Standartų projektų sąrašas

prEN ISO 13136-2 Viešoji apklausa

Komentavimo iki data 2024-05-17

Maisto grandinės mikrobiologija. Šigos toksiną gaminančių Escherichia coli (STEC) aptikimas, išskyrimas ir apibūdinimas. 2 dalis. Bendrasis išskirtų Šigos toksiną gaminančių Escherichia coli (STEC) apibūdinimo metodas (ISO/DIS 13136‑2:2024)

This document is applicable to pure cultures of STEC. The present standard describes the characterization of STEC strains, isolated from any source. In particular, the characterization of STEC strains described here regard: - subtyping of the Stx-coding genes; - determination of the presence of eae gene; - determination of the presence of aggR gene; - identification of the presence of genes associated to the following serogroups: O157, O26, O111, O103, O145, O121 and O45. The full characterization of the isolated STEC strains is achieved by performing all the modules described here. The characterization scheme is not sequential, and the different modules can be implemented separately based on specific needs (e.g. Regulatory needs, Competent Authority’s requests, clients’ request). Alternative methods may be used, including Whole Genome Sequencing (WGS), provided these are verified according to the reference standard ISO 16140-2.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN 12608-4 Viešoji apklausa

Komentavimo iki data 2024-05-18

Neplastifikuoto polivinilchlorido (PVC-U) profiliuočiai, skirti langams ir durims gaminti. Klasifikavimas, reikalavimai ir bandymo metodai. 4 dalis. PVC-U profiliuočiai su terminiu būdu laminuotomis plėvelėmis

This document specifies the classifications, requirements and test methods for unplasticized poly(vinyl chloride) (PVC-U) profiles with thermo-laminated foils designed for external uses which are intended to be used for the fabrication of windows and doors. NOTE 1 For editorial reasons, in this document, the term "window" is used for window/door. NOTE 2 For the purpose of production control, test methods other than those specified in this document can be used.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN 15330-5 Viešoji apklausa

Komentavimo iki data 2024-05-18

Sporto aikštynų paviršiai. Dirbtinė veja ir tekstiliniai paviršiai. 5 dalis. Užpildų medžiagų specifikacija

This document: a) specifies minimum performance and durability and requirements for infill materials used in synthetic turf, and textile sports surfaces; b) describes how the performance of an infill is to be measured, and the results classified; c) specifies the physical and chemical properties of an infill that are to be declared in a manufacturer’s product declaration; d) specifies minimum production control tolerance to ensure consistency of infill materials between production batches; e) describes how reclaimed infill is to be tested to assess its suitability for reuse. NOTE 1 The sports performance characteristics of a synthetic turf or textile sports surface are provided by the combined characteristics of the synthetic turf or textile surface, any infill within the playing surface pile and any shockpad. The selection of the correct permutations of each is complex and the responsibility of the sports surface designer. NOTE 2 If infill materials migrate from a synthetic turf or textile sports surface into the surrounding natural environment, they become a source of contamination. To minimize the risk this occurring, guidance on how to prevent infill migration from the sports facility is given in CEN Technical Report PD CEN/TR 17519.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN ISO 15630-3 Viešoji apklausa

Komentavimo iki data 2024-05-12

Plienas betonui armuoti ir įtempti. Bandymo metodai. 3 dalis. Įtempiamoji armatūra (ISO/DIS 15630-3:2024)

This document specifies test methods applicable to prestressing steel (bar, wire or strand) for concrete. This document does not cover the sampling conditions that are dealt with in the product standards.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN ISO 16834 Viešoji apklausa

Komentavimo iki data 2024-05-17

Suvirinimo medžiagos. Stipriųjų plienų lankinio suvirinimo apsauginėse dujose vieliniai elektrodai, vielos, strypeliai ir prilydomieji metalai. Klasifikavimas (ISO/DIS 16834:2024)

ISO 16834:2012 specifies requirements for classification of wire electrodes, wires, rods and all-weld metal deposits in the as-welded condition and in the post-weld heat-treated (PWHT) condition for gas shielded metal arc welding and tungsten inert-gas welding of high-strength steels with a minimum yield strength greater than 500 MPa, or a minimum tensile strength greater than 570 MPa. One wire electrode can be tested and classified with different shielding gases. ISO 16834:2012 is a combined specification providing for classification utilizing a system based upon the yield strength and the average impact energy of 47 J of all-weld metal, or utilizing a system based upon the tensile strength and the average impact energy of 27 J of all-weld metal.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN ISO 23308-1 Viešoji apklausa

Komentavimo iki data 2024-05-15

Pramoninių krovinių vežimėlių energijos vartojimo efektyvumas. Bandymo metodai. 1 dalis. Bendrieji dalykai (ISO/DIS 23308-1:2024)

This document specifies general test criteria and requirements to measure the energy consumption for self-propelled industrial trucks (hereinafter referred to as trucks) during operation. For electric trucks, the efficiency of the battery and the battery charger is included. The truck specific requirements in ISO 23308‑2 and ISO 23308‑3 take precedence over the respective requirements of ISO 23308‑1. This document is applicable to the in-use phase of the product life cycle. It applies to the following truck types according to ISO 5053‑1: — counterbalance lift truck; — articulated counterbalance lift truck; — reach truck (with retractable mast or fork arm carriage); — straddle truck; — pallet-stacking truck; — pallet truck; — platform and stillage truck; — pallet truck end controlled; — order-picking truck; — centre-controlled order-picking truck; — towing, pushing tractor and burden carrier; — towing and stacking tractor; — side-loading truck (one side only); — variable-reach container handler; — counterbalance container handler; — lateral-stacking truck (both sides); — lateral-stacking truck (three sides); — multi-directional lift truck.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN 18064-1 Viešoji apklausa

Komentavimo iki data 2024-05-11

Plastikai. Kokybės rekomendacijos ir specifikacijų pagrindas, taikomi perdirbtų plastikų naudojimui gaminiuose. 1 dalis. Bendrieji aspektai

This document is the general part of the series that describes the designation system for plastic recyclates. This document is dealing with recyclates after the recycling operation and prior to converting and compounding (when applicable). It is dealing with preparation of samples and determination of properties. NOTE 1 This document supports the underlaying standards of this series that, per polymer type, provide an overview of the relevant characteristics and typical values for recyclates for use in certain application groups (product families) in combination with the relevant converting technologies. NOTE 2 The overview of the relevant properties is based on and further extends the relevant properties given in EN ISO 10350 1.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN 18064-3 Viešoji apklausa

Komentavimo iki data 2024-05-11

Plastikai. Kokybės rekomendacijos ir specifikacijų pagrindas, taikomi perdirbtų plastikų naudojimui gaminiuose. 3 dalis. Polipropilenas (PP)

This document provides relevant characteristics and typical values for polypropylene (PP) recyclates intended for groups of defined applications (the product families). The relevant characteristics and typical values for the different product families are derived from the performance requirements of the products belonging to that family, including requirements for product manufacturing processes where applicable. This document applies to plastic recyclates intended to be used for the manufacturing of (intermediate) products. This document is intended to be used in conjunction with part 1 of this standard series, which describes the designation system for plastic recyclates. The designation system allows comparison between recycled and virgin material at the level of the polymer’s defined designatory properties. NOTE 1 Examples of designations of plastic recyclates are given in Annex A. NOTE 2 The selection of relevant properties for a product family is based on EN ISO 10350 1, extended with specific properties related to plastic recyclates.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN 18064-7 Viešoji apklausa

Komentavimo iki data 2024-05-11

Plastikai. Kokybės rekomendacijos ir specifikacijų pagrindas, taikomi perdirbtų plastikų naudojimui gaminiuose. 7 dalis. Akrilnitrilo-butadieno-stireno kopolimeras (ABS)

This document provides relevant characteristics and typical values for Acrylonitrile-butadiene-styrene (ABS) recyclates intended for groups of defined applications (the product families). The relevant characteristics and typical values for the different product families are derived from the performance requirements of the products belonging to that family, including requirements for product manufacturing processes where applicable. This document applies to plastic recyclates intended to be used for the manufacturing of (intermediate) products. This document is intended to be used in conjunction with part 1 of this standard series, which describes the designation system for plastic recyclates. The designation system allows comparison between recycled and virgin material at the level of the polymer’s defined designatory properties. NOTE 1 Examples of designations of plastic recyclates are given in Annex A. NOTE 2 The selection of relevant properties for a product family is based on EN ISO 10350 1, extended with specific properties related to plastic recyclates.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN 18064-6 Viešoji apklausa

Komentavimo iki data 2024-05-11

Plastikai. Kokybės rekomendacijos ir specifikacijų pagrindas, taikomi perdirbtų plastikų naudojimui gaminiuose. 6 dalis. Polistirenas (PS)

This document provides relevant characteristics and typical values for polystyrene (PS) recyclates intended for groups of defined applications (the product families). The relevant characteristics and typical values for the different product families are derived from the performance requirements of the products belonging to that family, including requirements for product manufacturing processes where applicable. This document applies to plastic recyclates intended to be used for the manufacturing of (intermediate) products. This document is intended to be used in conjunction with part 1 of this standard series, which describes the designation system for plastic recyclates. The designation system allows comparison between recycled and virgin material at the level of the polymer’s defined designatory properties. NOTE 1 Examples of designations of plastic recyclates are given in the Annex A. NOTE 2 The selection of relevant properties for a product family is based on EN ISO 10350 1, extended with specific properties related to plastic recyclates.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN 18064-4 Viešoji apklausa

Komentavimo iki data 2024-05-11

Plastikai. Kokybės rekomendacijos ir specifikacijų pagrindas, taikomi perdirbtų plastikų naudojimui gaminiuose. 4 dalis. Polietilentereftalatas (PET)

This document provides relevant characteristics and typical values for PET recyclates intended for groups of defined applications (the product families). The relevant characteristics and typical values for the different product families are derived from the performance requirements of the products belonging to that family, including requirements for product manufacturing processes where applicable. This document applies to plastic recyclates intended to be used for the manufacturing of (intermediate) products. This document is intended to be used in conjunction with part 1 of this standard series, which describes the designation system for plastic recyclates. The designation system allows comparison between recycled and virgin material at the level of the polymer's defined designatory properties. NOTE 1 Examples of designations of plastic recyclates are given in the Annex A. NOTE 2 The selection of relevant properties for a product family is based on EN ISO 10350 1, extended with specific properties related to plastic recyclates.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN 18064-5 Viešoji apklausa

Komentavimo iki data 2024-05-11

Plastikai. Kokybės rekomendacijos ir specifikacijų pagrindas, taikomi perdirbtų plastikų naudojimui gaminiuose. 5 dalis. Polivinilchloridas (PVC)

This document provides relevant characteristics and typical values for poly(vinyl chloride) (PVC) recyclates intended for groups of defined applications (the product families). The relevant characteristics and typical values for the different product families are derived from the performance requirements of the products belonging to that family, including requirements for product manufacturing processes where applicable. This document applies to plastic recyclates intended to be used for the manufacturing of (intermediate) products. This document is intended to be used in conjunction with part 1 of this standard series, which describes the designation system for plastic recyclates. The designation system allows comparison between recycled and virgin material at the level of the polymer’s defined designatory properties. NOTE 1 Examples of designations of plastic recyclates are given in Annex A. NOTE 2 The selection of relevant properties for a product family is based on EN ISO 10350 1, extended with specific properties related to plastic recyclates.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN 18064-2 Viešoji apklausa

Komentavimo iki data 2024-05-11

Plastikai. Kokybės rekomendacijos ir specifikacijų pagrindas, taikomi perdirbtų plastikų naudojimui gaminiuose. 2 dalis. Polietilenas (PE)

This document provides relevant characteristics and typical values for polyethylene (PE) recyclates intended for groups of defined applications (the product families). The relevant characteristics and typical values for the different product families are derived from the performance requirements of the products belonging to that family, including requirements for product manufacturing processes where applicable. This document applies to plastic recyclates intended to be used for the manufacturing of (intermediate) products. This document is intended to be used in conjunction with part 1 of this standard series, which describes the designation system for plastic recyclates. The designation system allows comparison between recycled and virgin material at the level of the polymer's defined designatory properties. NOTE 1 Examples of designations of plastic recyclates are given in Annex A. NOTE 2 The selection of relevant properties for a product family is based on EN ISO 10350 1, extended with specific properties related to plastic recyclates.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN 13203-1 Viešoji apklausa

Komentavimo iki data 2024-05-11

Dujiniai buitiniai karšto vandens ruošimo prietaisai. 1 dalis. Karšto vandens tiekimo parametrų įvertinimas

This document is applicable to gas-fired appliances producing domestic hot water. It applies to both instantaneous and storage appliances; water-heaters and combination boilers that have: - heat input not exceeding 70 kW; and - hot water storage capacity (if any) not exceeding 500 l. In the case of combination boilers, with or without storage tank, domestic hot water production is integrated or coupled, the whole being marketed as a single unit. This document sets out in qualitative and quantitative terms the performance in delivery of domestic hot water for a selected variety of uses. It also gives a system for presenting the information to the user.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN ISO 17633 Viešoji apklausa

Komentavimo iki data 2024-05-12

Suvirinimo medžiagos. Nerūdijančiųjų ir kaitrai atsparių plienų lankinio suvirinimo apsauginėse dujose arba be jų miltelinės elektrodinės vielos ir strypeliai su užpildu. Klasifikavimas (ISO/DIS 17633:2024)

ISO 17633:2017 specifies requirements for classification of tubular flux and metal cored electrodes and rods, based on the all-weld metal chemical composition, the type of core, shielding gas, welding position and the all-weld metal mechanical properties, in the as-welded or heat-treated conditions, for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels. ISO 17633:2017 is a combined standard providing for classification utilizing a system based upon nominal composition or utilizing a system based upon alloy type. a) Clauses, subclauses, and tables which carry the suffix letter "A" are applicable only to products classified using the system based upon nominal composition. b) Clauses, subclauses, and tables which carry the suffix letter "B" are applicable only to products classified using the system based upon alloy type. c) Clauses, subclauses, and tables which do not have either the suffix letter "A" or the suffix letter "B" are applicable to all products classified in accordance with this document. ISO 17633:2017 does not use pulsed current for determining the product classification.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN ISO 11073-10206 Viešoji apklausa

Komentavimo iki data 2024-06-15

Sveikatos informatika. Įtaisų funkcinis suderinamumas. 10206 dalis. Ryšys tarp asmeninių medicinos įtaisų. Abstraktusis turinio informacijos modelis (ISO/IEEE/FDIS 11073-10206:2024)

This standard defines an object-oriented abstract information model to represent a PHD and the observations generated by a PHD. It specifies what information needs to be present and the relationships between the informational elements in the model. It models observations in a generic way by focusing on the information content contained in the presentation of health measurements. The modeling follows the practice of ISO/IEEE 11073-20601 [B12] where Unified Modeling Language (UML) is used to describe a set of objects and the relationship between the objects.7 Tables provide descriptions of the attributes in the objects. IEEE 11073-10101™ nomenclature terms are used to express clinical content. This standard provides guidance as to what an exchange protocols needs to communicate to properly represent health observations, but is not, in itself, sufficient to be an exchange protocol. However, the content model defined herein does have sufficient detail to help organizations validate that there is no loss of the semantic content induced by data exchanges in a protocol adhering to this standard. This standard does not define a security framework.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

Išplėstinė paieška

Rezultatai

Greitieji filtrai

Organizacija

Technikos komitetas

ICS

Būtini slapukai

Statistikos slapukai

El. pašto prenumerata

Standartų projektų sąrašas

Išplėstinė paieška

Rezultatai

Greitieji filtrai

Organizacija

Technikos komitetas

ICS