Standartų projektų sąrašas

Paieškos frazė

Išplėstinė paieška

Žymuo

Direktyvos

Organizacija

ICS

Technikos komitetas

Užsienio komitetas

Darbo grupė

Etapas

Būsena

Komentavimo data

iki

Rezultatai

prEN ISO 6338 Naujas

Komentavimo iki data 2026-06-08

SGD įrenginių išmetamo ŠESD kiekio skaičiavimo metodas (ISO 6338:2023)

This document provides a method to calculate the GHG emissions from an LNG liquefaction plant, onshore or offshore. The frame of this document ranges from the inlet flange of the LNG plant’s inlet facilities up to and including the offloading arms to truck, ship or railcar loading. The upstream supply of gas up to the inlet flange of the inlet facilities and the distribution of LNG downstream of the loading arms are only covered in general terms. This document covers: — all facilities associated with producing LNG, including reception facilities, condensate unit (where applicable), pre-treatment units (including but not limited to acid gas removal, dehydration, mercury removal, heavies removal), LPG extraction and fractionation (where applicable), liquefaction, LNG storage and loading, Boil-Off-Gas handling, flare and disposal systems, imported electricity or on-site power generation and other plant utilities and infrastructure (e.g. marine and transportation facilities). — natural gas liquefaction facilities associated with producing other products (e.g. domestic gas, condensate, LPG, sulphur, power export) to the extent required to allocate GHG emissions to the different products. — all GHG emissions associated with producing LNG. These emissions spread across scope 1, scope 2 and scope 3 of the responsible organization. Scope 1, 2 and 3 are defined in this document. All emissions sources are covered including flaring, combustion, cold vents, process vents, fugitive leaks and emissions associated with imported energy. The LNG plant is considered “under operation”, including emissions associated with initial start-up, maintenance, turnaround and restarts after maintenance or upset. The construction, commissioning, extension and decommissioning phases are excluded from this document but can be assessed separately. The emissions resulting from boil-off gas management during loading of the ship or any export vehicle are covered by this document. The emissions from a ship at berth, e.g. mast venting are not covered by this document. This document describes the allocation of GHG emissions to LNG and other hydrocarbon products where other products are produced (e.g. LPG, domestic gas, condensates, sulphur, etc.). This document defines preferred units of measurement and necessary conversions. This document also recommends instrumentation and estimations methods to monitor and report GHG emissions. Some emissions are measured and some are estimated. This document is applicable to the LNG industry. Applications include the provision of method to calculate GHG emissions through a standardized and auditable method, a means to determine their carbon footprint.

Peržiūrėti metaduomenis

prEN ISO 6338-2 Naujas

Komentavimo iki data 2026-06-07

Išmetamo šiltnamio efektą sukeliančių dujų (ŠESD) kiekio visoje suskystintų gamtinių dujų (SGD) grandinėje skaičiavimas. 2 dalis. Gamtinių dujų gavyba ir transportavimas į SGD įrenginius (ISO 6338-2:2024)

This document provides a method to calculate the greenhouse gas (GHG) emissions during natural gas production (onshore or offshore), gas processing and gas transport to liquefied natural gas (LNG) liquefaction plant. NOTE It can be applied to other gases as biogas or non-traditional types of natural gas. This document covers all facilities associated with producing natural gas, including: — drilling (exploration, appraisal, and development) and production wells; — gas gathering network and boosting stations (if any); — gas processing facilities (if any), transport gas pipelines with compression stations (if any) up to inlet valve of LNG liquefaction plant. This document covers facilities associated with producing other products (such as, but not limited to, domestic gas, condensate, Liquefied Petroleum Gas (LPG), sulphur, power export) to the extent required to allocate GHG emissions to each product. This document covers the upstream facilities “under operation”, including emissions associated with commissioning, initial start-up and restarts after maintenance or upset. This document does not cover the exploration, construction and decommissioning phases or the losses from vegetation coverage. This document covers all GHG emissions associated with production, process and transport of natural gas to the LNG liquefaction plant. These emissions spread across scope 1, scope 2 and scope 3 of the responsible organization, as defined in ISO 6338-1. All emissions sources are covered including flaring, combustion, cold vents, process vents, fugitive leaks and emissions associated with imported energy. Gases covered include CO2, CH4, N2O and fluorinated gases. This document does not cover compensation. This document defines preferred units of measurement and necessary conversions. This document also recommends instrumentation and estimations methods to monitor and report GHG emissions. Some emissions are measured; and some are estimated.

Peržiūrėti metaduomenis

Būtini slapukai

Statistikos slapukai

El. pašto prenumerata

Išplėstinė paieška

Rezultatai

Greitieji filtrai

Organizacija

Technikos komitetas

ICS