Standartų projektų sąrašas

Paieškos frazė

Išplėstinė paieška

Žymuo

Direktyvos

Organizacija

ICS

Technikos komitetas

Užsienio komitetas

Darbo grupė

Etapas

Būsena

Komentavimo data

iki

Rezultatai

prEN ISO 12716 Viešoji apklausa

Komentavimo iki data 2025-08-12

Neardomieji bandymai. Bandymai akustine spinduliuote. Aiškinamasis žodynas (ISO/DIS 12716:2025)

This European Standard is concerned only with terms used specifically in acoustic emission testing (AT) and these fall into four parts: - terms relating to the physical phenomenon; - terms relating to the detection of the acoustic emission; - terms relating to the measured characteristics of the signal(s); - terms relating to acoustic emission applications.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN ISO 32679 Viešoji apklausa

Komentavimo iki data 2025-08-07

Neardomieji bandymai. Radiografinis tyrimas. Pramoninių radiografinių šaltinių matmenų nustatymas (ISO 32679:2024)

This document specifies a test procedure for determination of the size of industrial radiographic gamma sources of 0,5 mm or greater, made from the radionuclides Iridium 192, Ytterbium 169, Selenium 75 or Cobalt 60, by a radiography method with X-rays. The source size of a gamma radiation source is an important factor which affects the image quality of gamma ray images. The source size is determined with an accuracy of ±10 % but typically not better than ±0,1 mm. The source size is provided by the manufacturer as the mechanical dimension of the source insert. A measurement can be required if the manufacturing process is validated or monitored after implementation of the source into the holder. This document can be used for other radionuclides after validation. The standard test method ASTM E1114 provides further information on the measurement of the Ir-192 source size, the characterization of the source shape, and its correct assembly and packaging.

Peržiūrėti metaduomenis

prEN ISO 32543-1 Viešoji apklausa

Komentavimo iki data 2025-08-07

Neardomieji bandymai. Neardomuosiuose bandymuose naudojamų pramoninių rentgeno sistemų fokusavimo dėmių charakteristikos. 2 dalis. Radiografinis beobjektyvės kameros metodas (ISO 32543-1:2024)

This document specifies a method for the measurement of effective focal spot dimensions above 0,1 mm of X-ray systems up to and including 1 000 kV X-ray voltage by means of the pinhole camera method with digital evaluation. The tube voltage applied for this measurement is restricted to 200 kV for visual film evaluation and can be selected higher than 200 kV if digital detectors are used. The imaging quality and the resolution of X-ray images depend highly on the characteristics of the effective focal spot, in particular the size and the two-dimensional intensity distribution as seen from the detector plane. Compared to the other methods specified in the EN 12543 series and the ISO 32543 series, this method allows to obtain an image of the focal spot and to see the state of it (e.g. cratering of the anode). This test method provides instructions for determining the effective size (dimensions) of standard (macro focal spots) and mini focal spots of industrial X-ray tubes. This determination is based on the measurement of an image of a focal spot that has been radiographically recorded with a “pinhole” technique and evaluated with a digital method. For the characterization of commercial X-ray tube types (i.e. for advertising or trade), the specific FS (focal spot) values of Annex A can be used.

Peržiūrėti metaduomenis

prEN ISO 15548-1 Viešoji apklausa

Komentavimo iki data 2025-08-07

Neardomieji bandymai. Tyrimo sūkurinėmis srovėmis įranga. 1 dalis. Matuoklio charakteristikos ir patikra (ISO/DIS 15548-1:2025)

ISO 15548-1:2013 identifies the functional characteristics of a general-purpose eddy current instrument and provides methods for their measurement and verification. The evaluation of these characteristics permits a well-defined description and comparability of eddy current equipment. By careful choice of the characteristics, a consistent and effective eddy current examination system can be designed for a specific application. Where accessories are used, these are characterized using the principles of ISO 15548-1:2013. ISO 15548-1:2013 gives neither the extent of verification nor acceptance criteria for the characteristics. They are given in the application documents.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN ISO 18490 Viešoji apklausa

Komentavimo iki data 2025-07-03

Neardomieji bandymai. Neardomųjų bandymų personalo regos aštrumo įvertinimas (ISO/DIS 18490:2025)

ISO 18490:2015 specifies the form of the optotype, the quality requirements for the chart, the test procedure, and the acceptance level for near vision acuity of NDT personnel. It also addresses the qualification requirements for personnel permitted to carry out the test. ISO 18490:2015 only addresses near vision acuity under defined conditions similar to those encountered during routine NDT inspection. It does not address an individual's overall visual acuity and users are advised to consider the need for a general eye examination by specialist medical personnel to ensure general vision acuity is appropriate for job function. ISO 18490:2015 does not address colour vision requirements.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

Būtini slapukai

Statistikos slapukai

El. pašto prenumerata

Išplėstinė paieška

Rezultatai

Greitieji filtrai

Organizacija

Technikos komitetas

ICS