Standartų projektų sąrašas

Paieškos frazė

Išplėstinė paieška

Žymuo

Direktyvos

Organizacija

ICS

Technikos komitetas

Užsienio komitetas

Darbo grupė

Etapas

Būsena

Komentavimo data

iki

Rezultatai

prEN ISO 24158-1 Viešoji apklausa

Komentavimo iki data 2025-12-02

Pakavimo mašinos. 1 dalis. Bendrieji saugos reikalavimai (ISO/DIS 24158-1:2025)

This document contains general requirements and measures for packaging machinery that performs packaging functions — to prepare product or packaging material for handling in packaging machinery; — to pack or create packages; — to unpack or disassemble packages; — to inspect product or packaging to ensure the quality or quantity; — to handle, arrange, or dispense product or packaging; — to perform auxiliary functions to enable the execution of packaging functions. Examples for packaging machines are: — filling machines; — closing machines; — labelling, decorating and coding machines; — cleaning, sanitizing, cooling and drying machines; — fill and seal machines; — inspection machines; — container and component handling machines; — form, fill and seal machines; — cartoning machines; — wrapping machines; — group packaging machines; — pallet or loading unit forming and dismantling machines; — pallet wrapping machines; — strapping machines; NOTE 1 These machines are used for primary (first) packaging, secondary (second) packaging and tertiary (third) packaging.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN ISO 6346 Viešoji apklausa

Komentavimo iki data 2025-11-11

Krovinių konteineriai. Kodavimas, identifikavimas ir ženklinimas (ISO/DIS 6346:2025)

1.1 This document provides a system for the identification and presentation of information about freight containers. The identification system is intended for general application, for example in documentation, control and communications (including automatic data processing systems), as well as for display on the containers themselves. The methods of displaying identification and certain other data (including operational data) on containers by means of permanent marks are included. 1.2 This document specifies: a) a container identification system, with an associated system for verifying the accuracy of its use, having: — mandatory marks for the presentation of the identification system for visual interpretation, and — features to be used in optional Automatic Equipment Identification (AEI) and electronic data interchange (EDI); b) a coding system for data on container size and type, with corresponding marks for their display; c) operational marks, both mandatory and optional; d) physical presentation of marks on the container. 1.3 All markings not denoted as ‘optional’ shall be considered mandatory. The terms “mandatory” and “optional” in this document are used to differentiate those ISO marking provisions which shall necessarily be fulfilled by all containers from those which are not required of all containers. The optional marks are included to further comprehension and promote uniform application of the optional mark. If a choice has been made to display an optional mark, the provisions laid down in this document relating to the mark shall be applied. The terms “mandatory” and “optional” do not refer to requirements of any regulatory body. 1.4 This document applies to all freight containers covered by International Standards ISO 668, parts 1 to 5 of ISO 1496, ISO 8323 and should, wherever appropriate and practicable, be applied: — to containers other than those covered by the International Standards mentioned in Clause 2; — to container-related and/or detachable equipment. NOTE 1 Containers marked according to previous editions of ISO 6346 need not be re-marked. 1.5 This document does not cover temporary operational marks of any kind, permanent marks, data plates, etc. which may be required by intergovernmental agreements, national legislation or nongovernmental organizations. NOTE 2 Some of the major international conventions whose container-marking requirements are not covered in this document are as follows: — International Convention for Safe Containers (1972, as amended) (CSC), International Maritime Organization (IMO); — Customs Convention on Containers 1956 and 1972, related to temporary admission and transport under customs seal. — Convention on Temporary Admission (Istanbul, 26 June 1990), related to temporary admission. It should not be assumed that this list is exhaustive. This document does not cover the display of technical data on tank containers (see ISO 1496-3), nor does it, in any way, include identification marks or safety signs for items of cargo which may be carried in freight containers.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN ISO 6599-1 Viešoji apklausa

Komentavimo iki data 2025-11-07

Pakuotė. Klimatinių bandymo sąlygų sudarymas. 1 dalis. Popieriniai maišai (ISO/DIS 6599-1:2025)

This document specifies the conditioning atmospheres and the method for conditioning samples of intact, empty paper sacks before and during testing. If only conventional paper tests are to be carried out on the material of a sack, samples of this material shall be cut out and conditioned as specified in ISO 187.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN ISO 8367-1 Viešoji apklausa

Komentavimo iki data 2025-11-11

Pakuotė. Bendrosios paskirties maišų leidžiamosios matmenų nuokrypos. 1 dalis. Popieriniai maišai (ISO/DIS 8367-1:2025)

This document specifies a set of tolerances applicable to the manufacture of paper sacks as defined in ISO 6590-1.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN 12726 Viešoji apklausa

Komentavimo iki data 2025-10-28

Stiklinė tara. 18,5 mm angos skersmens iš vidaus sandarinami kakleliai, skirti bandymą atidaryti rodantiems antkamščiams

This document specifies the dimensions of a mouth finish for stoppers and capsules for glass bottles containing a wine that has a carbonation not exceeding 1,2 g CO2/l, with internal sealing. Two options of finish height are proposed, 14 and 16 mm, the most common one being 16 mm. NOTE Carbonation over 1,2 g CO2/l requires a suitable container and stopper agreed between the glassmaker, the stopper manufacturer, and the packer/filler.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

Būtini slapukai

Statistikos slapukai

El. pašto prenumerata

Išplėstinė paieška

Rezultatai

Greitieji filtrai

Organizacija

Technikos komitetas

ICS