Standartų projektų sąrašas

prEN 15383 Archyvuotas

Komentavimo iki data 2026-02-17

Nuotakyno plastikinių vamzdžių sistemos. Termoreaktyvieji stiklo plastikai poliesterinių dervų pagrindu. Šuliniai ir apžiūros šulinėliai

This document applies to: a) manholes, when made from glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP); b) inspection chambers, when made from glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP) which are intended to be used with inverts which are at a depth not exceeding 2 m. These products are intended to be used within a drain or sewer system operating without pressure or occasionally at a head of pressure up to 1 bar. It applies to products, and their joints, intended for use in buried installations and to be installed by open-trench techniques. The units have a circular shape with nominal sizes as specified in EN ISO 23856. The intended use of these products is to provide access to, buried drain or sewer systems for the conveyance of waste water at temperatures up to 50 °C, without pressure or occasionally at a head of pressure up to 1 bar, outside buildings and installed in areas subjected to vehicle and/or pedestrian traffic. It specifies definitions including symbols, requirements and characteristics of manholes, inspection chambers, joints, materials, test methods and marking. NOTE It is the responsibility of the purchaser or specifier to make the appropriate selections, taking into account their particular requirements and any relevant national regulations and installation practices or codes.

Peržiūrėti metaduomenis

prEN 17732 Archyvuotas

Komentavimo iki data 2026-02-17

Dirvožemio gerinimo medžiagos ir auginimo terpės. Terminija

This document specifies terminology for soil improvers and growing media. Annex A contains an overview of all terms defined in this document in alphabetical order.

Peržiūrėti metaduomenis

prEN 17733 Archyvuotas

Komentavimo iki data 2026-02-17

Dirvožemio gerinimo medžiagos ir auginimo terpės. Ėminių ėmimo ir ruošimo metodai

This document specifies references to methods for sampling of soil improvers and growing media and sample preparation of soil improvers and growing media for subsequent determination of quality and quantity. This document is applicable to the fertilizing product blends where a blend is a mix of two or more fertilising products belonging to the categories of fertilizers, liming material, soil improvers, growing media, inhibitors and plant biostimulants, and where soil improvers and/or growing media are the components with the highest percentage in the blend by mass or volume, or in the case of products in liquid form by dry mass. If the soil improvers and/or growing media are not the components with the highest percentage in the blend, the European Standard relevant to the component with the highest percentage in the blend applies. In case a blend is composed of fertilising products mixed in equal quantities, the user of the standard decides which standard to apply. NOTE A soil improver or a growing medium consists of a single bulky (volume-building) component or a mix of bulky (volume-building) components (for example peat, wood fibres, coconut coir, compost, expanded perlite).

Peržiūrėti metaduomenis

prEN ISO 24882 Archyvuotas

Komentavimo iki data 2026-02-17

Žemės ūkio mašino, traktoriai ir žemės darbų mašinos. Gaminio kibernetinė sauga (ISO/DIS 24882:2025)

This document specifies engineering requirements for cybersecurity risk assessment regarding concept, product development, production, operation, maintenance and decommissioning of electrical and electronic (E/E) systems in Agricultural Machinery & Tractors, including their components and interfaces. A framework is defined that includes requirements for cybersecurity processes and a common language for communicating and managing cybersecurity risk.

Peržiūrėti metaduomenis

prEN ISO 10993-16 Archyvuotas

Komentavimo iki data 2026-02-17

Biologinis medicinos priemonių įvertinimas. 16 dalis. Irimo produktų ir išplaunamųjų medžiagų toksikokinetinis įvertinimas (ISO/DIS 10993-16:2025)

ISO 10993-16:2017 provides principles on designing and performing toxicokinetic evaluation relevant to medical devices. Annex A describes the considerations for inclusion of toxicokinetic evaluation in the biological evaluation of medical devices.

Peržiūrėti metaduomenis

prEN 304 113 V1.0.0 (2025-12) Archyvuotas

Komentavimo iki data 2026-02-15

Maritime satellite Emergency Position Indicating Radio Beacons (EPIRBs) for non-SOLAS vessels; Technical characteristics and methods of measurement

Peržiūrėti metaduomenis

ISO/IEC DIS 27091 Archyvuotas

Komentavimo iki data 2026-02-09

Kibernetinis saugumas ir privatumas. Dirbtinis intelektas. Privatumo apsauga

Peržiūrėti metaduomenis

EN 13480-5:2024/prA1 Archyvuotas

Komentavimo iki data 2026-02-15

Metaliniai pramoniniai vamzdynai. 5 dalis. Tikrinimas ir bandymas

This Part of this European Standard specifies the requirements for inspection and testing of industrial piping as defined in EN 13480-1:2017 to be performed on individual spools or piping systems, including supports, designed in accordance with EN 13480-3:2017 and EN 13480-6:2017 (if applicable), and fabricated and installed in accordance with EN 13480-4:2017.

Peržiūrėti metaduomenis

ISO/DIS 37200 Archyvuotas

Komentavimo iki data 2026-02-09

Šiuolaikinės vergovės rizikos valdymas. Nurodymai dėl prekybos žmonėmis ir priverstinio darbo prevencijos, nustatymo ir atsako į juos

Peržiūrėti metaduomenis

prEN 50749-1:2025 Archyvuotas

Komentavimo iki data 2026-02-15

Pavojaus signalizavimo sistemos. Įspėjimo apie pavojų sistemos. 1 dalis. Gyvenamuosiuose pastatuose naudojamos įspėjimo apie pavojų sistemos. Sistemai keliami reikalavimai

This document applies to the planning, installation, operation, and maintenance of hazard warning systems (HWS) for use in residential buildings, flats, and rooms with flat-like use. It also specifies basic requirements and provisions for reliable interconnection of safety and security technology with smart home systems or active assisted living (AAL) systems and applications. Furthermore, it describes basic requirements for devices and systems or references to respective standards and specifications. This document does not override or in any way limit existing European standards. Hazard warning systems are used for early warning of persons to avoid or reduce personal injury and damage to property, which can result from intrusion, hold-up, fire, dangerous gases, and water ingress as well as technical defects of building services. HWS can also be used in residential properties in the event of duress/harassment and, for communication with persons in emergency situations who are present in the property covered by the HWS or to initiate controls in building services because of the aforementioned events. HWS can be designed in compliance with this standard as a self-contained system, or as HWS with connection of Smart Home components, or as a HWS that is a Smart Home system with integrated security applications. For the purposes of this document, the term “smart home” includes all networked systems and or web-based technical processes or IoT devices that are used in residential properties. This includes also, for example, remotely controllable devices such as cameras, entertainment electronics, household appliances, heating, air conditioning, ventilation (HVAC), electrical control components, door/gate/window openings and others. For the purposes of this document, AAL systems are assistance systems that support everyday life and are usually used in combination with services to provide needs-based support in the home environment for people with special needs. In most cases, AAL systems are web- or IoT-based. AAL systems and components are tailored to the individual needs of their users and their living environment and are networked with the building technology and security technology (in this case the HWS) for safety reasons to provide the user with the best possible support to make sure they react appropriately and in time to the situation in the event of an emergency. The task of AAL systems often includes recognizing critical health conditions of their users and initiating appropriate measures. For the purposes of this document, the term networking also means any integration of systems into the HWS and in many cases the connection to smart devices (e.g. smartphone, tablet, PC) via the Internet in conjunction with a specific application software (app). This standard can also be applied when systems are connected to the HWS and themselves use a connection to the Internet to outsource functional intelligence and utilize opportunities to automate processes across application areas, which can be either local, remote or a combination. Any notification or change in status of the HWS or its components can optionally be sent to other persons present in the building and/or to other locations/systems (e.g. emergency call centres [ERC]).

Peržiūrėti metaduomenis

prEN 303 940-1 V1.1.0 (2025-11) Archyvuotas

Komentavimo iki data 2026-02-08

Trumpojo nuotolio įtaisai, naudojantys ultraplačios juostos (UWB) technologiją. Prieigos prie radijo ryšio spektro darnusis standartas. 1 dalis. Patalpose naudojami milimetrinių bangų kūno skeneriai, veikiantys nuo 69,8 GHz iki 80,5 GHz dažnių juostoje

Peržiūrėti metaduomenis

prEN 302 065-2-5 V1.1.0 (2025-11) Archyvuotas

Komentavimo iki data 2026-02-08

Trumpojo nuotolio įtaisai, naudojantys ultraplačios juostos (UWB) technologiją. Prieigos prie radijo ryšio spektro darnusis standartas. 2 dalis. Buvimo vietos sekimo ultraplačios juostos įtaisai. 5 podalis. Reikalavimai, keliami nuo 6,0 GHz iki 8,5 GHz dažnių juostose veikiantiems patobulintiesiems patalpų įtaisams

Peržiūrėti metaduomenis

Išplėstinė paieška

Rezultatai

Greitieji filtrai

Organizacija

Technikos komitetas

ICS

Būtini slapukai

Statistikos slapukai

El. pašto prenumerata

Standartų projektų sąrašas

Išplėstinė paieška

Rezultatai

Greitieji filtrai

Organizacija

Technikos komitetas

ICS