GDPR

projektai-lsd Lithuanian Standards Board
Portal for draft standards

Extended search

till

Results

Showing:
Total records found: 291
arrow-prev 1 10 11 12
prEN 16230-1 Public enquiry
Comment end date 2026-08-20
Leisure karts - Part 1: Safety requirements and test methods for karts

This document is applicable for karts that are not intended to be used on public roads. This document applies to: - leisure karts only; - karts propelled by a combustion engine, including LPG combustion engines; - karts propelled by an electric powertrain where the working voltage is below 30 V AC rms and 60 V DC. The traction battery is a Li-ion battery or a lead acid battery; - karts used on indoor and outdoor tracks, permanent or temporary; - karts used on supervised tracks designed for leisure karting, with a sealed ground (such as asphalt, concrete, ice or snow). This document does not apply to: - karts used for competition organized by and under the responsibility of the CIK-FIA and/or ASN, ensuring through the granting of licenses by an ASN or one of its affiliated members as defined in the International Sporting code, compliance with the safety, sporting, disciplinary and technical rules of the CIAK-FIA and/ or ASN; - karts designed exclusively for competition and toys; - cross country karts; - karts with two or more seats; - karts used on tracks not mentioned above (such as mud, earth); - karts used in amusement parks (refer to EN 13814-1:2019+A1:2024 [1] for these installations). The requirements related to the hazards of swappable battery propulsion systems are not covered in this document. The requirements related to whole-body vibration are not covered in this document. This document specifies appropriate measures to eliminate or reduce the risks arising from significant hazards, hazardous situations and events (see Clause 6) during operation and maintenance of the karts, when carried out as intended by the manufacturer. Safety in karting activities is dependent on a correct interaction between leisure karts and the track equipment and facilities. General recommendations for tracks to be used for leisure karting are included in this part of the standard. This document is not applicable to karts that are manufactured before the date of publication of this document by CEN. NOTE Specific requirements for tracks design and operation will be included in a future Part 2 of this standard.

prEN ISO/IEC 29100 Public enquiry
Comment end date 2026-09-04
Information technology - Security techniques - Privacy framework (ISO/IEC 29100:2024)

This document provides a privacy framework which: — specifies a common privacy terminology; — defines the actors and their roles in processing personally identifiable information (PII); — describes privacy safeguarding considerations; — provides references to known privacy principles for information technology. This document is applicable to natural persons and organizations involved in specifying, procuring, architecting, designing, developing, testing, maintaining, administering, and operating information and communication technology systems or services where privacy controls are required for the processing of PII

prEN 16264 Public enquiry
Comment end date 2026-09-10
Pyrotechnic articles - Other pyrotechnic articles - Cartridges for powder actuated tools

This document defines the procedures for classifying, testing and labelling of cartridges for powder actuated tools (PAT cartridges), as defined in Clause 3 of this document. This document applies to PAT cartridges which are all classified as P1. This document does not apply to pyrotechnic articles containing blasting agents and military explosives except black powder and flash composition. PAT cartridges contain pyrotechnic composition(s) delivering mainly gases, intended to propel a piston. The piston propels fasteners (e.g. nails) or drives hard marking characters into appropriate materials. This document also applies to PAT cartridges sold to persons younger than 18 years, if this is permitted by the Member State due to the low hazard of the PAT cartridges. NOTE PAT cartridges can also be used for hard marking tools. Information on cartridge operated fixing and hard marking tools can be found in EN 15895:2025 [1]. This document applies to the cartridges listed in Table 1. Table 1 — Lists of the established calibres for PAT cartridges

prEN 319 412-2 V2.5.0 (2026-05) Archived
Comment end date 2026-07-20
Electronic Signatures and Trust Infrastructures (ESI); Certificate Profiles; Part 2: Certificate profile for certificates issued to natural persons
prEN IEC 62631-2-1:2026 Public enquiry
Comment end date 2026-07-24
Dielectric and resistive properties of solid insulating materials - Part 2-1: Relative permittivity and dissipation factor - Technical frequencies (0,1 Hz - 10 MHz) - AC Methods
EN 1993-1-9:2025/prA1 Public enquiry
Comment end date 2026-07-30
Eurocode 3 - Design of steel structures - Part 1-9: Fatigue

1.1 Scope of EN 1993-1-9 (1) EN 1993-1-9 gives design methods for the verification of the fatigue design situation of steel structures. NOTE Steel structures consist of members and their joints. Each member and joint can be represented as a constructional detail or as several of the latter. (2) Design methods other than the stress-based methods, such as the notch strain method or fracture mechanics methods, are not covered by EN 1993-1-9. (3) EN 1993-1-9 only applies to structures made of all grades of structural steels and products within the scope of EN 1993-1 (all parts), in accordance with the provisions noted in the detail category tables or annexes. (4) EN 1993-1-9 only applies to structures where execution conforms to EN 1090-2. NOTE Supplementary execution requirements are indicated in the detail category tables. (5) EN 1993-1-9 applies to structures operating under normal atmospheric conditions and with sufficient corrosion protection and regular maintenance. The effect of seawater corrosion is not covered. (6) EN 1993-1-9 applies to structures with hot dip galvanizing in accordance with the provisions noted in the detail category tables or annexes. (7) Microstructural damage from high temperature (> 150°C) that occurs during the design service life is not covered. (8) EN 1993-1-9 gives guidance of how to consider post-fabrication treatments that are intended to improve the fatigue resistance of constructional details. 1.2 Assumptions (1) Unless specifically stated, EN 1990, EN 1991 (all parts) and EN 1993 1 (all parts) apply. (2) The design methods given in EN 1993-1-9 are applicable if: - the execution quality is as specified in EN 1090-2, and - the construction materials and products used are as specified in the relevant parts on EN 1993 (all parts), or in the relevant material and product specifications. (3) The design methods of EN 1993-1-9 are generally derived from fatigue tests on constructional details with large scale specimens that include effects of geometrical and structural imperfections from material production and execution (e.g. the effects of tolerances and residual stresses from welding).

ISO/DIS 25459 Public enquiry
Comment end date 2026-08-09
In vitro diagnostic medical devices — Requirements for determining commutability of certified reference materials used as secondary calibrators or trueness controls
prEN IEC 60645-5:2026 Public enquiry
Comment end date 2026-09-09
Electroacoustics - Audiometric equipment - Part 5: Instruments for the measurement of aural acoustic impedance/admittance
prEN ISO 14159 Public enquiry
Comment end date 2026-09-15
Safety of machinery - General requirements for hygienic design (ISO/DIS 14159:2026)

This International Standard specifies hygiene requirements of machines and provides information for the intended use to be provided by the manufacturer. It applies to all types of machines and associated equipment used in applications where hygiene risks to the consumer of the product can occur. This International Standard does not cover requirements relative to the uncontrolled egress of microbiological agents from the machine.

EN 12209:2024/prA1 Archived
Comment end date 2026-07-14
Building hardware - Mechanically operated locks and locking plates - Characteristics and test methods

This document specifies product characteristics and test methods of mechanically operated locks and their locking plates. This document covers mechanically operated locks and their locking plates which are either manufactured and placed on the market in their entirety by one producer or assembled from sub-assemblies produced by more than one producer and designed to be used in combination. This document does not cover assessment of the contribution of the product to the fire resistance of specific fire resistance and/or smoke control door set assemblies. This document is not applicable to mechanically/electromechanically cylinders, handles, locks for windows, padlocks, locks for safes, furniture locks or prison locks. This document does not specify mechanically operated multipoint locks and their locking plates which are specified by EN 15685.

prEN 1865-3 Public enquiry
Comment end date 2026-07-30
Patient handling equipment used in ambulances - Part 3: Heavy duty stretcher

This document specifies minimum requirements for the design and performance of heavy duty stretchers used in road ambulances for the treatment and transportation of patients. It aims to ensure patient safety and minimize the physical effort required by staff operating the equipment.

EN 1998-4:2025/prA1 Public enquiry
Comment end date 2026-08-13
Eurocode 8 - Design of structures for earthquake resistance - Part 4: Silos, tanks, pipelines, towers, masts and chimneys

EN 1998-4 is applicable to the seismic design of on-ground and elevated silos, on-ground, elevated and underground tanks, above-ground and buried pipeline systems, towers, masts and chimneys and ancillary elements attached to the aforementioned structures or in industrial facilities.

prEN ISO 1628-3 Public enquiry
Comment end date 2026-08-25
Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 3: Polyethylenes and polypropylenes (ISO/DIS 1628-3:2026)

This part of ISO 1628 defines particular conditions for determining the reduced viscosity (also known as viscosity number) and intrinsic viscosity of polyethylenes and polypropylenes at elevated temperatures (135 °C – 160 °C) in dilute solution. The viscosity of polymer solutions can be affected by fillers or additives present in the sample. The value of a reduced viscosity determined by this method can therefore be unreliable if the sample contains fillers or other additives. NOTE Reduced viscosity is also known as the Staudinger function ( Jv) and intrinsic viscosity as the Staudinger index ( Jg).

prEN ISO 13606-1 Public enquiry
Comment end date 2026-09-01
Health informatics - Electronic health record communication - Part 1: Reference model (ISO/DIS 13606-1:2026)

This document specifies a means for communicating part or all of the electronic health record (EHR) of one or more identified subjects of care between EHR systems, or between EHR systems and a centralised EHR data repository. It can also be used for EHR communication between an EHR system or repository and clinical applications or middleware components (such as decision support components), or personal health applications and devices, that need to access or provide EHR data, or as the representation of EHR data within a distributed (federated) record system. This document will predominantly be used to support the direct care given to identifiable individuals or self-care by individuals themselves, or to support population monitoring systems such as disease registries and public health surveillance. Uses of health records for other purposes such as teaching, clinical audit, administration and reporting, service management, research and epidemiology, which often require anonymization or aggregation of individual records, are not the focus of this document but such secondary uses might also find the document useful. This Part 1 of the multipart series is an Information Viewpoint specification as defined by the Open Distributed Processing ? Reference model: Overview (ISO/IEC 10746-1). This document is not intended to specify the internal architecture or database design of EHR systems.

prEN 18372 Public enquiry
Comment end date 2026-09-15
Materials and articles in contact with foodstuffs — Evaluation of the suitability of metal and alloy articles in contact with foodstuffs during microwave heating

This document establishes a methodology framework for testing metal-made articles in contact with foodstuffs for use in domestic microwave applicators. An experimental method aiming at qualifying this class of articles is proposed. The objectives of the method are two-folds: ensuring a correct eating efficiency considering a standard microwave heating cycle and guarantying the user safety notably regarding the risk of electrical discharge.

ISO/DIS 25268 Public enquiry
Comment end date 2026-07-22
Guidelines for hospital internal logistics services using autonomous mobile robots for the delivery of pharmaceuticals
Total records found: 291
arrow-prev 1 10 11 12

Quick filters

Technical Committee
TK 1 Electronics (13) TK 4 Information technology (8) TK 5 Electrical engineering (45) TK 6 Fruit and vegetables products (2) TK 12 Motor - roads (2) TK 13 Agricultural engineering (9) TK 15 Cereals, cereal products, bread and animal feeding stuffs (1) TK 18 Telecommunications (12) TK 20 Toys, child use articles, sports and other recreational equipment (2) TK 22 Fire safety (5) TK 23 Ceramic tiles, masonry and natural stones (3) TK 24 Quality management and quality assurance (2) TK 25 Matrix, gypsum and gypsum based products (1) TK 28 Gas systems (2) TK 29 Water supply (2) TK 31 Acoustics (1) TK 32 Health (10) TK 35 Safety of machinery (4) TK 36 Environmental protection (3) TK 38 Building constructions (13) TK 39 Protection (1) TK 40 Petroleuml, petroleum products, lubricants and alternative fuels (1) TK 41 Welding (2) TK 42 Packaging (1) TK 45 Electric power (5) TK 46 Roofs and building waterproof isolation (1) TK 49 Metallic materials (2) TK 50 Heating and Ventilation Systems (2) TK 51 Food analysis- Horizontal methods (4) TK 52 Ophthalmic optics and lasers (4) TK 54 Assistive products for persons with disability (2) TK 57 Fertilizers (3) TK 59 Geotechnics (1) TK 60 Windows and doors (2) TK 63 Gas cylinders and cryogenic vessels (1) TK 66 Non-destructive testing (1) TK 68 Plastics (7) TK 70 Pulp, paper, board, adhesives (4) TK 76 Explosive atmospheres (1) TK 79 IT security techniques (15) TK 80 Road transport and traffic telematics (3) TK 82 Safety of trackless overground vehicles (2) TK 87 Biotechnology (1) TK 88 Building Information Modelling (BIM) (2) TK 89 Risk management and organizational governance (1) TK 99 Health Informatics (3)
ICS
Plonasis popierius (1) Biologinės dirvožemio savybės (1) Advanced ceramics (5) Aerospace electric equipment and systems (4) Alarm and warning systems (1) Alkaline secondary cells and batteries (1) Aluminium products (1) Application of information technology in general (2) Binders. Sealing materials (1) Biology. Botany. Zoology (1) Bolts, screws, studs (1) Bolts, screws, studs (4) Bridge construction (1) Building accessories (2) Buildings in general (1) Cables (1) Car informatics. On board computer systems (1) Cement. Gypsum. Lime. Mortar (4) Cereals, pulses and derived products (1) Chemical laboratories. Laboratory equipment (1) Company organization and management in general (1) Concrete structures (2) Cooking ranges, working tables, ovens and similar appliances (20) Dental instruments (1) Dental materials (2) Dentistry in general (1) Dishwashers (1) Domestic electrical appliances in general (3) Earth-moving machinery (1) Earthworks. Excavations. Foundation construction. Underground works (2) Electric road vehicles (1) Electric tools (3) Electric traction equipment (1) Electrical accessories in general (1) Electrical and electronic equipment (1) Electrical apparatus for explosive atmospheres (1) Electrical equipment of ships and of marine structure (1) Electricity supply systems (2) Electroacoustics (1) Electronics (Vocabularies) (2) Emission (4) Environment. Health protection. Safety (Vocabularies) (1) Environmental testing (1) Equipment for children (2) Explosives. Pyrotechnics and fireworks (3) Fibre optic interconnecting devices (4) Fibre optic systems in general (1) Fire protection (3) Fire-resistance of building materials and elements (2) First aid (3) Fixed capacitors (1) Flat steel products and semi-products (2) Food microbiology (1) Gas cylinders (1) Generators (1) Health care services in general (1) High voltage switchgear and controlgear (1) Hospital equipment (1) Identification cards. Chip cards. Biometrics (1) Immunity (1) Implants for surgery, prosthetics and orthotics (1) In vitro diagnostic test systems (3) Industrial automation systems in general (1) Industrial robots. Manipulators (1) Industrial trucks (1) Inland navigation vessels (1) Insulating materials in general (2) Iron and steel forgings (1) IT applications in education (1) IT applications in health care technology (2) IT applications in office work (1) IT applications in transport (2) IT Security (19) Kitchen furniture (3) Laundry appliances (1) Legal aspects (1) Liquid wastes. Sludge (1) Management systems (3) Materials and articles in contact with foodstuffs (1) Measurement of electrical and magnetic quantities (4) Mechanical testing of metals (1) Medical equipment in general (1) Metallic coatings (1) Natural gas (1) Networking (2) Non-destructive testing (1) Oilseeds (1) Open systems interconnection in general (1) Optoelectronics. Laser equipment (2) Other fasteners (2) Other fibre optic equipment (2) Other lifting equipment (1) Other medical equipment (1) Other semiconductor devices (1) Other services (1) Other standards related to aids for disabled and handicapped people (1) Other switchgear and controlgear (1) Paint coating equipment (1) Paper and board (3) Passenger cars. Caravans and light trailers (1) Pipelines and its parts for external sewage systems (1) Plastics in general (1) Plug-and-socket devices. Connectors (2) Potentiometers, variable resistors (1) Power transmission and distribution lines (1) Pressure regulators (1) Properties of surfaces (1) Protection against falling and slipping (1) Public buildings (2) Quantities and units (2) Radiation measurements (2) Radiographic equipment (1) Road construction materials (1) Safety of machinery (5) Seismic and vibration protection (1) Small craft (1) Small kitchen appliances (9) Solar energy engineering (1) Spices and condiments (2) Stationary source emissions (1) Steel pipes and tubes for specific use (1) Sterilization and disinfection in general (1) Street lighting and related equipment (2) Surgical instruments and materials (1) Technical aspects (7) Technical product documentation (1) TELECOMMUNICATIONS. AUDIO AND VIDEO ENGINEERING (12) Therapy equipment (1) Thermoplastic materials (4) Valves in general (2) Ventilation and air-conditioning systems (1) Ventilators. Fans. Air-conditioners (1) Vibration and shock with respect to human beings (1) Water supply systems (1) Waxes, bituminous materials and other petroleum products (1) Welded joints and welds (1) Woodworking machines (3)