

Komentavimo iki data 2026-03-24

Neorganinės trąšos. Titrimetrinis amoniakinio azoto nustatymas

This document specifies a method for the titrimetric determination of the ammoniacal nitrogen content in inorganic fertilizers (including compound fertilizers), in which nitrogen is found exclusively either in the form of ammonium salts or ammonium salts together with nitrates. This document is applicable to the fertilizing products blends where a blend is a mix of at least two of the following components: fertilizers, liming materials, soil improvers, growing media, inhibitors, plant biostimulants and where the following category: inorganic fertilizers is the highest % in the blend by mass or volume, or in the case of liquid form by dry mass. If inorganic fertilizers are not the highest % in the blend, the European Standard for the highest % of the blend applies. In case a fertilizing product blend is composed of components in equal quantity, the user decides which standard to apply. Variations in analytical methods for fertilizing product blends can lead to differing results as some components or matrix interactions can affect the outcome. Validation procedures have shown that developed standard methods are robust and reliable across diverse product compositions, but possible interferences and unexpected results when analysing fertilizing product blends are possible. In the case of application to ammonium nitrate fertilizers of high nitrogen content, this document is not applicable to fertilizer product blends. This document is not applicable to fertilizers or fertilizer product blends containing urea, cyanamide, nutrient polymers or other organic nitrogenous compounds.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN 17776 Viešoji apklausa

Komentavimo iki data 2026-03-24

Organinės ir organinės-mineralinės trąšos. Visuminio organinės anglies kiekio nustatymas sausai deginant

This document specifies a method for the determination of total organic carbon (TOC) by elemental analysis using dry combustion. The method is applicable to organic and organo-mineral fertilizers containing more than 1 g carbon per kg of dry matter (0,1 %), with the exclusion of organo-mineral fertilizers containing urea-formaldehyde polymers or urea as long as there is no method available to assess carbon in urea-formaldehyde polymers or urea. This document is applicable to the component materials “by-products”, or “recovered high-purity materials”, when used as components of fertilizing products, as well as the fertilizing products blends where a blend is a mix of at least two of the following components: fertilizers, liming materials, soil improvers, growing media, inhibitors, plant biostimulants and where the following category: organic fertilizers, organo-mineral fertilizers is the highest % in the blend by mass or volume, or in the case of liquid form by dry mass. If the organic fertilizer or the organo-mineral fertilizer is not the highest % in the blend, the European Standard for the highest % of the blend applies. In case a fertilizing product blend is composed of components in equal quantity, the user decides which standard to apply. Variations in analytical methods for fertilizing product blends can lead to differing results as some components or matrix interactions can affect the outcome. Validation procedures have shown that developed standard methods are robust and reliable across diverse product compositions, but possible interferences and unexpected results when analysing fertilizing product blends are possible. This document is applicable and validated for several types of matrices as indicated in Annex B.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN 17773 Viešoji apklausa

Komentavimo iki data 2026-03-24

Organinės ir organinės-mineralinės trąšos. Sausosios medžiagos kiekio nustatymas

This document specifies the procedure for the determination and calculation of the dry matter content of organic and organo-mineral fertilizers for which the results of the performed analysis are to be calculated to the dry matter content basis. This document is applicable and validated for several types of matrices as indicated in Annex A. This document is applicable to the component materials “by-products”, “thermal oxidation materials and derivatives”, or “recovered high-purity materials”, when used as components of fertilizing products, as well as the fertilizing products blends where a blend is a mix of at least two of the following components: fertilizers, liming materials, soil improvers, growing media, inhibitors, plant biostimulants and where the following category organic fertilizers, organo-mineral fertilizers is the highest % in the blend by mass or volume, or in the case of liquid form by dry mass. If the organic fertilizer or the organo-mineral fertilizers is not the highest % in the blend, the European Standard for the highest % of the blend applies. In case a fertilizing product blend is composed of components in equal quantity, the user decides which standard to apply. Variations in analytical methods for fertilizing product blends can lead to differing results as some components or matrix interactions can affect the outcome. Validation procedures have shown that developed standard methods are robust and reliable across diverse product compositions, but possible interferences and unexpected results when analysing fertilizing product blends are possible.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN 17768 Viešoji apklausa

Komentavimo iki data 2026-03-24

Organinės ir organinės-mineralinės trąšos. Skaidymas karališkuoju vandeniu cheminiams elementams nustatyti

This document specifies the procedure for digestion of different organic and organo-mineral fertilizers with aqua regia to enable a subsequent determination of arsenic (As), cadmium (Cd), copper (Cu), chromium (Cr), lead (Pb), nickel (Ni), boron (B), cobalt (Co), iron (Fe), manganese (Mn), molybdenum (Mo), zinc (Zn), mercury (Hg), phosphorus (P), potassium (K), magnesium (Mg), calcium (Ca), sulfur (S) and sodium (Na)). This document is applicable to the component materials “by-products”, when used as components of fertilizing products, as well as the fertilizing products blends where a blend is a mix of at least two of the following components: fertilizers, liming materials, soil improvers, growing media, inhibitors, plant biostimulants, and where the following category: organic fertilizers, organo-mineral fertilizers is the highest % in the blend by mass or volume, or in the case of liquid form by dry mass. If the organic fertilizer or the organo-mineral fertilizer is not the highest % in the blend, the European Standard for the highest % of the blend applies. In case a fertilizing product blend is composed of components in equal quantity, the user decides which standard to apply. Variations in analytical methods for fertilizing product blends can lead to differing results as some components or matrix interactions can affect the outcome. Validation procedures have shown that developed standard methods are robust and reliable across diverse product compositions, but possible interferences and unexpected results when analysing fertilizing product blends are possible. The digests are suitable for analysis using prEN 17770 [11] and prEN 17769 [10]. This document is applicable and validated for several types of matrices as indicated in Annex A. NOTE 1 Digestates prepared by the procedure given in this document can also be applied for determination of other elements. NOTE 2 Alternatively, inductively coupled plasma mass spectrometry (ICP-MS) can be used for the measurement if the user proves that the method gives the same results.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN 17765 Viešoji apklausa

Komentavimo iki data 2026-03-24

Organinės ir organinės-mineralinės trąšos. Biureto kiekio nustatymas efektyviosios skysčių chromatografijos (HPLC) metodu

This document specifies a method for the determination of the biuret content by high-performance liquid chromatography (HPLC) with ultraviolet (UV) detector. This document is applicable to organic and organo-mineral fertilizers containing urea. This document is applicable to fertilizing products blends where a blend is a mix of at least two of the following products: fertilizers, liming materials, soil improvers, growing media, inhibitors, plant biostimulants and where organic matter is present in at least one of the products in the blend. In case a fertilizing product blend is composed only of inorganic products, the European Standard for inorganic fertilizers applies. Variations in analytical methods for fertilizing product blends can lead to differing results as some components or matrix interactions can affect the outcome. Validation procedures have shown that developed standard methods are robust and reliable across diverse product compositions, but possible interferences and unexpected results when analysing fertilizing product blends are possible. NOTE 1 This method was tested only for one fertilizing product blend during the inter-laboratory study. The product tested was a liquid organo-mineral mixture of a liquid organic fertilizer, a growing medium and a non-microbial plant biostimulant. NOTE 2 Nowadays, there is a method standardized as EN 15479 that allows the determination of biuret in urea by spectrophotometric detection. Organic and organo-mineral fertilizers contain organic matter and other compounds apart from urea that would interfere in a spectrophotometric method. HPLC allows an accurate determination of biuret by separating it from possible interfering compounds [2] [5].

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN ISO 15799 Viešoji apklausa

Komentavimo iki data 2026-03-03

Dirvožemio kokybė. Nurodymai dėl dirvožemio ir dirvožemio medžiagų ekotoksikologinio apibūdinimo (ISO/DIS 15799:2025)

This document is one of a family of International Standards providing guidance on soils and soil materials in relation to certain functions and uses including conservation of biodiversity. It applies in conjunction with these other standards. It provides guidance on the selection of experimental methods for the assessment of the ecotoxic potential of soils and soil materials (e.g. excavated and remediated soils, refills, embankments) with respect to their intended use and possible adverse effects on aquatic and soil dwelling organisms. NOTE This is a reflection of the maintenance of the habitat and retention function of the soil. In fact, the methods listed in this document are suitable for usage in a TRIAD approach, i.e. for an ecological assessment of potentially contaminated soils (see ISO 19204). This document does not cover tests for bioaccumulation. The ecological assessment of uncontaminated soils with a view to natural, agricultural or horticultural use is not within the scope of this document. Such soils can be of interest if they can serve as a reference for the assessment of soils from contaminated sites. The interpretation of results gained by applying the proposed methods is not in the scope of this document.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN ISO 21285 Viešoji apklausa

Komentavimo iki data 2026-03-03

Dirvožemio kokybė. Dirvožemio teršalų sukeltas dirvožemio erkių (Hypoaspis (Gaeolaelaps) aculeifer) dauginimosi slopinimas (ISO/DIS 21285:2025)

This document specifies a chronic test method for evaluating the habitat function of soils and determining effects of soil contaminants and substances on the reproduction of Hypoaspis aculeifer by ? mainly ? alimentary uptake. This method is applicable to soils and soil materials of unknown quality, e.g. from contaminated sites, amended soils, soils after remediation, industrial, agricultural or other sites under concern and waste materials (e.g. dredged material, municipal sludge from a wastewater treatment plant, composed material, or manure, especially those for possible land disposal). The reproduction (= number of juveniles) is the measured parameter of the test. The test reflects the bioavailability of a mixture of contaminants in natural soils (contaminated site soils) to a species which represents a trophic level which is not covered by other ISO standards. This test is not intended to replace the earthworm (see ISO 11268-2) or Collembola (see ISO 11267) reproduction tests since this species belongs not only to a different trophic group but also a different taxonomic group (= mites; i.e. arachnids) than those used usually. Effects of substances are assessed using a standard soil, preferably a defined artificial soil substrate. For contaminated soils, the effects are determined in the soil to be tested and in a control soil. Depending on the objective of the study, the control and dilution substrate (dilution series of contaminated soil) are either an uncontaminated soil comparable to the soil to be tested (reference soil) or a standard soil (e.g. artificial soil). This document provides information on how to use this method for testing samples (soils or substances) under temperate conditions. This document is not applicable to substances for which the air/soil partition coefficient is greater than one, or to substances with vapour pressure exceeding 300 Pa at 25 °C. NOTE The stability of the test substance cannot be ensured over the test period. No provision is made in the test method for monitoring the persistence of the substance under test.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN 15960 Viešoji apklausa

Komentavimo iki data 2026-02-24

Neorganinės trąšos. Visuminio kalcio, visuminio magnio, visuminio natrio ir visuminės sulfatų pavidalo sieros ekstrahavimas

This document specifies a method applicable to inorganic fertilizers for the extraction with diluted mineral acid of total calcium, total magnesium and total sodium and for the extraction of total sulfur present in the form of sulfates, so that the same extract may be used for the determination of each nutrient required.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

Būtini slapukai

Statistikos slapukai

El. pašto prenumerata

Išplėstinė paieška

Rezultatai

Greitieji filtrai

Organizacija

Technikos komitetas

ICS